Ruan Carlos de Araújo Moura

Prof. Dr. Ruan Carlos de Araújo Moura

orcid

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 June 2012 in International Journal of Chemical Engineering
Verified
Journal Article
Open access
PDF file
RMRuan Carlos de Araújo Moura
Ruan Carlos de Araújo Moura
D. A. BertuolD. A. Bertuol
D. A. Bertuol
CFCarlos Arthur Ferreira
Carlos Arthur Ferreira
FAFranco D. R. Amado
Franco D. R. Amado
The metal-finishing and tannery industries have been under strong pressure to replace their current wastewater treatment based on a physicochemical process. The electrodialysis process is becoming an interesting alternative for wastewater treatment. Electrodialysis is a membrane separation technique, in which ions are transported from one solution to another through ion-exchange membranes, using an electric field as the driving force. Blends of polystyrene and polyaniline were obtained in order to produce membranes for electrodialysis. The produced membranes were applied in the recovery of baths from the metal-finishing and tannery industries. The parameter for electrodialysis evaluation was the percentage of chromium extraction. The results obtained using these membranes were compared to those obtained with the commercial membrane Nafion 450.

12 April 2024 in Buildings
Verified
Journal Article
Open access
PDF file
JJJairon Gomes da Silveira Júnior
Jairon Gomes da Silveira Júnior
KCKevin de Moura Cerqueira
Kevin de Moura Cerqueira
RMRuan Carlos de Araújo Moura
Ruan Carlos de Araújo Moura
PMPaulo Ricardo de Matos
Paulo Ricardo de Matos
ERErich Rodriguez
Erich Rodriguez
Marcelo Tramontin SouzaMarcelo Tramontin Souza
Marcelo Tramontin Souza
This study provides novel insights into the nuanced impact of time gaps on the buildability of cement mixtures within the 3D printing process. In contrast to studies predominantly focused on rheological properties, this research addresses essential factors such as printed structure size, which inevitably affect the temporal intervals between layer depositions and consequently shape the buildability outcome. The investigation encompasses cement mixtures with diverse water-to-cement ratios (ranging from 0.26 to 0.36), varied setting accelerator concentrations (1.0 to 2.0 wt.%), and superplasticizer contents (0.25 and 0.5 wt.%), all explored across different time gaps (ranging from 5 to 25 min). The evaluation of buildability involves a meticulous assessment of the deformation of the bottom layer induced by adjacent layers. The findings underscore the substantial role played by chemical admixtures in fine-tuning rheological properties specific to each time gap, thereby influencing the size of the printed structure. The impact of the accelerator admixture is evident in its ability to reduce the minimum time gap required for optimal buildability while the superplasticizer emerges as a key player in enhancing fluidity without compromising the load-bearing capacity of the printed structures. To predict buildability for a given time gap, the study leverages the results of spreading diameter from the flow table test and the setting time from the Vicat test. Lastly, this study extends its scope to unveil insights into the intricate interplay between time gap and printing speed for 3D printed real-scale constructions by examining the relationship among these parameters across constructions with diverse built areas.

1 December 2015 in Ambiente Construído
Verified
Journal Article
Open access
PDF file
RSRebeca Bastos Silva
Rebeca Bastos Silva
CFCintia Maria Ariani Fontes
Cintia Maria Ariani Fontes
PLPaulo Lima
Paulo Lima
Otávio da Fonseca Martins GomesOtávio da Fonseca Martins Gomes
Otávio da Fonseca Martins Gomes
LLLilian Graicy Lima Morais Lima
Lilian Graicy Lima Morais Lima
RFRomildo Dias Toledo Filho
Romildo Dias Toledo Filho
Cinza de biomassa é um resíduo sólido gerado em grande quantidade em caldeiras para produção de energia e calor. Na indústria de processamento de cacau, que usa casca de amêndoa de cacau (20%) e madeira de eucalipto (80%) como combustível, são geradas cinzas volantes e cinzas de fundo, cujas propriedades são pouco conhecidas, o que limita sua correta disposição ou aplicação. Neste trabalho, cinza fornalha (fundo) e ciclone (volante) foram coletadas, durante o processo de limpeza da caldeira, e caracterizadas quanto a composição química, morfologia (MEV), granulometria e mineralogia (DR-X) com o objetivo de avaliar a potencialidade das cinzas para uso como adição mineral. As cinzas foram beneficiadas com moagem e queima controlada a 500, 700 e 900º C. Para avaliação do efeito da cinza, foram moldadas quatro argamassas com 5% de substituição de cimento por cinza ciclone e cinza fornalha, in natura e moídas. Os resultados dos testes de absorção de água e resistência mecânica (compressão e tração na flexão) demonstraram um aumento da absorção e da porosidade para todas as misturas, mas a manutenção das propriedades mecânicas para mistura com cinza ciclone moída, quando comparada com a argamassa sem adição, demonstrando a potencialidade desta cinza como adição mineral.

23 August 2022 in Polymers
Verified
Journal Article
Open access
PDF file
RMRuan Carlos de Araújo Moura
Ruan Carlos de Araújo Moura
PLPaulo Lima
Paulo Lima
Daniel Véras RibeiroDaniel Véras Ribeiro
Daniel Véras Ribeiro
Glass fiber reinforced polymer (GFRP) bars have been increasingly used as reinforcement in concrete structures. However, when the bars are exposed to high temperatures, there is a change in the internal structure of the polymer which affects the tensile strength of the matrix and its adhesion with the fibers, reducing the mechanical strength of the bar. In addition, with increasing temperature, the bar-concrete interface is also damaged by the decomposition of hydration products from the cement paste and the loss of surface adhesion. The intensity of these changes is associated with the type of resin used as a matrix since each polymer has its own molecular structure that provides a greater or lesser ability to resist the changes imposed by temperature. The present study evaluates the mechanical behavior of reinforced concrete containing different types of GFRP bars and subjected to temperatures of 150 °C, 300 °C, and 350 °C. The GFRP bars with three types of matrices (polyester, vinyl ester, or epoxy) were mechanically evaluated under tension in two conditions: isolated and inserted into reinforced concrete specimens with a thickness of 20 mm, using two types of concrete (with and without silica fume). Degradation mechanisms at the bar/concrete interface were evaluated using thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), differential thermal analysis (DTA), and bond techniques. The results showed that the type of matrix has a significant influence on the tensile behavior of GFRP bars, with the epoxy matrix showing the best performance, followed by bars with vinyl ester and polyester matrix resins. The use of silica fume improved the performance of the concrete coating and, consequently, improved the protection of GFRP bars, hindering the diffusion of oxygen and heat; bar/concrete adhesion was compromised by thermal degradation of GFRP bar ribs.

1 January 2021 in Materials Research
Verified
Journal Article
Open access
RMRuan Carlos de Araújo Moura
Ruan Carlos de Araújo Moura
Daniel Véras RibeiroDaniel Véras Ribeiro
Daniel Véras Ribeiro
PLPaulo Lima
Paulo Lima

24 April 2015 in Journal of the Brazilian Society of Mechanical Sciences and Engineering
Verified
Journal Article
Closed access
PDF file
AOAdélcio Carlos de Oliveira
Adélcio Carlos de Oliveira
FAFranco D. R. Amado
Franco D. R. Amado
RMRuan Carlos de Araújo Moura
Ruan Carlos de Araújo Moura