Airborne streak tube imaging LiDAR (STIL) consists of several different data-generating subsystems and introduces system errors each time it is installed on an aircraft. These errors change with each installation, which makes the parametric calibration of the LiDAR meaningless. In this study, we propose a high-precision reconstruction method for point clouds that can be used without calibrating the system parameters. In essence, after each remote sensing measurement, a self-checking process is performed with experimental data to replace the fixed system parameters. In this process, the splicing error of the same region measured under different conditions is used as a criterion to optimize the reconstruction parameters via a particle swarm optimization (PSO) algorithm. For a detection distance of 3000 m, the elevation error of the point cloud reconstruction reaches more than 1 m if the placement parameters are not optimized; after optimization, the elevation error can be controlled within 0.3 m.
Owing to the special working systems of streak tube imaging lidar (STIL), the time and space dimensions are coupled together on the streak images. This coupling can cause measurement errors in 3D point clouds and can make measurement results more complicated to calibrate than other kinds of lidars. This paper presents a method to generate a time calibration array and an angle calibration array to separate the offset of the streak into time dimension and space dimension. The time and space information of the signal at any position on the streak image can be indexed through these two arrays. A validation experiment on aircraft was carried out, and the range error of the 3D point cloud was improved from 0.41 m to 0.27 m using the proposed calibration method. Thus, using the proposed calibration method can improve the accuracy of the point cloud produced by STIL.
Micro-pulse photon-counting LiDAR has difficulty accurately extracting geophysical information in strong-noise environments, with solar noise interference being a key limiting factor. This study proposes a hierarchical coarse-to-fine denoising framework, combining grid-based pre-filtering with an optimized horizontal and vertical recursive division method using Otsu’s method to achieve high time efficiency and denoising accuracy. First, an adaptive meshing strategy is employed to remove most of the noise in the data while retaining more than 99.1% of the signal. Subsequently, an alternating horizontal and vertical recursive division algorithm with automatically selected parameters is applied for denoising; the method was validated on ICESat-2 ATL03 data, GlobeLand30 V2020 data, and USGS 3DEP airborne radar data, where the method achieved a classification accuracy of more than 91.2%, with a several-fold reduction in runtime compared to traditional clustering methods. The framework demonstrates high efficiency, robustness, and computational scalability across diverse terrains, including polar, forest, and plains. It can contribute to geographic mapping, environmental protection, and ecological monitoring.
When LiDAR detects underwater targets, the water severely attenuates the laser beams, making it impossible to extract valid echo information during 3D reconstruction of urban water bodies. This study proposes a Multi-Scale Spectral Adaptive Loss Generative Adversarial Network Based on Morphology-Spatiotemporal Decoupled Attention (MSAGAN) that effectively enhances far-field underwater echo signals for LiDAR. Its core components consist of three parts: Morphology-Aware Dynamic Receptive Field Attention (MADRA), Spatial-Temporal Decoupled Frequency-Enhanced Global Feature Fusion Block (STDFBlock), and Adaptive Dynamic Adjustment Loss Function Based on Frequency-Domain Decomposition and Gradient Response (FGADLoss). The model precisely identifies the narrow and curved local structures of the echo signals during the feature extraction process, improving the precise detection of subtle structural changes in the echo signals and enabling the extraction of valid echo signal features from a background of numerous invalid echo signals. The model reduces image fragmentation and center-of-mass drift during echo signal augmentation, improving the accuracy of water body environments’ 3D reconstruction. Through this model, the average point cloud density per square meter for lakes and ponds increased by 2.12 and 3.54, respectively, enabling effective reconstruction of urban water bodies information and offering a high-quality data basis for underwater object recognition and bathymetric surveying. Furthermore, this method effectively addresses the challenge of simultaneously obtaining degraded and ideal streak images that match the echo signals of underwater detection targets, and it also offers advantages in terms of training data requirements, making it particularly well-suited for real-world underwater detection scenarios where paired ideal-degraded data is scarce.