A key requirement in 5G networks is the demand of minimizing transport delay. In this paper we propose and explore novel mechanisms for minimizing packet delay and delay variation in 5G mobile transport networks. Different from mechanisms described in the literature and standardization for deterministic delay aggregation, a novel method using a time window combined with a timeout-based approach is proposed. The goal is to achieve bounded delay aggregation of traffic suitable for application in fronthaul transport. We propose an asynchronous approach to deterministic networking, enabling bounded delay transmission (BDT). Exploration of parameters for controlling the maximum delay and packet delay variation (PDV) of the aggregated traffic is performed by simulation, and practical demonstration is shown in an experiment. Using the proposed mechanisms, we show that the delay and PDV can be bounded below 20 μs with up to 85%–90% carried load of the aggregated flows. Hence, we demonstrate their suitability for delay sensitive fronthaul transport and future applications in 5G networking. Experimental results demonstrate that the practical implementation of the mechanism is viable. Thus, it motivates the extensive analysis performed through simulations.
Seismic imaging is essential for detailed characterization and understanding of the subsurface. Traditionally, marine seismic data have been acquired either using towed streamers or ocean-bottom receivers. Distributed acoustic sensing (DAS) is a novel and fast-emerging technology that makes it possible to use fiber-optic cables for acoustic measurements. The technology turns the fiber-optic cable into a densely sampled receiver array. A controlled source experiment comparing DAS and conventional towed streamer data for seismic imaging purposes is described. An existing 130 km telecommunication fiber-optic cable was interrogated to acquire DAS data to analyze the signal at long distances and for subsurface imaging. A seismic source vessel was used to create seismic data along the full cable length, while at the same time acquiring conventional towed streamer data for comparison. In addition, the telecommunication fiber-optic cable was used to acquire passive DAS data. The results show that seismic signals in the telecommunication fiber-optic cable are detectable at distances above 100 km from the source point. Furthermore, comparisons of the DAS data and towed streamer data show that the DAS technology allows for the acquisition of large offset seismic data that are comparable with conventional seismic data. Analysis of the passive DAS data shows that the infragravity waves correlate with the observed weather conditions during the acquisition.
Distributed acoustic sensing (DAS) can be deployed on existing submarine fiber-optic cables to add long-range sensor capability to the cable infrastructure. In this article, we present the following: (1) observations and analysis of impulsive source events from long-term DAS measurements on a North Sea submarine telecommunications cable. The observations include local earthquakes originating in the crust below the cable, underwater explosions originating in the water column, an onshore explosion from the nearby coast, and examples of sonic booms from supersonic aircraft and a suspected meteor from the atmosphere. The analysis reveals how the signals from earthquakes and underwater/aerial explosions can be distinguished in the data domain based on their frequency and apparent velocity characteristics. (2) A processing workflow enabling real-time marine surveillance including detection and location of explosions in the water column. The processing is verified by corroborating local earthquakes and underwater explosions with independent data sources. We show that different types of waves can be identified including seismic body waves, hydroacoustic waves, and atmospheric infrasound waves coupled through the water column. Tracking the travel-time moveout along the nonstraight cable route allows for positioning of the source, which we demonstrate by migration stacking of the recorded signal. Signal processing suitable for real-time classification and source location is applied to the recorded data and shows how ocean space surveillance at scale can be realized.
Future network should be able to efficiently serve packet-based networks, such as the Internet. In this paper, based on results from COST 266, we explore characteristics of optical burst switching (OBS) and optical packet switching (OPS). Both node design and metropolitan area network (MAN) are discussed. A unique joint comparative performance evaluation of contention resolution in OBS and OPS are presented, as well as methods of quality of service (QoS) differentiation in OBS/OPS networks, and their performance.
We report the first observation, to our knowledge, of an earthquake using state-of-polarization (SOP) monitoring on an aerial access network fiber cable containing both single- and multi-core fiber, enabling direct comparison under identical deployment. SOP variations correlate with seismic records and estimated P- and S-wave arrivals. Ground motion excites the pole-cable mechanical system, amplifying aerial cable displacement and producing frequency-selective SOP responses. The single-core fiber response is dominated by a primary structural resonance, whereas the multicore fiber exhibits additional low-frequency harmonics, likely due to higher sensitivity to bending-induced strain. These results demonstrate the potential of dense terrestrial fiber networks for low-cost polarization-based seismic monitoring.