Photonic liquid crystal fibers (PLCFs) can be categorized in two principal groups: index guiding PLCFs and photonic bandgap PLCFs. In this paper we focus on index guiding PLCFs in which effective refractive index of the micro structured cladding filled with liquid crystal is lower than refractive index of the fiber core. In these fibers broadband propagation of light is observed and also effective tuning of guiding properties is possible. In this paper PLCFs with tunable attenuation, retardation and polarization dependent losses are reported. We also enumerate some potential applications of index-guiding PLCFs, together with discussion of few technical issues important in the context of future development (i.e., effective electrical steering and connecting with standard fibers).
27 December 2017 in Beilstein Journal of Nanotechnology
Thermo- and electro-optical properties of a photonic liquid crystal fiber (PLCF) enhanced by the use of dopants have been investigated. A 6CHBT nematic liquid crystal was doped with four different concentrations of gold nanoparticles (NPs), 0.1, 0.3, 0.5 and 1.0 wt %, for direct comparison of the influence of the dopant on the properties of the PLCF. The thermo-optical effects of the liquid crystal doped with gold NPs were compared in three setups, an LC cell, a microcapillary and within the PLCF, to determine if the observed responses to external factors are caused by the properties of the infiltration material or due to the setup configuration. The results obtained indicated that with increasing NP doping a significant reduction of the rise time under an external electric field occurs with a simultaneous decrease in the nematic–isotropic phase transition temperature, thus improving the thermo- and electro-optical properties of the PLCF.
In this paper, we present our recent research results on light propagation in photonic crystal fibers (PCFs) infiltrated with a 6CHBT nematic liquid crystal (LC) doped with 2-nm gold nanoparticles (NPs) with a concentration in the range of 0.01 – 0.5% wt. Electro-optical response times and thermal tuning of the investigated samples have been studied in detail. We have observed up to ~80% decrease of rise times for different concentrations of gold NPs in the LC. Moreover, a significant reduction of the Fréedericksz threshold voltage (up to 60%) has been observed for samples with higher concentrations of 2-nm gold NPs in 6CHBT.
Controllable alignment of liquid crystal molecules inside micro-capillaries is an essential issue to obtain repeatable devices based on photonic liquid crystal fibres. In this paper we describe in detail the photo-alignment technique for micro-capillaries based on sulfuric azo dye SD-1 which allows for stable alignment of liquid crystal molecules in the direction defined by the polarisation of ultraviolet light. Two-step selective irradiation allowed for periodic patterns in which two different alignment configurations were observed simultaneously within a single capillary. The obtained alignment was very stable, even in capillaries as thick as 125 μm of internal diameter.
A variety of alignment configurations of liquid crystals (LCs) inside the glassy cylindrical capillaries is realized by using alignment materials providing different anchoring. The radial configuration with central disclination line is obtained for homeotropic boundary conditions. In turn, the axial, transversal and tilted alignment structures are realized by using materials for planar anchoring. The uniformity and controlling of the latter structures were provided by photoalignment method. This approach can be further used to control LC alignment in the photonic crystal fibers recognized as advanced elements for different optical devices.