Mobile-edge computing (MEC) has emerged as a prominent technology to overcome sudden demands on computation-intensive applications of the Internet of Things (IoT) with finite processing capabilities. Nevertheless, the limited energy resources also seriously hinder IoT devices from offloading tasks that consume high power in active RF communications. Despite the development of energy harvesting (EH) techniques, the harvested energy from surrounding environments could be inadequate for power-hungry tasks. Fortunately, backscatter communications (Backcom) is an intriguing technology to narrow the gap between the power needed for communication and harvested power. Motivated by these considerations, this article investigates a backscatter-assisted data offloading in OFDMA-based wireless-powered (WP) MEC for IoT systems. Specifically, we aim at maximizing the sum computation rate by jointly optimizing the transmit power at the gateway (GW), backscatter coefficient, time-splitting (TS) ratio, and binary decision-making matrices. This problem is challenging to solve due to its nonconvexity. To find solutions, we first simplify the problem by determining the optimal values of transmit power of the GW and backscatter coefficient. Then, the original problem is decomposed into two subproblems, namely, TS ratio optimization with given offloading decision matrices and offloading decision optimization with given TS ratio. Especially, a closed-form expression for the TS ratio is obtained which greatly enhances the CPU execution time. Based on the solutions of the two subproblems, an efficient algorithm, termed the fast-efficient algorithm (FEA), is proposed by leveraging the block coordinate descent method. Then, it is compared with exhaustive search (ES), the bisection-based algorithm (BA), edge computing (EC), and local computing (LC) used as reference methods. As a result, the FEA is the best solution which results in a near-globally-optimal solution at a much lower complexity as compared to benchmark schemes. For instance, the CPU execution time of FEA is about 0.029 s in a 50-user network, which is tailored for ultralow latency applications of IoT networks.

Radio-frequency (RF) energy harvesting (EH) in wireless relaying networks has attracted considerable recent interest, especially for supplying energy to relay nodes in Internetof-Things (IoT) systems to assist the information exchange between a source and a destination. Moreover, limited hardware, computational resources, and energy availability of IoT devices have raised various security challenges. To this end, physical layer security (PLS) has been proposed as an effective alternative to cryptographic methods for providing information security. In this study, we propose a PLS approach for simultaneous wireless information and power transfer (SWIPT)-based halfduplex (HD) amplify-and-forward (AF) relaying systems in the presence of an eavesdropper. Furthermore, we take into account both static power splitting relaying (SPSR) and dynamic power splitting relaying (DPSR) to thoroughly investigate the benefits of each one. To further enhance secure communication, we consider multiple friendly jammers to help prevent wiretapping attacks from the eavesdropper. More specifically, we provide a reliability and security analysis by deriving closed-form expressions of outage probability (OP) and intercept probability (IP), respectively, for both the SPSR and DPSR schemes. Then, simulations are also performed to validate our analysis and the effectiveness of the proposed schemes. Specifically, numerical results illustrate the non-trivial trade-off between reliability and security of the proposed system. In addition, we conclude from the simulation results that the proposed DPSR scheme outperforms the SPSRbased scheme in terms of OP and IP under the influences of different parameters on system performance.

The requirements for facilitating spectral efficiency and energy efficiency become increasing important for future wireless networks. Ambient backscatter communication (AmBC) has recently been recognized as a technology to meet these requirements. Furthermore, reconfigurable intelligent surfaces (RISs) have recently emerged as an effective technology to ameliorate the performance of wireless communications. Motivated by these, this paper investigates the channel characterization and the performance of the RIS-assisted AmBC system. Particularly, we derive the closed-form expressions of the outage probability (OP) and average symbol error rate (ASER) of the considered system. To gain insight into the systems, the asymptotic OP and diversity order are obtained too. Monte Carlo simulations are employed to verify our obtained analytical result. Our findings unveil that the performance of the RIS-assisted AmBC systems is significantly better than that of the conventional AmBC system.

This study investigates a two-way relaying non-orthogonal multiple access (TWR-NOMA) enabled Internet-of-Things (IoT) network, in which two NOMA users communicate via an IoT access point (IAP) relay using a decode-and-forward (DF) protocol. A power beacon (PB) is used to power the IAP to address the IAP's limited lifetime due to energy constraints. Since co-channel interference (CCI) is inevitable in IoT systems, this effect is also studied in the proposed system to improve practicality. Based on the proposed system model, the closed-form equations for the exact and asymptotic outage probability (OP) and ergodic data (ED) of the NOMA users' signals are first derived to describe the performance of TWR-NOMA systems. The system's diversity order and throughput are then evaluated according to the derived results. To further improve the system's performance, a low-complexity strategy 2D golden section search (GSS) is performed, subject to power allocation (PA) and time-switching (TS) factors, to optimize the outage performance. Finally, a deep learning design with minimal computing complexity and precision OP prediction is established for a real-time IoT network configuration. The numerical results are discussed and analyzed in terms of the effects of the CCI, the TS ratio, the PA factor, the fading parameter on the OP, system throughput, and ED.

In this research, we proposed and investigated the physical layer system called the full-duplex (FD) power beacon-assisted (PB) energy harvesting (EH) relaying cooperative network. The system model has one PB node, one destination (D), one source (S), and one relay (R) node. We investigated the system performance in terms of outage probability (OP) and system throughput (ST) with the power-splitting (PS) protocol in both delay-tolerant (DTT) and delay-limited (DLT) transmission modes. Moreover, the optimal power splitting (PS) factor in both DDT and DLT modes is proposed and derived. Finally, the mathematical closed-form expressions of the OP and ST are derived by using the Monte Carlo simulation with the help of MATLAB software. From the results, it can be observed that the analytical values and simulation values are the same in the effect of the main system parameters.