Mapping maize water stress status and monitoring its spatial variability at a farm scale are a prerequisite for precision irrigation. High-resolution multispectral images acquired from an unmanned aerial vehicle (UAV) were used to evaluate the applicability of the data in mapping water stress status of maize under different levels of deficit irrigation at the late vegetative, reproductive and maturation growth stages. Canopy temperature, field air temperature and relative humidity obtained by a handheld infrared thermometer and a portable air temperature/relative humidity meter were used to establish a crop water stress index (CWSI) empirical model under the weather conditions in Ordos, Inner Mongolia, China. Nine vegetation indices (VIs) related to crop water stress were derived from the UAV multispectral imagery and used to establish CWSI inversion models. The results showed that non-water-stressed baseline had significant difference in the reproductive and maturation stages with an increase of 2.1 °C, however, the non-transpiring baseline did not change significantly with an increase of 0.1 °C. The ratio of transformed chlorophyll absorption in reflectance index (TCARI) and renormalized difference vegetation index (RDVI), and the TCARI and soil-adjusted vegetation index (SAVI) had the best correlations with CWSI. R² values were 0.47 and 0.50 for TCARI/RDVI and TCARI/SAVI at the reproductive and maturation stages, respectively; and 0.81 and 0.80 for TCARI/RDVI and TCARI/SAVI at the late reproductive and maturation stages, respectively. Compared to CWSI calculated by on-site measurements, CWSI values retrieved by VI-CWSI regression models established in this study had more abilities to assess the field variability of crop and soil. This study demonstrates the potentiality of using high-resolution UAV multispectral imagery to map maize water stress.

To identify drought-tolerant crop cultivars or achieve a balance between water use and yield, accurate measurements of crop water stress are needed. In this study, the canopy temperature (Tc) of maize at the late vegetative stage was extracted from high-resolution red–green–blue (RGB, 1.25 cm) and thermal (7.8 cm) images taken by an unmanned aerial vehicle (UAV). To reduce the number of parameters for crop water stress monitoring, four simple methods that require only Tc were identified: Tc, degrees above non-stress, standard deviation of Tc, and variation coefficient of Tc. The ground-truth temperatures obtained using a handheld infrared thermometer were used to calibrate the temperature obtained from the UAV thermal images and to evaluate the Tc extraction results. Measured leaf stomatal conductance values were used to evaluate the performance of the four Tc-based crop water stress indicators. The results showed a strong correlation between ground-truth Tc and Tc extracted by the red–green ratio index (RGRI)-Otsu method proposed in this study, with a coefficient of determination of 0.94 (n = 15) and root mean square error value of 0.7°C. The RGRI-Otsu method was most accurate for estimating temperatures around 32.9°C, but the magnitude of residuals increased above and below this value. This phenomenon may be attributable to changes in canopy cover (leaf curling) under water stress, resulting in changes in the proportion of exposed sunlit soil in UAV thermal orthophotographs. Therefore, to improve the accuracy of maize canopy detection and extraction, optimal methods and better strategies for eliminating mixed pixels are needed. This study demonstrates the potential of using high-resolution UAV RGB images to supplement UAV thermal images for the accurate extraction of maize Tc.

The rapid, accurate, and economical estimation of crop above-ground biomass at the farm scale is crucial for precision agricultural management. The unmanned aerial vehicle (UAV) remote-sensing system has a great application potential with the ability to obtain remote-sensing imagery with high temporal-spatial resolution. To verify the application potential of consumer-grade UAV RGB imagery in estimating maize above-ground biomass, vegetation indices and plant height derived from UAV RGB imagery were adopted. To obtain a more accurate observation, plant height was directly derived from UAV RGB point clouds. To search the optimal estimation method, the estimation performances of the models based on vegetation indices alone, based on plant height alone, and based on both vegetation indices and plant height were compared. The results showed that plant height directly derived from UAV RGB point clouds had a high correlation with ground-truth data with an R² value of 0.90 and an RMSE value of 0.12 m. The above-ground biomass exponential regression models based on plant height alone had higher correlations for both fresh and dry above-ground biomass with R² values of 0.77 and 0.76, respectively, compared to the linear regression model (both R² values were 0.59). The vegetation indices derived from UAV RGB imagery had great potential to estimate maize above-ground biomass with R² values ranging from 0.63 to 0.73. When estimating the above-ground biomass of maize by using multivariable linear regression based on vegetation indices, a higher correlation was obtained with an R² value of 0.82. There was no significant improvement of the estimation performance when plant height derived from UAV RGB imagery was added into the multivariable linear regression model based on vegetation indices. When estimating crop above-ground biomass based on UAV RGB remote-sensing system alone, looking for optimized vegetation indices and establishing estimation models with high performance based on advanced algorithms (e.g., machine learning technology) may be a better way.

With the acceleration of agricultural intelligent transformation, deep reinforcement learning (DRL), leveraging its adaptive perception and decision-making capabilities in complex environments, has emerged as a pivotal technology in advancing the intelligent upgrade of agricultural machinery and equipment. For example, in UAV path optimization, DRL can help UAVs plan more efficient flight paths to cover more areas in less time. To enhance the systematicity and credibility of this review, this paper systematically examines the application status, key issues, and development trends of DRL in agricultural scenarios, based on the research literature from mainstream Chinese and English databases spanning from 2018 to 2024. From the perspective of algorithm–hardware synergy, the article provides an in-depth analysis of DRL’s specific applications in agricultural ground platform navigation, path planning for intelligent agricultural end-effectors, and autonomous operations of low-altitude unmanned aerial vehicles. It highlights the technical advantages of DRL by integrating typical experimental outcomes, such as improved path-tracking accuracy and optimized spraying coverage. Meanwhile, this paper identifies three major challenges facing DRL in agricultural contexts: the difficulty of dynamic path planning in unstructured environments, constraints imposed by edge computing resources on algorithmic real-time performance, and risks to policy reliability and safety under human–machine collaboration conditions. Looking forward, the DRL-driven smart transformation of agricultural machinery will focus on three key aspects: (1) The first aspect is developing a hybrid decision-making architecture based on model predictive control (MPC). This aims to enhance the strategic stability and decision-making interpretability of agricultural machinery (like unmanned tractors, harvesters, and drones) in complex and dynamic field environments. This is essential for ensuring the safe and reliable autonomous operation of machinery. (2) The second aspect is designing lightweight models that support edge-cloud collaborative deployment. This can meet the requirements of low-latency responses and low-power operation in edge computing scenarios during field operations, providing computational power for the real-time intelligent decision-making of machinery. (3) The third aspect is integrating meta-learning with self-supervised mechanisms. This helps improve the algorithm’s fast generalization ability across different crop types, climates, and geographical regions, ensuring the smart agricultural machinery system has broad adaptability and robustness and accelerating its application in various agricultural settings. This paper proposes research directions from three key dimensions-“algorithm capability enhancement, deployment architecture optimization, and generalization ability improvement”-offering theoretical references and practical pathways for the continuous evolution of intelligent agricultural equipment.

The rapid and accurate estimation of leaf chlorophyll content (LCC), an important indicator of crop photosynthetic capacity and nutritional status, is of great significance for precise nitrogen fertilization management. To explore the existence of a versatile regression model that can be successfully used to estimate the LCC for different varieties under different growth stages and nitrogen stress conditions, a study was conducted in 2023 across the growing season for winter wheat with five species and five nitrogen application levels. Two machine learning regression algorithms, support vector machine (SVM) and random forest (RF), were used to establish the bridge between UAV-derived multispectral vegetation indices and ground truth LCC (relative chlorophyll content, SPAD), taking the multivariate linear regression (MLR) algorithm as a reference. The results show that the visible atmospherically resistant index, vegetative index, and normalized difference vegetation index had the highest correlation with ground truth LCC, with a Pearson’s correlation coefficient of 0.95. All three regression algorithms (MLR, RF, and SVM) performed well on the training dataset (R²: 0.932–0.944, RMSE: 3.96 to 4.37), but performed differently on validation datasets with different growth stages, species, and nitrogen application levels. Compared to winter wheat species and nitrogen application levels, the growth stages had the greatest influence on the generalization ability of LCC estimation models, especially for the dough stage. At the dough stage, compared to MLR and RF, SVM performed best, with R² increasing by 0.27 and 0.10, respectively, and RMSE decreasing by 1.13 and 0.46, respectively. Overall, this study demonstrated that the combination of UAV-derived multispectral VIs and the SVM regression algorithm could be successfully applied to map the LCC of winter wheat for different species, growth stages, and nitrogen stress conditions. Ultimately, this research is significant as it shows the successful application of UAV data for mapping the LCC of winter wheat across diverse conditions, offering valuable insights for precision nitrogen fertilization management.

As prior information for precise nitrogen fertilization management, plant nitrogen content (PNC), which is obtained timely and accurately through a low-cost method, is of great significance for national grain security and sustainable social development. In this study, the potential of the low-cost unmanned aerial vehicle (UAV) RGB system was investigated for the rapid and accurate estimation of winter wheat PNC across the growing season. Specifically, texture features were utilized as complements to the commonly used spectral information. Five machine learning regression algorithms, including support vector machines (SVMs), classification and regression trees, artificial neural networks, K-nearest neighbors, and random forests, were employed to establish the bridge between UAV RGB image-derived features and ground-truth PNC, with multivariate linear regression serving as the reference. The results show that both spectral and texture features had significant correlations with ground-truth PNC, indicating the potential of low-cost UAV RGB images to estimate winter wheat PNC. The H channel, S4O6, and R_SE and R_EN had the highest correlation among the spectral indices, Gabor texture features, and grey level co-occurrence matrix texture features, with absolute Pearson’s correlation coefficient values of 0.63, 0.54, and 0.69, respectively. When the texture features were used together with spectral indices, the PNC estimation accuracy was enhanced, with the root mean square error (RMSE) decreasing from 2.56 to 2.24 g/kg, for instance, when using the SVM regression algorithm. The SVM regression algorithm with validation achieved the highest estimation accuracy, with a coefficient of determination (R²) of 0.62 and an RMSE of 2.15 g/kg based on the optimal feature combination of B_CON, B_M, G_DIS, H, NGBDI, R_EN, R_M, R_SE, S3O7, and VEG. Overall, this study demonstrated that the low-cost UAV RGB system could be successfully used to map the PNC of winter wheat across the growing season.