An electrical and mechanical design process for a traction motor in a hybrid bus application is studied. Usually, the design process of an electric machine calls for close cooperation between various engineering disciplines. Compromises may be required to satisfy the boundary conditions of electrical, thermal, and mechanical performances. From the mechanical point of view, the stress values and the safety factors should be at a reasonable level and the construction lifetime predicted by a fatigue analysis. In a vehicle application, the motor has to be capable of generating high torque when accelerating, and in normal operation, the losses of the machine should be low to be able to cool the machine. Minimization of the no-load iron losses becomes a very important electrical design requirement if the traction motor and the generator are mechanically connected with an internal combustion engine when it is operating as the only source of torque. The manufacturing costs of the motor are also taken into account in this paper.
30 June 2011 in IEEE Transactions on Industrial Electronics
Energy efficient pulse-width modulation inverters are widely used to control electrical machines accurately for process needs. The pulse-width modulation, however, has also adverse effects and produces additional losses in the motor. These losses increase the motor temperature and result in derating of the machine power in converter use. A reliable and reasonably accurate loss model of an induction motor drive system is important for the performance prediction of a variable-speed drive. A two-level frequency converter main circuit model is coupled to a finite-element method motor model. The drive model is controlled by closed-loop direct torque control. The frequency converter losses are calculated analytically, and the finite-element method motor model provides an analysis of the motor losses. The simulation results are compared with measurement results.
26 May 2021 in IEEE Transactions on Industry Applications
High-speed solid-rotor induction machines (HSIMs) are popular within high-speed (HS) applications because of their high rotor structural integrity and their fairly well-established manufacturing process guaranteeing high quality series products. Designing a new HS electric machine requires a multidisciplinary team to accomplish the machine performance desired. In case of a HS machine design, the components and applied materials often reach their physical limits at the rated operating condition. Therefore, the design process is highly iterative and, thus, a systematic approach has a high potential to reduce the time of the design phase significantly. In this article, a systematic design process is proposed for a modular, multimegawatt (MMW) HSIM with three radial active magnetic bearings. The process includes a traditional multidisciplinary design flow with extra critical aspects of MMW HS machines: manufacturability, bearing system, housing, and operating unit. In addition, the manufactured machine is reported. The proposed systematic design process is described, including several multidisciplinary critical design aspects of HS machinery.
1 June 2013 in IEEE Transactions on Power Electronics
In this paper, the results of a European efficiency measurement for a 250-kW high-efficiency grid-connected solar inverter are presented. The efficiency measurements are performed both by electrical input-output and calorimetric methods. Two measurement series with input voltage levels of 500 and 750 VDC are carried out. An open- and balance-type calorimeter system that can measure power losses up to 30 kW is introduced and verified by resistor tests. The measurement results and their uncertainty are analyzed and discussed.
20 April 2016 in IEEE Transactions on Industrial Electronics
This paper presents an energy efficiency analysis of a 37-kW standard squirrel-cage induction motor under sinusoidal and nonsinusoidal supply. The motor losses are analyzed using the conventional IEC loss segregation method and also numerically modeled using finite-element simulations. The measured and simulated loss components are compared with three different modulation methods. The overall simulated losses are in good agreement with the measured ones, but there exist differences in the loss components.
10 November 2015 in IEEE Transactions on Industrial Electronics
Synchronous reluctance motors (SynRMs) are gaining in popularity in industrial drives due to their permanent magnet-free, competitive performance, and robust features. This paper studies the power losses in a 90-kW converter-fed SynRM drive by a calorimetric method in comparison of the traditional input-output method. After the converter and the motor were measured simultaneously in separate chambers, the converter was installed inside the large-size chamber next to the motor and the total drive system losses were obtained using one chamber. The uncertainty of both measurement methods is analyzed and discussed.