High penetration of distributed generation (DG) is mainly constrained by voltage related issues. Due to the uncertainties associated with type, size and location of DGs, it is difficult to quantify their integration limits in distribution networks, i.e., hosting capacity (HC). To address this issue, this paper proposes a probabilistic based framework to determine the maximum integration limits of DGs considering the voltage rise and voltage deviation constraints. Such framework requires use of the HC model, which can be formulated as a nonlinear optimization problem. Adding the voltage deviation constraint in the HC problem makes the model unsolvable. We address this issue by proposing a two-step algorithm to linearize the HC model. Then, using the linearized model, a probabilistic framework is proposed for considering the load variability and DGs uncertainties. To validate the efficacy and accuracy of the proposed framework, we identify the HC of a balanced and an unbalanced distribution networks and compare our results with those obtained from comprehensive power flow method and the traditional conservative planning. Finally, using the proposed framework, the impact of voltage deviation constraint, load growth, DG type and network structure on the HC are comprehensively studied using different DG technologies (i.e., Photovoltaics and wind).
Increased penetration of power electronics interfaced renewable energy sources-based generation, for instance, wind farms, that displaces much of the conventional synchronous generation, has a profound effect on the inertia of modern/future power system networks. This article presents the development and validation of artificial neural network (ANN)-based tools, utilizing the power system variables measured by phasor measurement units through wide-area measurements systems, for estimation/forecasting of power system inertia with high penetration of wind farms. The development stage involves the correlation analysis to identify the best power system variables that can be nominated as inputs, and the training of the proposed inertia forecasting tools with the best-nominated inputs that are highly correlated with the power system inertia. Whereas, in the validation stage, the functionality of the trained ANN-based inertia forecasting tools have been validated using the hardware-in-the-loop testing facility developed at the University of Manchester. The development and validation procedures of the proposed inertia forecasting tools have been demonstrated on the IEEE 9-bus modified test system. The validation results revealed the effectiveness of the proposed inertia forecasting tools in estimating the inertia of modern/future power system networks with high penetration of wind farms.
15 September 2017 in IEEE Transactions on Smart Grid
The increasing uptake of residential PV-battery systems is bound to significantly change demand patterns of future power systems and, consequently, their dynamic performance. In this paper, we propose a generic demand model that captures the aggregated effect of a large population of price-responsive users equipped with small-scale PV-battery systems, called prosumers, for market simulation in future grid scenario analysis. The model is formulated as a bi-level program in which the upper-level unit commitment problem minimizes the total generation cost, and the lower-level problem maximizes prosumers’ aggregate self-consumption. Unlike in the existing bi-level optimization frameworks that focus on the interaction between the wholesale market and an aggregator, the coupling is through the prosumers’ demand, not through the electricity price. That renders the proposed model market structure agnostic, making it suitable for future grid studies where the market structure is potentially unknown. As a case study, we perform steady-state voltage stability analysis of a simplified model of the Australian National Electricity Market with significant penetration of renewable generation. The simulation results show that a high prosumer penetration changes the demand profile in ways that significantly improve the system loadability, which confirms the suitability of the proposed model for future grid studies.
1 March 2016 in Sustainable Energy, Grids and Networks
Development of phasor measurement units (PMUs) and wide‐area measurement systems in power systems has enabled transmission system operators to monitor and assess the performance of their grids in real‐time. In this study, a new practical method is proposed and prototyped for real‐time monitoring of transient and short‐term voltage stability using synchrophasor data obtained from PMUs. In the previous related studies, methods for detecting rotor angle and voltage instabilities were presented regardless of how they can be implemented and exploited in real settings. In this study, the authors present a framework considering practical concerns, such as noise of measurements and software requirements. The well‐known Lyapunov exponent (LE) concept is used in the heart of the authors’ methodology. Their methodology uses time‐series data obtained from PMUs for calculating LEs, and by averaging the latest data packages received in the control centre, the performance of their framework is significantly improved under noisy measurements. As the framework is mission‐critical, they considered a suitable architecture merged with a flexible human–computer interaction with the goals of increasing security, reliability, resilience, robustness, and efficiency. Simulation results demonstrate the capability of their framework in fast and accurate assessment of short‐term stability using the IEEE 9‐bus and 69‐bus test systems.