This study presents a methodology for assessing neutronics models of JT-60SA by comparing simulated neutron spectra with spectra reconstructed from neutron activation measurements. The analysis was performed using synthetic data generated with the Monte Carlo N-Particle (MCNP) radiation transport code for an existing model, as the final detailed tokamak model remains under development. Rather than limiting the assessment to a direct comparison with activation measurement, the proposed approach incorporate neutron spectrum reconstruction as a complementary method to evaluate agreement between simulated and actual spectra. The analysis demonstrates the feasibility and potential of the methodology rather than reproducing experimental conditions. Several spectrum unfolding techniques were applied: Tikhonov Regularisation, Minimum Fisher Information, Maximum Entropy, and Maximum Likelihood. Results were additionally combined into an average reconstructed spectrum to reduce method-dependent differences. The MCNP-calculated spectrum for the P10 port was used in FISPACT-II, advanced nuclear simulation software, to simulate foil activation. The reconstructed spectra and FISPACT-II activities were compared against reference MCNP data. Irradiation was assumed to last the entire experimental campaign. Longer irradiation time limits the activation foil set and increases reconstruction uncertainty. Results demonstrate that the high-intensity region of the neutron spectrum can be reconstructed with an uncertainty below 25%. Performing reconstructions separately across distinct energy ranges enables accurate determination of dominant high-intensity peaks despite numerical challenges from large intensity gradients. Shorter irradiation time allows the use of additional dosimetry foils, reducing the overall reconstruction uncertainty to approximately 23% for the full spectrum. Individual unfolding methods reproduce different spectral regions with varying accuracy, whereas averaging results reduces the discrepancy between the reconstructed and reference spectra. The study demonstrates the potential of combining established reconstruction methods for complementary assessment of neutronics simulations and identifies the treatment of large spectral intensity gradients as an important area for further methodological development.
Nuclear energy production requires robust shielding solutions to ensure the safety of personnel and equipment across a wide range of reactor technologies. Shield for Fusion (S4F) is a new development in nuclear analysis models, and codes a computational framework for optimizing radiation shielding design in fusion reactor applications using OpenMC neutronics simulations and genetic algorithms (GAs). The framework addresses four-layer shielding cabinets with six commercially viable materials, exploring 10,000 possible configurations through a template-based approach with density correction factors. The genetic algorithm efficiently converges to optimal solutions in approximately 100 simulations by balancing competing objectives: neutron flux attenuation, dose minimization, material cost, and weight. Compared to uniform sampling, the GA demonstrates superior performance by identifying high-performing parameter regions with improved attenuation and reduced cost. The framework includes an inverse design tool for rapid retrieval of configurations matching target performance criteria requested by external users, currently available for selected neutron source spectra. Results demonstrate effective multi-objective optimization for fusion shielding applications, with the open-source code available for adaptation to different simulation setups.