Ship emulsified oil wastewater was used as the research object in this study. The highly efficient coagulant demulsification degreasing mechanism and microbubble flotation technology were combined and the effects of coagulant type and dosage amount on the demulsification of emulsified oil wastewater were evaluated. The influence of the mixed coagulation effect of pH values, temperature, and hydraulic condition parameters were determined and water intake, air intake, and oil content were regulated. The coagulant for the demulsification of emulsified oil wastewater was screened; the dosage was 500 mg L⁻¹, and the removal capacity of the coagulant was in the following order: polyaluminum ferric chloride (PAFC) > polyaluminum chloride (PAC) > polysilicate aluminum ferric sulfate (PSAFS) > alum > Al₂(SO₄)₃ > polyferric sulfate > FeCl₃. Polyacrylamide (PAM) with added water was used to further reduce the oil content. The PAFC, PAC, and PSAFS were selected as coagulation–air flotation dynamic test alternative agents. The investment quantities of PAFC, PSAFS and PAM were 300 mg L⁻¹, 300 mg L⁻¹ and 30 mg L⁻¹, respectively. The stirring time was 5 min, the pH value was 6.5–6.9, the flow rate was 0.25 m³ h⁻¹, the oil content of the emulsified oil wastewater was 3000–5000 mg L⁻¹ and the effluent oil was stable below 15 ppm. The microbubble generation device using air flotation effluent was used in the two air flotation treatments to enhance the device efficiency. The air flotation device adopted the structural design of the upper part of the water inlet and the lower part of the micro-air bubble, which can increase the collision probability of the microbubble and improve the efficiency of oil removal.

Natural clay mineral and its modifier called modified clay have been used in many environmental applications for a number of years. However, they are not capable enough to achieve a higher conversion rate and so-called ecological sustainability. This can be due to a lack of understanding of the selectivity of the clay and its modifier or a lack of compatibility between clay and pollutants. Recently, the development and implementation of green principles into practice have become an emerging field that brings together green chemistry and engineering practices to achieve a pollutant-free environment (air, water, and soil). This review summarizes the role of clay/modified clay in pollution control and discusses the role of green chemistry in creating global sustainability. In this context, this review sheds light on the complete classification of the clay family to identify its properties and to critically examine the applicability of clay and modified clay for air, water, and soil pollution control over the past decade. This is the unique point of this review, showing how the properties of clay/modified clay can be useful for removing any type of pollutant without focusing on a single type of pollutant or clay. Furthermore, the importance of green materials in clay research, as well as the future area of application, was discussed. Overall, this review places value on multidisciplinary researchers to determine the role of the green pathway in the application of clay and modified clay in achieving environmental sustainability.

In this experiment, a variety of inorganic materials were simply compounded with Polysilicate Aluminum Ferric Sulfate (PSAFS) to treat emulsified oil-contaminated water. Manganese sulfate (MnSO₄), magnesium sulfate (MgSO₄), and zinc sulfate (ZnSO₄) were selected as the materials to modify PSAFS in order to obtain a coagulant with good flocculation performance. During the preparation of modified PSAFS, metal manganese, magnesium, and zinc were introduced for modification, and four factors were used to optimize the best proportion of modifiers and PSAFS. The results showed that the order of demulsification and oil-removal ability is as follows: Mn-PSAFS (Mn-modified PSAFS) > Zn-PSAFS (Zn-modified PSAFS) > Mg-PSAFS (Mg-modified PSAFS) > PSAFS. Modified PSAFS was characterized by infrared spectroscopy (IR) and a Scanning Electron Microscope (SEM). In the range of 604 cm⁻¹ to 1200 cm⁻¹, due to the complexation reaction between metal ions and polysilicic acid, the absorption peaks of the modified PSAFS and PSAFS were significantly different. SEM results revealed that the particles of the spatial network structure were fibrous and arranged more closely (0.5 mm × 50.0 mm) than others. This study provided that the modified PSAFS had good potential application in treating emulsified oily wastewater in the future.

The aim of this work was to develop bacterial communities to effectively degrade petroleum hydrocarbons (PHs). We investigated the biotic and abiotic contributors to differences in PHs degradation efficacy between two bacterial strains, Klebsiella pneumoniae (Kp) and Pseudomonas aeruginosa (Pa), screened out from the activated sludge of a petroleum refinery. We characterized the temporal variations in degradation efficacy for diesel and its five major constituents as a sole carbon source and identified more constituents they degraded. The growth characteristics, surface tension, hydrophobicity and emulsifiability of these two strains were measured. We further estimated the relationships between their degradation efficacy and all the biotic and abiotic factors. Results showed that the Pa strain had higher diesel degradation efficacy (58% on Day 14) and utilized more diesel constituents (86%) compared to Kp. Additionally, the growth of the Pa strain in diesel medium was faster than that of the Kp strain. The Pa strain had a lower surface tension and higher hydrophobicity and emulsifiability than Kp, while the surfactant produced by Pa was identified as rhamnolipids. Degradation of PHs was positively related to bacterial growth, hydrophobicity and emulsification but negatively related to surface tension. Overall, differences in degrading capacity for diesel constituents, relative growth rate, and biosurfactant production contributed to the variation in the PHs degradation efficacy of these two bacterial strains.