This review presents “a state of the art” report on sustainability in construction materials. The authors propose different solutions to make the concrete industry more environmentally friendly in order to reduce greenhouse gases emissions and consumption of non-renewable resources. Part 1—the present paper—focuses on the use of binders alternative to Portland cement, including sulfoaluminate cements, alkali-activated materials, and geopolymers. Part 2 will be dedicated to traditional Portland-free binders and waste management and recycling in mortar and concrete production.

The topic of sustainability of reinforced concrete structures is strictly related with their durability in aggressive environments. In particular, at equal environmental impact, the higher the durability of construction materials, the higher the sustainability. The present review deals with the possible strategies aimed at producing sustainable and durable reinforced concrete structures in different environments. It focuses on the design methodologies as well as the use of unconventional corrosion-resistant reinforcements, alternative binders to Portland cement, and innovative or traditional solutions for reinforced concrete protection and prevention against rebars corrosion such as corrosion inhibitors, coatings, self-healing techniques, and waterproofing aggregates. Analysis of the scientific literature highlights that there is no preferential way for the production of “green” concrete but that the sustainability of the building materials can only be achieved by implementing simultaneous multiple strategies aimed at reducing environmental impact and improving both durability and performances.

Spills, leaks, and other environmental aspects associated with petroleum products cause hazards to human health and ecosystems. Chemicals involved are total petroleum hydrocarbons (TPH), polycyclic aromatic hydrocarbons (PAHs), solvents, pesticides, and other heavy metals. Soil vapor extraction (SVE) is one of the main in-situ technologies currently employed for the remediation of groundwater and vadose zone contaminated with volatile organic compounds (VOCs). The performance of an SVE remediation system was examined for a petroleum hydrocarbon-contaminated site with attention to remediation targets and final performance. The study assessed: (1) the efficiency of a full-scale remediation system and (2) the influence of parameters affecting the treatment system effectiveness. Results showed how VOC concentration in soil was highly reduced after four year treatment with a global effectiveness of 73%. Some soil samples did not reach the environmental threshold limits and, therefore, an extension of the remediation period was required. The soil texture, humidity, permeability, and the category of considered pollutants were found to influence the amount of total extracted VOCs.

The paper represents the “state of the art” on sustainability in construction materials. In Part 1 of the paper, issues related to production, microstructures, chemical nature, engineering properties, and durability of mixtures based on binders alternative to Portland cement were presented. This second part of the paper concerns the use of traditional and innovative Portland-free lime-based mortars in the conservation of cultural heritage, and the recycling and management of wastes to reduce consumption of natural resources in the production of construction materials. The latter is one of the main concerns in terms of sustainability since nowadays more than 75% of wastes are disposed of in landfills.