Run Wu

Run Wu


Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 January 2023 in Metals
Verified
Journal Article
Open access
PDF file
JFJunjie Fei
Junjie Fei
GZGuifeng Zhou
Guifeng Zhou
JZJianhua Zhou
Jianhua Zhou
XZXudong Zhou
Xudong Zhou
ZLZhao Li
Zhao Li
RWRun Wu
Run Wu
The damage mode of U75V rail steel in application is determined by its rolling wear behavior. In this paper, the pearlite microstructure of U75V steel is characterized to investigate the relationship between wear and fatigue behavior. The results show that, with decreasing of pearlite lamellar spacing, the wear resistance of the steel increases and the contact fatigue resistance decreases. The spacing decreasing causes the change of the wear mechanism from abrasive wear to adhesive wear, as well as the damage mode from wear damage to fatigue damage. The smaller the pearlite lamellar spacing is, the stronger the deformation of the cementite lamellar is. The thin cementite lamellar is hardly broken in the rolling friction to pile up a large number of dislocations in the ferrite matrix and the work hardening degree was improved. So, the plastic deformation layer is difficult to remove, and fatigue cracks are easy to initiate and extend to the interior of the material.

11 November 2019 in Transactions of the Indian Institute of Metals
Verified
Journal Article
Closed access
PDF file
WLWen Liang
Wen Liang
RWRun Wu
Run Wu
QYQing Yuan
Qing Yuan
JHJun Hu
Jun Hu

31 August 2019 in Metals
Verified
Journal Article
Open access
PDF file
TWTeng Wu
Teng Wu
RWRun Wu
Run Wu
BLBin Liu
Bin Liu
WLWen Liang
Wen Liang
DKDeqing Ke
Deqing Ke
The quenching and partitioning (Q&P) process of advanced high strength steels results in a significant enhancement in their strength and ductility. The development of controlled rolling and cooling technology provides an efficient tool for microstructural design in steels. This approach allows to control phase transformations in order to generate the desired microstructure in steel and, thus, to achieve the required properties. To refine grain structure in a Fe-Si-Mn-Nb steel and to generate the microstructure consisting of martensitic matrix with embedded retained austenite grains, hot rolling and pressing combined with ultrafast cooling and Q&P process is employed. The slender martensite in hot rolled Q&P steel improves the strength of test steel and the flake retained austenite improves the plasticity and work hardening ability through the Transformation Induced Plasticity (TRIP) effect.

22 March 2021 in Materials
Verified
Journal Article
Open access
PDF file
ZLZhao Li
Zhao Li
RWRun Wu
Run Wu
MLMingwei Li
Mingwei Li
SZSongsheng Zeng
Songsheng Zeng
YWYu Wang
Yu Wang
TWTeng Wu
Teng Wu
High boron steel is prone to brittle failure due to the boride distributed in it with net-like or fishbone morphology, which limit its applications. The Quenching and Partitioning (Q&P) heat treatment is a promising process to produce martensitic steel with excellent mechanical properties, especially high toughness by increasing the volume fraction of retained austensite (RA) in the martensitic matrix. In this work, the Q&P heat treatment is used to improve the inherent defect of insufficient toughness of high boron steel, and the effect mechanism of this process on microstructure transformation and the change of mechanical properties of the steel has also been investigated. The high boron steel as-casted is composed of martensite, retained austensite (RA) and eutectic borides. A proper quenching and partitioning heat treatment leads to a significant change of the microstructure and mechanical properties of the steel. The net-like and fishbone-like boride is partially broken and spheroidized. The volume fraction of RA increases from 10% in the as-cast condition to 19%, and its morphology also changes from blocky to film-like. Although the macro-hardness has slightly reduced, the toughness is significantly increased up to 7.5 J·cm−2, and the wear resistance is also improved.

2 October 2012 in International Journal of Minerals, Metallurgy and Materials
Verified
Journal Article
Closed access
PDF file
SLShu-Li Li
Shu-Li Li
RWRun Wu
Run Wu
YWYuan-Zheng Wei
Yuan-Zheng Wei
ZWZhi-Fang Wu
Zhi-Fang Wu
XZXue-Jun Zhou
Xue-Jun Zhou
GXGuang Xu
Guang Xu

20 January 2023 in Transactions of the Indian Institute of Metals
Verified
Journal Article
Closed access
PDF file
ZLZhao Li
Zhao Li
RWRun Wu
Run Wu
CXCheng Xu
Cheng Xu
YWYu Wang
Yu Wang
SZSongsheng Zeng
Songsheng Zeng
LCLei Chen
Lei Chen