Symeon Sergiyovich Yesypchuk

Dr. Symeon Sergiyovich Yesypchuk

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 February 2022 in Technology audit and production reserves
Verified
Journal Article
Open access
PDF file
ANAl-Khyatt Muhamad Nadhem
Al-Khyatt Muhamad Nadhem
MSMaksym Skydanenko
Maksym Skydanenko
RORuslan Ostroha
Ruslan Ostroha
ANAnna Neshta
Anna Neshta
Mykola YukhymenkoMykola Yukhymenko
Mykola Yukhymenko
OMOleksii Moskalchuk
Oleksii Moskalchuk
The object of research is granulation of mineral fertilizers by the rolling method. One of the most problematic places is the uncertainty of the conditions of the temperature regime of granulation. The paper considers the technology for obtaining enlarged urea granules of prolonged action. It is indicated that an increase in the diameter of the granules to 7–10 mm increases the efficiency of the use of mineral fertilizers by the consumer. It is proposed to obtain large carbamide granules by rolling in a plate granulator. It is indicated that the setting of the optimal operating parameters of the tray granulator is an important factor in the efficient operation of the equipment. A scheme of a pilot plant for granulating mineral fertilizers is presented, a methodology for conducting experimental studies and design parameters of a plate granulator are described. It is indicated that in the process of experimental studies, the design parameters changed: the tilt angle of the plate, the height of the side and the frequency of rotation of the plate, the angle of opening of the spray jet by the hydraulic nozzle. In the process of research, the influence of regime and technological parameters, namely, the temperature of the layer on the plate is studied. As a result of experimental studies, the optimal ranges of design and regime-technological parameters for obtaining enlarged carbamide granules in a plate granulator were revealed. The influence of the location of the nozzle for spraying the melt on the layer relative to the plane of the plate is shown, which results in the particle size distribution of the granular product. It is indicated that a higher content of the commercial fraction in the finished product is observed when the layer in the left sector of the upper part of the plate is irrigated by the rising melt. A technique for determining the static strength of the obtained carbamide granules is given. A calculation equation for determining the static strength of a granule is presented. A diagram of a laboratory device for determining the static strength of granules is presented, which made it possible to determine the values of the static strength of granules for individual fractions, namely: for coarse, fine and commercial fractions. It is shown that the obtained values correlate well with standardized indicators.

16 September 2026 in Fluids
Verified
Journal Article
Open access
PDF file
SYSymeon Sergiyovich Yesypchuk
Symeon Sergiyovich Yesypchuk
Oleksandr LiaposhchenkoOleksandr Liaposhchenko
Oleksandr Liaposhchenko
Ján PiteľJán Piteľ
Ján Piteľ
MSMaksym Skydanenko
Maksym Skydanenko
SVSklabinskyi Vsevolod
Sklabinskyi Vsevolod
Vitalii IvanovVitalii Ivanov
Vitalii Ivanov
In modern industrial processes, particularly in the oil and gas, mining, and chemical sectors that handle complex multiphase flows (gas–liquid–solid), enhancing vortex separators is a critical engineering task to ensure the efficient separation of raw materials. The hydrodynamic characteristics and energy losses of such devices are directly dependent on their geometric configuration. Given that the direct simulation of three-phase systems is highly computationally intensive, this study conducts an essential foundational step: the comparative numerical simulation of single-phase hydrodynamic behavior across nine configurations of vortex chambers with tangential inlets. This research aims to evaluate the impact of geometric modifications on vortex formation, velocity and pressure fields, pressure drop, and hydraulic resistance within the investigated range of inlet velocities from 1 to 10 m/s. Based on the numerical results, Model 8, featuring a bi-conical expansion section, exhibits the most favorable hydrodynamic performance in terms of the ratio of flow swirl intensity to energy losses. It ensures stabilization of the vortex core, high rotational velocity, and an optimal pressure drop, thereby generating the hydrodynamic potential necessary for subsequent phase separation. Limiting the inlet velocity to 10 m/s prevents chaotic turbulence and local flow separation within the expansion zone. The derived geometry and the established hydrodynamic patterns provide a robust foundation for future numerical simulations of two- and three-phase media.