In this paper, a novel DOA estimation methodology based upon the technology of adaptive nulling antenna is proposed. Initially, the nulling antenna obtains the weight vector by LMS algorithm and power inversion criterion. Afterwards, reciprocal of the antenna pattern is defined as the spatial spectrum and the extracted peak values are corresponded to the estimated DOA. Through observation of the spectrum and data analysis of variable steps and SNRs, the simulation results demonstrate that the proposed method can estimate DOA above board. Furthermore, the estimation error of the proposed technique is directly proportional to step size and is inversely proportional to SNR. Unlike the existing MUSIC algorithm, the proposed algorithm has less computational complexity as it eliminated the need of estimating the number of signals and the eigenvalue decomposition of covariance matrix. Also it outperforms MUSIC algorithm, the recently proposed MUSIC-Like algorithm and classical methods by achieving better resolution with narrow width of peaks.
In this paper, we propose a new technique to generate a range-angle dependent transmit beampattern by introducing a nonlinear frequency modulation scheme based on arctangent function in the frequency diverse array (FDA) system. The propagation process of the transmitted signals is usually neglected in most of the existing range-angle dependent transmit beampattern synthesis schemes. More specifically, the time variable is considered to be a constant value or defined from 0 to T, where Tis the pulse duration for pulsed FDA. As a result, such schemes cease to focus the signal power at a desired position for a period of time when this practical constraint is taken into account. The proposed methodology incorporates the propagation process of the transmitted signal and simultaneously focuses the signal power at a desired position and lasting for a period of time. We investigate the consequences of this constraint briefly and also explain the corrected model. Numerical simulations are implemented to validate the theoretical analysis of the proposed methodology.
8 May 2018 in COMPEL - The international journal for computation and mathematics in electrical and electronic engineering
Purpose: Direction-of-arrival (DOA) estimation for wideband sources has attracted a growing interest in the recent decade because wideband sources are incorporated in many real-world applications such as communication systems, radar, sonar and acoustics. One way to estimate the DOAs of wideband signals is to decompose it into narrowband signals using discrete Fourier transform (DFT) and then apply well-established narrowband algorithms to each signal. Afterwards, results are averaged to yield the final DOAs. These techniques require scanning the full band of wideband sources, ultimately degrading the resolution and increasing complexity. This paper aims to propose a new DOA estimation methodology to solve these problems. Design/methodology/approach: The new DOA estimation methodology is based on incoherent signal subspace method (ISSM). The proposed approach presents a criterion to select a single sub-band of the selected narrowband signals instead of scanning the whole signal spectrum. Then, the DOAs of wideband signals are estimated using the selected sub-band. Therefore, it is named as single sub-band (SSB)-ISSM. Findings: The computational complexity of the proposed method is much lower than that of traditional DFT-based methods. The effectiveness and advantages of the proposed methodology are theoretically investigated, and computational complexity is also addressed. Originality/value: To verify the theoretical analysis, computer simulations are implemented, and comparisons with other algorithms are made. The simulation results show that the proposed method achieves better performance and accurately estimates the DOAs of wideband sources.
23 June 2022 in International Journal of Distributed Sensor Networks
The design and implementation of energy-efficient routing protocols for next-generation wireless sensor networks is always a challenge due to limited power resource capabilities. Hierarchical (clustering) routing protocols appeared to be a remarkable solution for extending the lifetime of wireless sensor networks, particularly in application-aware (threshold-sensitive) and heterogeneity-aware cluster-based routing protocols. In this article, we propose a protocol, namely, Threshold-based Energy-aware Zonal Efficiency Measuring hierarchical routing protocol. It is a heterogeneity-aware and threshold-based protocol that provides a better solution to existing problems in next-generation wireless sensor networks. During execution, the Threshold-based Energy-aware Zonal Efficiency Measuring hierarchical routing protocol splits the entire network area into several zones to manage network traffic efficiently. In the first step, Threshold-based Energy-aware Zonal Efficiency Measuring hierarchical routing protocol is designed for a homogeneous network where the initial energy of all the nodes is the same. Thereafter, we bring in heterogeneity in the Threshold-based Energy-aware Zonal Efficiency Measuring hierarchical routing protocol execution environment to optimize its energy consumption. By investigating the performance of the various numbers of divisions, it is proved that the Threshold-based Energy-aware Zonal Efficiency Measuring hierarchical routing protocol with 9 zonal divisions has higher stability and throughput. The performance of the proposed Threshold-based Energy-aware Zonal Efficiency Measuring hierarchical routing protocol is compared with those of Stable Election Protocol, Low-Energy Adaptive Clustering Hierarchy, Modified Low-Energy Adaptive Clustering Hierarchy, and Gateway-Based Energy-Efficient Routing Protocol through computer simulations. Simulation results verify the improved performance of the proposed Threshold-based Energy-aware Zonal Efficiency Measuring hierarchical routing protocol in terms of network stability, lifetime, and throughput.
1 January 2018 in Progress In Electromagnetics Research M