This research aimed to study the influence of lyocell with incorporated ZnO (CLY) for antibacterial activity and biodegradation of fiber blends composed of viscose (CV), flax (LI), and CLY. Fiber blended samples with an increased weight fraction of CLY fibers were composed, and single CLY, CV and LI fibers were also used for comparison. Antibacterial activity was determined for the Gram-negative Escherichia coli and the Gram-positive Staphylococcus aureus bacteria. The biodegradation of fiber blends was investigated by the soil burial test. The results show that the single CLY fibers exhibited high antimicrobial activity against both E. coli and S. aureus bacteria and that the presence of LI fibers in the blended samples did not significantly affect antibacterial activity against E. coli, but drastically decreased the antibacterial activity against S. aureus. LI fibers strongly promoted the growth of S. aureus and, consequently, impaired the antimicrobial performance of ZnO against this bacterium. The presence of CLY fibers slowed down, but did not prevent, the biodegradation process of the fiber blends, even at the highest ZnO concentration. The soil that was in contact with the fiber blended samples during their burial was not contaminated to such an extent as to affect the growth of sprouts, confirming the sustainability of the fiber blends.
A bio-epoxy surface adhesive for adherence of the metal component species to glass substrate with desirable adhesion strength, converted controlled removal upon request, and bio-based resource inclusion was developed. For the development of resin, three different lignin-based aromatic monophenols, guaiacol, cresol, and vanillin, were used in the chemical epoxidation reaction with epichlorohydrin. The forming transformation process was studied by viscoelasticity, in situ FTIR monitoring, and Raman. Unlike other hydroxyl phenyls, guaiacol showed successful epoxide production, and stability at room temperature. Optimization of epoxide synthesis was conducted by varying NaOH concentration or reaction time. The obtained product was characterized by nuclear magnetic resonance and viscosity measurements. For the production of adhesive, environmentally problematic bisphenol A (BPA) epoxy was partially substituted with the environmentally acceptable, optimized guaiacol-based epoxy at 20, 50, and 80 wt.%. Mechanics, rheological properties, and the possibility of adhered phase de-application were assessed on the bio-substitutes and compared to commercially available polyepoxides or polyurethanes. Considering our aim, the sample composed of 80 wt.% bio-based epoxy/20 wt.% BPA thermoset was demonstrated to be the most suitable among those analyzed, as it was characterized by low BPA, desired boundary area and recoverability using a 10 wt.% acetic acid solution under ultrasound.
The development of durable multifunctional properties is crucial for the production of high-performance technical textiles. In this work, a novel, environmentally friendly and facile method was developed for the chemical modification of cotton fabric by in situ biosynthesis of Ag NPs in the presence of sumac leaf extract as a reducing agent on TiO2, ZnO and TiO2 + ZnO previously applied to cotton fibres. The results showed that the presence of TiO2, ZnO and TiO2 + ZnO significantly increased the concentrations of the synthesised Ag NPs on the cotton fibres compared to the one-component Ag coating. This resulted in excellent antimicrobial properties of the TiO2/Ag, ZnO/Ag and TiO2 + ZnO/Ag composites even after 25 washes. While the TiO2 and ZnO particles in the composite were incompatible, the synergistic effect among Ag, TiO2 and ZnO in the composites resulted in excellent UV blocking properties of the coatings before and after 25 washes. Since the biosynthesis of Ag NPs was accompanied by a yellow–brown colouration of the samples, the photocatalytic self-cleaning of the composite coating could not be determined from the photodegradation rate of the coffee stains. This research provides a new environmentally friendly approach to producing durable antimicrobial and UV blocking coatings on cotton fibres.