Above-ground biomass (AGB) is a basic agronomic parameter for field investigation and is frequently used to indicate crop growth status, the effects of agricultural management practices, and the ability to sequester carbon above and below ground. The conventional way to obtain AGB is to use destructive sampling methods that require manual harvesting of crops, weighing, and recording, which makes large-area, long-term measurements challenging and time consuming. However, with the diversity of platforms and sensors and the improvements in spatial and spectral resolution, remote sensing is now regarded as the best technical means for monitoring and estimating AGB over large areas. In this study, we used structural and spectral information provided by remote sensing from an unmanned aerial vehicle (UAV) in combination with machine learning to estimate maize biomass. Of the 14 predictor variables, six were selected to create a model by using a recursive feature elimination algorithm. Four machine-learning regression algorithms (multiple linear regression, support vector machine, artificial neural network, and random forest) were evaluated and compared to create a suitable model, following which we tested whether the two sampling methods influence the training model. To estimate the AGB of maize, we propose an improved method for extracting plant height from UAV images and a volumetric indicator (i.e., BIOVP). The results show that (1) the random forest model gave the most balanced results, with low error and a high ratio of the explained variance for both the training set and the test set. (2) BIOVP can retain the largest strength effect on the AGB estimate in four different machine learning models by using importance analysis of predictors. (3) Comparing the plant heights calculated by the three methods with manual ground-based measurements shows that the proposed method increased the ratio of the explained variance and reduced errors. These results lead us to conclude that the combination of machine learning with UAV remote sensing is a promising alternative for estimating AGB. This work suggests that structural and spectral information can be considered simultaneously rather than separately when estimating biophysical crop parameters.

Estimates of crop canopy chlorophyll content (CCC) can be used to monitor vegetation productivity, manage crop resources, and control disease and pests. However, making these estimates using conventional ground-based methods is time-consuming and resource-intensive when deployed over large areas. Although vegetation indices (VIs), derived from satellite sensor data, have been used to estimate CCC, they suffer from problems related to spectral saturation, soil background, and canopy structure. A new method was, therefore, proposed for combining the Medium Resolution Imaging Spectrometer (MERIS) terrestrial chlorophyll index (MTCI) and LAI-related vegetation indices (LAI-VIs) to increase the accuracy of CCC estimates for wheat and soybeans. The PROSAIL-D canopy reflectance model was used to simulate canopy spectra that were resampled to match the spectral response functions of the MERIS carried on the ENVISAT satellite. Combinations of the MTCI and LAI-VIs were then used to estimate CCC via univariate linear regression, binary linear regression and random forest regression. The accuracy using the field spectra and MERIS data was determined based on field CCC measurements. All the MTCI and LAI-VI combinations for the selected regression techniques resulted in more accurate estimates of CCC than the use of the MTCI alone (field spectra data for soybeans and wheat: R² = 0.62 and RMSE = 77.10 μg cm⁻²; MERIS satellite data for soybeans: R² = 0.24 and RMSE = 136.54 μg cm⁻²). The random forest regression resulted in better accuracy than the other two linear regression models. The combination resulting in the best accuracy was the MTCI and MTVI2 and random forest regression, with R² = 0.65 and RMSE = 37.76 μg cm⁻² (field spectra data) and R² = 0.78 and RMSE = 47.96 μg cm⁻² (MERIS satellite data). Combining the MTCI and a LAI-VI represents a further step towards improving the accuracy of estimation CCC based on multispectral satellite sensor data.

As a type of earth observation technology, interferometric synthetic aperture radar (InSAR) is increasingly widely used in the field of geological disaster detection. However, the application of InSAR in low-coherence areas, such as alpine canyon areas and vegetation coverage areas, is subject to considerable limitations. How to accurately identify landslides from InSAR measurement data in these areas remains the subject of several challenges and shortcomings. Based on statistical analysis and spatial cluster analysis, in this paper, we propose an automatic landslide identification and gradation method suitable for low-coherence areas. The proposed method combines the small baseline subset InSAR (SBAS-InSAR) method and the interferogram stacking (stacking-InSAR) method to obtain a deformation map in the study area, using statistical analysis and spatial cluster analysis to extract deformation regions and landslide polygons to propose a landslide screening model (LSM) based on multivariate features to screen landslides and reduce the interference of noise in landslide identification, in addition to proposing a landslide gradation model (LGM) based on signum function to grade the identified landslides and provide support to distinguish landslides with different deformation degrees. The method was applied to landslide identification in the upper section of the Jinsha River basin, and 47 potential landslides were identified, including 15 high-risk landslides and 13 landslides endangering villages. The experimental results show that the proposed method can identify landslides accurately and hierarchically in low-coherence areas, providing support for geological hazard investigation agencies and local departments.

As an important power facility for transmission corridors, automatic three-dimensional (3D) reconstruction of the pylon plays an important role in the development of smart grid. In this study, a novel three-dimensional reconstruction method using airborne LiDAR (Light Detection And Ranging) point cloud is developed and tested. First, a principal component analysis (PCA) algorithm is performed for pylon redirection based on the structural feature of the upper part of a pylon. Then, based on the structural similarity of a pylon, a pylon is divided into three parts that are inverted triangular pyramid lower structures, quadrangular frustum pyramid middle structures, and complex upper or lateral structures. The reconstruction of the inverted triangular pyramid structures and quadrangular frustum pyramid structures is based on prior knowledge and a data-driven strategy, where the 2D alpha shape algorithm is used to obtain contour points and 2D linear fitting is carried out based on the random sample consensus (RANSAC) method. Complex structures’ reconstruction is based on the priori abstract template structure and a data-driven strategy, where the abstract template structure is used to determine the topological relationship among corner points and the image processing method is used to extract corner points of the abstract template structure. The main advantages in the proposed method include: (1) Improving the accuracy of the pylon decomposition method through introducing a new feature to identify segmentation positions; (2) performing the internal structure of quadrangular frustum pyramids reconstruction; (3) establishing the abstract template structure and using image processing methods to improve computational efficiency of pylon reconstruction. Eight types of pylons are tested in this study, and the average error of pylon reconstruction is 0.32 m and the average of computational time is 0.8 s. These results provide evidence that the pylon reconstruction method developed in this study has high accuracy, efficiency, and applicability.

Dynamic predictions of surface subsidence are crucial for assessing ground damage and protecting surface buildings. Based on Small Baseline Subset Interferometric Synthetic Aperture Radar (SBAS-InSAR) technology, a method for making dynamic predictions of large-scale surface subsidence in mining areas can be established; however, the problem of phase coherence loss in InSAR data makes it impossible to predict the complete dynamic subsidence basin. In this study, a method combining the WeiBull time function and the improved probabilistic integral method (IPIM) model was established based on the PIM model, and a method for predicting the dynamic subsidence basin in the mining area was proposed by integrating the IPIM and the combined WeiBull time function. Time-series subsidence data, obtained using SBAS-InSAR, were used as fitting data, and the parameters of the combined WeiBull function were inverted, pixel by pixel, to predict the dynamic subsidence of the working face in the study area. Based on the predicted surface subsidence results of a certain moment in the working face, the parameters of the IPIM model were inverted to predict the subsidence value in the incoherent region. The subsidence predictions of the combined WeiBull time function and the IPIM model were fused using inverse distance weighting (IDW) interpolation to restore the complete subsidence basin in the mining area. This method was tested at the Wannian Mine in Hebei, and the obtained complete subsidence basin was compared with the measured data, with an absolute error range of 0 to 10 mm. The results show that the dynamic subsidence basin prediction method for the SBAS-InSAR mining area, involving the combination of the IPIM model and the combined WeiBull model, can not only accurately fit the time series of surface observation points affected by mining but also accurately restore the subsidence data in the incoherent region to obtain complete subsidence basin information in the mining area.