Chenchen Wang

Chenchen Wang


Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 May 2018 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
ZZZisui Zhang
Zisui Zhang
CWChenchen Wang
Chenchen Wang
MZMinglei Zhou
Minglei Zhou
XYXiaojie You
Xiaojie You
Voltage angle control not only can solve the problem that two current regulators of traditional algorithms conflict with each other, but also has the advantage of maximum utilization of the dc-link voltage. Based on the basic equations of permanent-magnet synchronous motors (PMSM) in id-iq coordinate plane, the principle of voltage angle control is analyzed and a single q-axis current regulator-variable voltage angle (SQCR-VVA) control method is proposed as the novel approach for the flux weakening operation of PMSM over a wide range of speed in motoring and generating mode. The proposed method enables fast dynamic response of current when current reference changes and eliminates the transition between motoring and generating operation. The results of simulation and experiment demonstrate the effectiveness of the proposed control method.

30 November 2021 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
CWChenchen Wang
Chenchen Wang
LGLifeng Gou
Lifeng Gou
SDShifan Dong
Shifan Dong
MZMinglei Zhou
Minglei Zhou
XYXiaojie You
Xiaojie You
In this article, a super-twisting algorithm-based sliding mode observer (STA-SMO) with a complex vector generalized integrator (CVGI) for sensorless control of an interior permanent magnet synchronous motor (IPMSM) is proposed. The STA-SMO exists the compromise between chattering and estimation accuracy under limited control frequency in practice. In order to solve this problem, a CVGI is introduced to guarantee the accuracy of the back electromotive force (EMF) estimation while alleviating chattering. The proposed STA-SMO with CVGI can be used not only in the normal operation but also in the flying start operation based on virtual resistance. The accuracy of the estimated rotor position is not influenced by the value of the virtual resistance during flying start. Furthermore, the proposed STA-SMO with CVGI is designed based on the discrete model of the IPMSM in the discrete-time domain. The stability of the proposed method in the discrete-time domain is further analyzed. Finally, the effectiveness of proposed method is verified by experiments.

12 September 2022 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
JJJian Jiao
Jian Jiao
XGXizheng Guo
Xizheng Guo
CWChenchen Wang
Chenchen Wang
XYXiaojie You
Xiaojie You
LLC -DC transformers ( LLC -DCXs) operate under fixed-frequency and open-loop conditions to achieve high efficiency and are promising converters that can be used in the auxiliary power units (APUs) of electric locomotives. An optimal design method of LLC -DCXs is proposed in this paper. First, the time-domain expressions of the symmetric half-bridge LLC resonant converter with split resonant capacitors are derived. A current increment method is proposed to determine the expressions. Second, the discontinuous conduction mode (DCM) and voltage gain limiting conditions are used to obtain the magnetizing inductance ranges. The converter losses and zero-voltage-switching (ZVS) ranges are considered to determine the final magnetizing inductance. A 10 kW prototype is used as an example, and a detailed parameter design process is implemented. Compared with conventional design methods for the magnetizing inductance, the proposed method can effectively determine the maximum magnetizing inductance for the DCM operation of the converter. The effectiveness of the proposed method is proven by the simulations and experimental results obtained for the 10 kW LLC -DCX prototype. The maximum efficiency of the designed converter is 98.12% under the full load.

13 April 2020 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
ZZZisui Zhang
Zisui Zhang
CWChenchen Wang
Chenchen Wang
MZMinglei Zhou
Minglei Zhou
XYXiaojie You
Xiaojie You
This paper proposes a dual-parameters compensation control method to improve the torque accuracy of permanent magnet synchronous motor~(PMSM) in flux-weakening region for rail transit. For the sake of the feature that six-step operation is the essential operation of rail transit and switching frequency is very low, the proposed method works on the single q-axis current regulator-variable voltage angle~(SQCR-VVA) flux-weakening control strategy of PMSM. Based on SQCR-VVA flux-weakening control, impact of inaccurate parameters is analysed in seven different conditions, and inaccurate parameters (d-axis inductance, q-axis inductance and permanent magnet flux linkage) result in the errors on d-axis current response and d-axis feed forward voltage. In order to eliminate the impact of the three parameters at the same time, two compensation regulators are applied to the proposed method. Error of q-axis inductance is identified by the d-axis voltage regulator. Impact of d-axis inductance and permanent magnet flux linkage is eliminated by the d-axis current regulator. The proposed method is subsequently tested on PMSM and shows quite good performance on the improvement of torque accuracy.

6 August 2019 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
LGLifeng Gou
Lifeng Gou
CWChenchen Wang
Chenchen Wang
MZMinglei Zhou
Minglei Zhou
XYXiaojie You
Xiaojie You
Starting in the rotating condition is an important technology for induction motor (IM) speed sensorless control. The key of this technology is that the initial speed of the IM in the rotating condition should be estimated quickly and accurately. In this paper, an integral sliding mode (ISM) control method based on the nonlinear model of the rotor back electromotive force (back-EMF) is designed to start a speed sensorless controlled IM in the rotating condition. The stability is guaranteed by Lyapunov stability analysis, and the robustness to rotor time constant and disturbance are analyzed. Meanwhile, in comparison with the proposed control method, the existing input-output feedback linearization (IOFL) control method is introduced and the stability and robustness are also analyzed. Compared with the existing IOFL control method, the proposed control method can estimate the initial speed in the rotating condition without overshoot and has better dynamic performance and robustness. In addition, the proposed control method can be applied not only to the restart operation but also to the normal operation. Only a single control strategy is required from the restart operation to the normal operation. The proposed method is verified by simulation and experiments using a 7.5kW induction motor.

7 August 2020 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
ZDZhiqiang Dong
Zhiqiang Dong
CWChenchen Wang
Chenchen Wang
KCKai Cui
Kai Cui
Qian ChengQian Cheng
Qian Cheng
JWJian Wang
Jian Wang
In this paper, the mechanism of neutral point potential oscillations of neutral point clamped 3-level inverter fed dual three-phase ac motors is described. In a dual three-phase ac motor drive system, the 3-level NPC inverter can be controlled as one six-phase system or two separate conventional three-phase systems. Therefore, this paper extends the traditional control strategy which injects the uniform zero-sequence voltage into the three-phase system to the six-phase system. The relationship of the uniform zero-sequence voltage and the neutral current is analyzed in detail. Meanwhile, the NP potential balancing strategy adopting dual zero-sequence voltages is presented in this paper. The simulation and experiment verify that the proposed strategy adopting dual zero-sequence voltages have better control of the neutral point potential than the strategy adopting uniform zero-sequence voltage.