Interest in polymer optical fiber Bragg gratings (POFBGs) arises from the different material properties and sensing modalities brought by polymers relative to silica. Polymer fibers typically offer twice the sensitivity to temperature of conventional silica fiber and increased sensitivity to strain overall. In addition, polymer fibers have higher elastic limits and as a result a larger range of operation for physical constraints. While some polymers are effectively humidity insensitive, others present inherent humidity sensitivity. Their organic properties also allow a variety of chemical processes to create (bio)chemical sensors, with the consequences of fiber breakage in situ being less hazardous than silica. These attributes have led to the use of POFBGs for applications that remain complex using silica fibers. This review article covers the progress towards commercialization and the increasing number of specific applications.
We demonstrate a largely tunable dispersion fiber Bragg grating (FBG) inscribed in a microstructured polymer optical fiber (mPOF). The bandwidth of the chirped FBG (CFBG) was achieved from 0.11 to 4.86 nm, which corresponds to a tunable dispersion range from 513.6 to 11.15 ps/nm. Furthermore, thermal sensitivity is used to compensate for the wavelength shift due to the applied strain. These results demonstrate that a CFBG in a POF is a promising technology for future optical systems.
We present a polymer fibre Bragg grating sensor and its sensitivity to gamma radiation by observing the reflected spectral profile. The Bragg grating is femtosecond inscribed within a perfluorinated CYTOP fibre and the alteration of the Bragg wavelength corresponds to the total radiation dose received. Over a total dose of 41 Gy, the fibre demonstrates a sensitivity of / Gy and a resolution of 40 Gy. Under active consideration for the instrumentation of nuclear waste repositories, this study gives a better understanding of the effects of gamma radiation upon Bragg gratings in CYTOP fibres.
We obtained chirped gratings by performing hot water gradient thermal annealing of uniform poly (methylmethacrylate) (PMMA) microstructured polymer optical fiber Bragg gratings (POFBGs). The proposed method’s simplicity is one of its main advantages because no special phase mask or additional etching are needed. It not only enables easy control tuning of the central wavelength and chirp characteristics, but it also leads to obtain flexible grating response, compared with tapered chirped POFBGs. Therefore, a flexible and low-cost chirped POFBG devices fabrication technique has been presented by using a single uniform phase mask.
6 August 2018 in IEEE Photonics Technology Letters
We demonstrate the Bragg gratings inscription in the 850-nm spectral region by using trans-4-stilbenemethanol-doped poly methyl methacrylate step-index optical fiber and a 248-nm krypton fluoride (KrF) excimer laser system. The gratings inscription only takes 0.4 s. A detailed study of the grating fabrication process using different pulse repetition rates is also reported. In addition, temperature, humidity, and strain sensitivities are measured to demonstrate the potentiality of these components for different sensing applications.
Opto-acoustic imaging is a growing field of research in recent years, providing functional imaging of physiological biomarkers, such as the oxygenation of haemoglobin. Piezo electric transducers are the industry standard detector for ultrasonics, but their limited bandwidth, susceptibility to electromagnetic interference and their inversely proportional sensitivity to size all affect the detector performance. Sensors based on polymer optical fibres (POF) are immune to electromagnetic interference, have lower acoustic impedance and a reduced Young’s Modulus compared to silica fibres. Furthermore, POF enables the possibility of a wideband sensor and a size appropriate to endoscopy. Micro-structured POF (mPOF) used in an interferometric detector has been shown to be an order of magnitude more sensitive than silica fibre at 1 MHz and 3 times more sensitive at 10 MHz. We present the first opto-acoustic measurements obtained using a 4.7mm PMMA mPOF Bragg grating with a fibre diameter of 130 μm and present the lateral directivity pattern of a PMMA mPOF FBG ultrasound sensor over a frequency range of 1-50 MHz. We discuss the impact of the pattern with respect to the targeted application and draw conclusions on how to mitigate the problems encountered.