Amirhossein Malekipour

Dr. Amirhossein Malekipour

orcid

Research Focus & Metrics

Representative Publications

View All Publications
3 November 2022 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Open access
AMAmirhossein Malekipour
Amirhossein Malekipour
ACAdrien Corne
Adrien Corne
LGLauric Garbuio
Lauric Garbuio
PGPierre Granjon
Pierre Granjon
LGLaurent Gerbaud
Laurent Gerbaud
In this article, a novel sensorless control for permanent magnet synchronous machine (PMSM) using its radiated acoustic noise is proposed in which a high-frequency voltage signal is superimposed upon the fundamental excitation and the machine response to such excitation is studied. First, the analytical equations describing the field formation within the airgap leading to the generation of radial forces and acoustic noise are extensively investigated. In the next step, resulting harmonics in the acoustic noise waveform caused by the injected signals are predicted. Then it is experimentally verified that, depending on the machine structure, there will be some distinctive sidebands around the injected frequency directly related to the fundamental synchronous frequency. Acoustic noise waveform is highly distorted and sensitive to the environment; so a proposed four-stage signal processing algorithm containing two self-adaptive band-pass filters are used to safeguard the signal against unwanted distortions and flawlessly extract the rotor position information. Robustness and effectiveness of this method are verified experimentally in various operating conditions.

17 November 2020 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
AMAmirhossein Malekipour
Amirhossein Malekipour
SNSayed Morteza Saghaian Nejad
Sayed Morteza Saghaian Nejad
ARAmir Rashidi
Amir Rashidi
Although Switched Reluctance Motors have many advantages, vibration is known as their most severe drawback acting as an impediment limiting their widespread use in industrial and domestic applications. Through electromechanical relationships, it is shown that the first-order time derivative of applied phase voltage and second-order time derivative of radial force directly affect the amplitude of generated vibration, especially at the beginning of demagnetization instance. Therefore, a set of criteria is stated in this paper meeting which ensures having low vibration intensity. In this paper, three types of demagnetization voltages are proposed which comprehensively meet the stated criteria. These voltages share the same characteristics contributing to the vibration reduction in Switched Reluctance Motor. Two vital parameters of Synchronous Counter and Coefficient are included in the proposed demagnetization voltages which must be meticulously chosen in order to be effective. Noticeable contribution of the proposed methods to the vibration alleviation is validated through simulation and experimental tests conducted under different working conditions.

27 September 2023 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
AMAmirhossein Malekipour
Amirhossein Malekipour
ACAdrien Corne
Adrien Corne
LGLauric Garbuio
Lauric Garbuio
PGPierre Granjon
Pierre Granjon
LGLaurent Gerbaud
Laurent Gerbaud
This article introduces an injectionless approach for acoustic-noise-based sensorless control of the permanent magnet synchronous machine. Replacing the high-frequency injection, the pulsewidth modulation (PWM) voltages are used as the basis for the method implementation. The mathematical model of PWM with considering the deadtime effect is first presented. Then, its impact upon the harmonics of current, magnetic fields, and generated radial forces is detailed. It is experimentally verified that in the presence of deadtime, unlike the contaminated current profile, there are merely specific-order speed-dependent components appeared in the acoustic noise spectrum, which is a clear bonus for signal processing precision and estimation performance. Moreover, a novel phase-locked loop (PLL) topology comprising a resonant-controller-based feedforward compensation block (RCPLL) is proposed. This compensation block is integrated within the PLL, by which the extra harmonics in the PLL error are directly suppressed, and therefore, the estimation performance is noticeably enhanced. The robustness of the proposed sensorless algorithm, alone, is verified experimentally under different conditions, and then, the estimation performances with and without the proposed RCPLL are compared.

8 April 2026
Verified
Thesis
Closed access
AMAmirhossein Malekipour
Amirhossein Malekipour
Contrôle sans capteur basé sur le bruit acoustique d'une Machine Synchrone à Aimants Permanents: Un nouveau système de contrôle sans capteur pour les machines synchrones à aimants permanents (MSAP), qui repose sur l'extraction de l'information de position du rotor à partir du bruit acoustique généré lors du fonctionnement, est présenté dans cette thèse. La thèse examine en détail la nature des champs d'entrefer électromagnétiques, des forces radiales d'entrefer, ainsi que des vibrations et du bruit acoustique d'origine électromagnétique qui en résultent.Cette thèse propose deux nouveaux algorithmes sans capteur sont utilisant soit l'injection sinusoïdale à haute fréquence (IHF) habituelle, soit des impulsions de tension PWM intégrées. Pour extraire l'information de position du rotor, la thèse introduit des algorithmes de traitement du signal appropriés. Bien que les signaux souhaités soient correctement extraits lors de l'étape de traitement du signal, des harmoniques supplémentaires apparaissent dans la vitesse et la position estimées. Pour résoudre les problèmes qui en découle, la thèse propose deux observateurs novateurs, appelés RCPLL et ADALINE-PLL.En conclusion, la stabilité, la robustesse et la fiabilité des algorithmes sans capteur proposés sont étayées par des tests expérimentaux réalisés à travers divers points de fonctionnement statiques et dynamiques. De plus, la performance au démarrage est comparée à celle des algorithmes sans capteur conventionnels, révélant des réponses similaires et satisfaisantes en régime permanent et en transitoire. Ces résultats indiquent fortement la fiabilité et l'efficacité des méthodes sans capteur proposées.

1 September 2026 in Energies
Verified
Journal Article
Open access
PDF file
BYBortecene Yildirim
Bortecene Yildirim
Mehmet KulanMehmet Kulan
Mehmet Kulan
MDMohamed Dahidah
Mohamed Dahidah
AMAmirhossein Malekipour
Amirhossein Malekipour
MMMichael Merlin
Michael Merlin
This paper presents the design and multi-objective optimization of a six-limb magnetically integrated hybrid distribution transformer (HDT). The increasing demand for efficient and compact transformer solutions in modern distribution networks motivates the development of improved design methodologies. In this work, a detailed design procedure is established, including core geometry definition, winding configuration, and magnetic circuit considerations. A multi-objective optimization framework is formulated to minimize total transformer mass and power losses while satisfying operational constraints such as magnetic flux density and current density limits in the windings. Key design parameters, including core dimensions and winding configurations, are systematically varied to identify an optimal trade-off between material usage and performance. The optimization results show a noticeable reduction in total mass with a slight improvement in total losses, while all design constraints are maintained within acceptable limits. A laboratory-scale prototype was constructed to demonstrate the proposed magnetic configuration, and experimental validation was performed under steady-state, open-loop operating conditions to verify the voltage injection principle through the integrated control and extension windings. The presented approach offers a structured pathway for the design and optimization of HDT and can serve as a basis for further studies involving advanced control and operational strategies.