Michele Notarnicola

Prof. Michele Notarnicola

Department of Civil, Environmental, Land, Building Engineering and Chemistry, Polytechnic University of Bari, via E. Orabona, 4, 70125 Bari, Italy

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 May 2020 in Coatings
Verified
Journal Article
Open access
PDF file
Rosa Di MundoRosa Di Mundo
Rosa Di Mundo
Claudia LabiancaClaudia Labianca
Claudia Labianca
Giuseppe CarboneGiuseppe Carbone
Giuseppe Carbone
Michele NotarnicolaMichele Notarnicola
Michele Notarnicola
In this review, we present a survey on hydrophobic surface treatments of concrete, important protection tools against deterioration and corrosion phenomena. In the frame of a standardized distinction in coatings, pore blockage, and impregnation methods, we highlight the huge variety of compounds and formulations utilized, and the different performances reached in terms of water contact angle, water absorption, chloride penetration, and, rarely reported, anti-icing/icephobic action. Our view covers the spectrum of the surface treatments, but also makes a comparison with hydrophobic bulk modifications of concrete, procedures often utilized as well; further, novel proposals of more sustainable routes are presented. We note that coating and impregnation, preferably when based on polyurethane and silane/siloxane, respectively, appear more effective against water ingress. The achieved wetting character is hydrophobic or, at most, overhydrophobic. Superhydrophobic coatings for concrete have been obtained by embedding nano-powders in hydrophobic emulsions, allowing to add a nanotexture to the preexisting complex roughness of the material. Concrete treated with this type of coating has also recently shown a pronounced icephobic character, a parameter that goes beyond the freeze–thaw characterization usually conducted on cement-based materials.

9 August 2021 in Sustainability
Verified
Journal Article
Open access
PDF file
SVStelladriana Volpe
Stelladriana Volpe
Valentino SangiorgioValentino Sangiorgio
Valentino Sangiorgio
Andrea PetrellaAndrea Petrella
Andrea Petrella
ACArmando Coppola
Armando Coppola
Michele NotarnicolaMichele Notarnicola
Michele Notarnicola
FFFrancesco Fiorito
Francesco Fiorito
The Fourth Industrial Revolution represents the beginning of a profound change for the building sector. In the last decade, the perspective of shapes, materials, and construction techniques is evolving fast due to the additive manufacturing technology. On the other hand, even if the technology is growing fast and several 3D printed buildings are being developed worldwide, the potential of concrete 3D printing in building prefabrication remains unexplored. Consequently, the application of new digital fabrication technologies in the construction industry requires a redesign of the construction process and its components. This paper proposes a novel conception, design, and prototyping of a precast building envelope to be prefabricated with extrusion-based 3D concrete printing (3DCP). The new design and conception aim to fully exploit the potential of 3D printing for prefabricated components, especially in terms of dry assembly, speed of implementation, reusability, recyclability, modularity, versatility, adaptability, and sustainability. Beyond the novel conceptual design of precast elements, the research investigated the 3D printable cementitious material based on a magnesium potassium phosphate cement (MKPC), which was devised and tested to ensure good performances of the proposed component. Finally, a prototype has been realised in scale with additive manufacturing technology in order to verify the printability and to optimize the extruder path. This study leads us to believe that the combined use of prefabricated systems, construction automation, and innovative materials can decisively improve the construction industry’s sustainability in the future.

22 February 2020 in Materials
Verified
Journal Article
Open access
PDF file
Andrea PetrellaAndrea Petrella
Andrea Petrella
Rosa Di MundoRosa Di Mundo
Rosa Di Mundo
Michele NotarnicolaMichele Notarnicola
Michele Notarnicola
In the present work the rheological, thermo-mechanical, microstructural, and wetting characteristics of cement mortars with recycled expanded polystyrene (EPS) were analyzed. The samples were prepared after partial/total replacement of the conventional sand aggregate with EPS having different grain size and size distribution. Lightness and thermal insulation were relevant features for all the bare EPS composites, despite the mechanical strengths. Specifically, EPS based mortars were characterized by higher thermal insulation with respect to the sand reference due to the lower specific mass of the specimens mainly associated with the low density of the aggregates and also to the spaces at the EPS/cement paste interfaces. Interesting results in terms of low thermal conductivity and high mechanical resistances were obtained in the case of sand-EPS mixtures although characterized by only 50% in volume of the organic aggregate. Moreover, sand-based mortars showed hydrophilicity (low WCA) and high water penetration, whereas the presence of EPS in the cement composites led to a reduction of the absorption of water especially on the bulk of the composites. Specifically, mortars with EPS in the 2–4 mm and 4–6 mm bead size range showed the best results in term of hydrophobicity (high WCA) and no water penetration in the inner surface, due to low surface energy of the organic aggregate together with a good particle distribution. This was indicative of cohesion between the ligand and the polystyrene as observed in the microstructural detections. Such a property is likely to be correlated to the observed good workability of this type of mortar and to its low tendency to segregation compared to the other EPS containing specimens. These lightweight thermo-insulating composites can be considered environmentally sustainable materials because they are prepared with no pre-treated secondary raw materials and can be used for indoor applications.

7 April 2022 in Materials
Verified
Journal Article
Open access
PDF file
Luigi CoppolaLuigi Coppola
Luigi Coppola
SBSilvia Beretta
Silvia Beretta
Maria Chiara BignozziMaria Chiara Bignozzi
Maria Chiara Bignozzi
FBFabio Bolzoni
Fabio Bolzoni
Andrea BrennaAndrea Brenna
Andrea Brenna
Francesco TodaroFrancesco Todaro
Francesco Todaro
The topic of sustainability of reinforced concrete structures is strictly related with their durability in aggressive environments. In particular, at equal environmental impact, the higher the durability of construction materials, the higher the sustainability. The present review deals with the possible strategies aimed at producing sustainable and durable reinforced concrete structures in different environments. It focuses on the design methodologies as well as the use of unconventional corrosion-resistant reinforcements, alternative binders to Portland cement, and innovative or traditional solutions for reinforced concrete protection and prevention against rebars corrosion such as corrosion inhibitors, coatings, self-healing techniques, and waterproofing aggregates. Analysis of the scientific literature highlights that there is no preferential way for the production of “green” concrete but that the sustainability of the building materials can only be achieved by implementing simultaneous multiple strategies aimed at reducing environmental impact and improving both durability and performances.

22 June 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Claudia LabiancaClaudia Labianca
Claudia Labianca
Sabino De GisiSabino De Gisi
Sabino De Gisi
FPFrancesco Picardi
Francesco Picardi
Francesco TodaroFrancesco Todaro
Francesco Todaro
Michele NotarnicolaMichele Notarnicola
Michele Notarnicola
Spills, leaks, and other environmental aspects associated with petroleum products cause hazards to human health and ecosystems. Chemicals involved are total petroleum hydrocarbons (TPH), polycyclic aromatic hydrocarbons (PAHs), solvents, pesticides, and other heavy metals. Soil vapor extraction (SVE) is one of the main in-situ technologies currently employed for the remediation of groundwater and vadose zone contaminated with volatile organic compounds (VOCs). The performance of an SVE remediation system was examined for a petroleum hydrocarbon-contaminated site with attention to remediation targets and final performance. The study assessed: (1) the efficiency of a full-scale remediation system and (2) the influence of parameters affecting the treatment system effectiveness. Results showed how VOC concentration in soil was highly reduced after four year treatment with a global effectiveness of 73%. Some soil samples did not reach the environmental threshold limits and, therefore, an extension of the remediation period was required. The soil texture, humidity, permeability, and the category of considered pollutants were found to influence the amount of total extracted VOCs.

8 October 2024 in Recycling
Verified
Journal Article
Open access
PDF file
GSGiusy Santomasi
Giusy Santomasi
Francesco TodaroFrancesco Todaro
Francesco Todaro
Andrea PetrellaAndrea Petrella
Andrea Petrella
Michele NotarnicolaMichele Notarnicola
Michele Notarnicola
Eggo Thoden van VelzenEggo Thoden van Velzen
Eggo Thoden van Velzen
The recycling of PET trays is highly challenging. The aim of this paper was to investigate the issues related to the mechanical recycling process and, the correlation between feedstock composition and the quality of the produced rPET. Four feedstocks with different degrees of impurity were mechanically recycled at a laboratory pilot scale. The optical and thermal properties of the rPET products were examined to determine the quality and to seek relations with the starting level of impurities. The final products of the PET trays’ mechanical recycling were found to be affected by the presence of impurities (organics) and multi-material (non-PET) elements in the feedstocks. The rPET products crystallised faster for contaminated feedstocks showed lower molecular mass and higher yellow index values due to thermal degradation. Yellowing is a crucial parameter in assessing the thermal degradation of rPET. Injection moulded samples corresponding to higher contamination levels, reported values of Yellow Index equal to 179 and 177 compared to 15 of mono-PET sample. The intrinsic viscosity decreased from 0.60 dL/g to just above 0.30 dL/g, and losses were more significant for soiled or multi-material feedstocks. A method of improving the final quality would involve the purification of the starting feedstock from impurities.