Octyl formate is an important substance used in the perfume industry in products such as cosmetics, perfumes, and flavoring. Octyl formate is mostly produced by chemical catalysts. However, using enzymes as catalysts has gathered increasing interest due to their environment-friendly proprieties. In the present study, we aimed to identify the optimal conditions for the synthesis of octyl formate through immobilized enzyme-mediated esterification. We investigated the effects of enzymatic reaction parameters including the type of immobilized enzyme, enzyme concentration, molar ratio of reactants, reaction temperature, and type of solvent using the optimization method of one factor at a time (OFAT). The maximum conversion achieved was 96.51% with Novozym 435 (15 g/L), a 1:7 formic acid to octanol ratio, a reaction temperature of 40 °C, and with 1,2-dichloroethane as solvent. Moreover, we demonstrated that the Novozym 435 can be reused under the optimal conditions without affecting the octyl formate yield, which could help reduce the economic burden associated with enzymatic synthesis.
Biorefineries are attracting attention as an alternative to the petroleum industry to reduce carbon emissions and achieve sustainable development. In particular, because forests play an important role in potentially reducing greenhouse gas emissions to net zero, alternatives to cellulose produced by plants are required. Bacterial cellulose (BC) can prevent deforestation and has a high potential for use as a biomaterial in various industries such as food, cosmetics, and pharmaceuticals. This study aimed to improve BC production from lignocellulose, a sustainable feedstock, and to optimize the culture conditions for Gluconacetobacter xylinus using Miscanthus hydrolysates as a medium. The productivity of BC was improved using statistical optimization of the major culture parameters which were as follows: temperature, 29 °C; initial pH, 5.1; and sodium alginate concentration, 0.09% (w/v). The predicted and actual values of BC production in the optimal conditions were 14.07 g/L and 14.88 g/L, respectively, confirming that our prediction model was statistically significant. Additionally, BC production using Miscanthus hydrolysates was 1.12-fold higher than in the control group (commercial glucose). Our result indicate that lignocellulose can be used in the BC production processes in the near future.
Ga2O3/4H-SiC n-n isotype heterojunction diodes were fabricated by depositing Ga2O3 thin films by RF magnetron sputtering. The influence of annealing atmosphere on the film quality and electrical properties of Ga2O3 layers was investigated. X-ray diffraction (XRD) analysis showed a significant increase in the peak intensities of different faces of β-Ga2O3 {(−201), (−401) and (002)}. X-ray photoelectron spectroscopy (XPS) measurement showed that the atomic ratio of oxygen increases under high-temperature annealing. Moreover, an N2-annealed diode exhibited a greater rectifying ratio and a lower thermal activation energy owing to the decrease in oxygen-related traps and vacancies on the Ga2O3 film and Ga2O3–metal interface.
Schottky diode-based temperature sensors are the most common commercially available temperature sensors, and they are attracting increasing interest owing to their higher Schottky barrier height compared to their silicon counterparts. Therefore, this paper presents a comparison of the thermal sensitivity variation trend in temperature sensors, based on dual 4H-SiC junction barrier Schottky (JBS) diodes and Schottky barrier diodes (SBDs). The forward bias current–voltage characteristics were acquired by sweeping the DC bias voltage from 0 to 3 V. The dual JBS sensor exhibited a higher peak sensitivity (4.32 mV/K) than the sensitivity exhibited by the SBD sensor (2.85 mV/K), at temperatures ranging from 298 to 573 K. The JBS sensor exhibited a higher ideality factor and barrier height owing to the p–n junction in JBS devices. The developed sensor showed good repeatability, maintaining a stable output over several cycles of measurements on different days. It is worth noting that the ideality factor and barrier height influenced the forward biased voltage, leading to a higher sensitivity for the JBS device compared to the SBD device. This allows the JBS device to be suitably integrated with SiC power management and control circuitry to create a sensing module capable of working at high temperatures.
Metal, typically gold [Au], nanoparticles [NPs] embedded in a capping metal contact layer onto silicon carbide [SiC] are considered to have practical applications in changing the barrier height of the original contacts. Here, we demonstrate the use of silver [Ag] NPs to effectively lower the barrier height of the electrical contacts to 4H-SiC. It has been shown that the barrier height of the fabricated SiC diode structures (Ni with embedded Ag-NPs) has significantly reduced by 0.11 eV and 0.18 eV with respect to the samples with Au-NPs and the reference samples, respectively. The experimental results have also been compared with both an analytic model based on Tung's theory and physics-based two-dimensional numerical simulations.