Li-ion battery reliability has attracted significant research attention, but few studies have incorporated in-service performance and reliability data of batteries installed within a product. This paper investigates battery drain, unexpected shutdowns, and slow performance associated with Li-ion batteries, with a focus on Apple iPhones. as a case study. The actions taken by Apple in response to these performance issues are discussed, especially from the perspective of Li-ion battery degradation. It is shown that not all battery reliability issues can be attributed to normal battery degradation; battery manufacturing defects and high C-rate applications are also shown to be contributors to battery reliability and performance issues including those causing low state of charge, low state of health, and unexpected shutdowns.
The smart electricity meter (SEM) is an important part of smart power grid, and the accuracy of SEMs is the basis for power grid operation control and trade settlement between power supply and electricity consumption, but the evolution behaviors of metering error of SEMs under field operation conditions have not yet been identified. The SEMs were installed and operated on site, metering error data were collected under various temperature and current conditions. The influences of current, power coefficient, and temperature on metering error and consistency were analyzed separately with the help of quadratic polynomials, and then an integrated model elaborating the joint effects of multi-stress was developed based on a binary quadratic polynomial. We find that a lower temperature and a larger current result in a higher metering error of SEMs; however, the effects of current on metering error are determined by power coefficients. The results have reference value for remote metrological verification, error monitoring, and the optimization of the operation and maintenance scheme of SEMs.
The working conditions of planetary gearboxes are complex, and their structural couplings are strong, leading to low reliability. Traditional deep neural networks often struggle with feature learning in noisy environments, and their reliance on one-dimensional signals as input fails to capture the interrelationships between data points. To address these challenges, we proposed a fault diagnosis method for planetary gearboxes that integrates Markov transition fields (MTFs) and a residual attention mechanism. The MTF was employed to encode one-dimensional signals into feature maps, which were then fed into a residual networks (ResNet) architecture. To enhance the network’s ability to focus on important features, we embedded the squeeze-and-excitation (SE) channel attention mechanism into the ResNet34 network, creating a SE-ResNet model. This model was trained to effectively extract and classify features. The developed method was validated using a specific dataset and achieved an accuracy of about 98.1%. The results demonstrate the effectiveness and reliability of the developed method in diagnosing faults in planetary gearboxes under strong noise conditions.
The performance and reliability of lithium thionyl chloride (Li/SOCl2) batteries are significantly affected by temperature, but the reliability level and failure mechanisms of Li/SOCl2 batteries remain unclear. In this study, Weibull distribution statistics were used to infer the life expectancy of Li/SOCl2 batteries at different temperatures. Additionally, the battery failure mechanism was analyzed using electrochemical impedance spectroscopy (EIS). It is found that under the discharge condition of 7.5 kΩ load, the mean time between failures (MTBF) and reliable life of the battery decreased with increasing operating temperature. Under the discharge condition of 750 Ω load, the MTBF of the battery peaked at 60 °C. Furthermore, the influence of temperature on the voltage output characteristics of Li/SOCl2 batteries and the voltage hysteresis were analyzed. Both the battery output voltage and the hysteresis effect increased with rising temperature. This is because high temperature accelerates internal battery reactions, thus altering the formation process of the passivation film on the lithium metal negative electrode.
Ordering decision-making on spare parts is crucial in maximizing aircraft utilization and minimizing operating costs. This paper develops an approach of ordering decision-making for civil aircraft spare parts based on a one-sample prediction. Engineering background for line replace units, failure/replace processes, and spare parts requirements are represented. The model for future failure time is proposed based on the conditional probability density function of the failure time. A Weibull process with failure truncated and time truncated is employed to establish the prediction model. The point estimates and prediction bounds for future failure time are provided. Moreover, a prediction procedure for spare parts is investigated by identifying the ordering time and ordering quantity. Finally, a case study illustrates the developed method by predicting the spare parts as well as future failure time for engine-driven pumps. The predicted results are compared with the reality to demonstrate the effectiveness of the developed method.