We mainly investigated the effect of the valence state of photorefractive resistant elements on the photorefractive properties of codoped crystals, taking the Zn and Mo codoped LiNbO3 (LN:Mo,Zn) crystal as an example. Especially, the response time and photorefractive sensitivity of 7.2 mol% Zn and 0.5 mol% Mo codoped with LiNbO3 (LN:Mo,Zn7.2) crystal are 0.65 s and 4.35 cm/J at 442 nm, respectively. The photorefractive properties of the LN:Mo,Zn crystal are similar to the Mg and Mo codoped LiNbO3 crystal, which are better than the Zr and Mo codoped LiNbO3 crystal. The results show that the valence state of photorefractive resistant ions is an important factor for the photorefractive properties of codoped crystals and that the LN:Mo,Zn7.2 crystal is another potential material with fast response to holographic storage.
A series of mono-, double-, and tri-doped LiNbO3 crystals with vanadium were grown by Czochralski method, and their photorefractive properties were investigated. The response time for 0.1 mol% vanadium, 4.0 mol% zirconium, and 0.03 wt.% iron co-doped lithium niobate crystal at 488 nm was shortened to 0.53 s, which is three orders of magnitude shorter than the mono-iron-doped lithium niobate, with a maintained high diffraction efficiency of 57% and an excellent sensitivity of 9.2 cm/J. The Ultraviolet-visible (UV-Vis) and OH− absorption spectra were studied for all crystals tested. The defect structure is discussed, and a defect energy level diagram is proposed. The results show that vanadium, zirconium, and iron co-doped lithium niobate crystals with fast response and a moderately large diffraction efficiency can become another good candidate material for 3D-holographic storage and dynamic holography applications.
We grew a series of co-doped LiNbO3 crystals with fixed 1.5 mol % ZrO2 and various MgO concentrations (1.0, 3.0, 4.0, 6.0 mol %), and investigated their optical properties and defect structures. By 3.0 mol % MgO co-doping, the optical damage resistance at 532 nm reached 6.5 × 106 W/cm2, while the phase-matching temperature for doubling 1064 nm was only 29.3 °C—close to room temperature—which was conducive to realizing the 90° phase matching at room temperature by slightly modulating the incident angle of the fundamental beam. Notably, we found that the phase-matching temperature increased linearly with the increase of MgO doping, and this linear dependence helped us to grow the high-quality crystal for room temperature 90° phase matching. Moreover, the defect analysis indicated that the linear tuning of phase-matching temperature might be attributed to + neutral pairs in crystals.