Accurate estimation of lithium battery state of charge is very important for ensuring the operation of battery management system, realizing the energy management strategy of electric vehicles, reducing mileage anxiety and promoting the sustainable development of electric vehicles. In this paper, several studies are carried out for state of charge estimation of lithium-ion battery: (1) Aiming at the problem of parameter identification of battery model, an optimal identification method of model parameters based on ant lion optimization algorithm is proposed. (2) An adaptive weighting Cubature particle filter (AWCPF) method is proposed for SOC estimation. The proposed AWCPF method is based on particle filter (PF) algorithm, while the Cubature Kalman filter (CKF) algorithm is utilized to generate the proposal distribution for PF algorithm, which can retrain the particles degradation problem in PF algorithm. To solve the problem that the CKF algorithm is sensitive to noise, comparing with fixed sigma point weights of the conventional CKF, the weights of sigma points are adaptively adjusted based on state and measurement residual vectors. Furthermore, the process noise and measurement noise are estimated iterative. In this paper, experimental verification of different initial values of SOC under various working conditions is carried out. The results show that the proposed AWCPF algorithm based SOC estimation method has high estimation accuracy, strong robustness, fast convergence speed, with the maximum SOC estimation error is less than 1%.

The complicated coupling of component design together with energy management has brought a significant challenge to the design, optimization, and control of plug-in hybrid electric buses (PHEBs). This paper proposes an integrated optimization methodology to ensure the optimum performance of a PHEB with a view toward designing and applications. First, a novel co-optimization method is proposed for redesigning the driveline parameters offline, which combines a nondominated sorting genetic algorithm-II (NSGA-II) with dynamic programming to eliminate the impact of the coupling between the component design and energy management. Within the new method, the driveline parameters are optimally designed based on a global optimal energy management strategy, and fuel consumption and acceleration time can be respectively reduced by 4.71% and 4.59%. Second, a model-free adaptive control (MFAC) method is employed to realize the online optimal control of energy management on the basis of Pontryagin’s minimum principle (PMP). Particularly, an MFAC controller is used to track the predesigned linear state-of-charge (SOC), and its control variable is regarded as the co-state of the PMP. The main finding is that the co-state generated by the MFAC controller gradually converges on the optimal one derived according to the prior known driving cycles. This implies that the MFAC controller can realize a real-time application of the PMP strategy without acquiring the optimal co-state by offline calculation. Finally, the verification results demonstrated that the proposed MFAC-based method is applicable to both the typical and unknown stochastic driving cycles, meanwhile, and can further improve fuel economy compared to a conventional proportional-integral-differential (PID) controller.

Differential comparison between faulty and normal cells is currently the main way to recognize internal short circuit (ISC) in the battery pack, which is prone to generate false alarms for inconsistent cells. In view of this, we innovatively propose a new method of ISC identification based on self-comparison of cell history data. The research data is the cell charging voltage with unified charging protocol after smoothing by wavelet transform method. The selection of research data is accomplished under the dynamic voltage window mechanism to ensure the robustness of the strategy to the different charging habits of the users. Based on the proposed voltage consistency assumption of adjacent charging cycles for one cell, the dynamic time warping algorithm is rationally chosen as the feature parameter extraction method to address the difficulty of similarity assessment for unequal length voltage series, which realizes the accumulation of voltage anomaly deviation. The improved density-based spatial clustering of applications with noise algorithm can realize the adaptive adjustment of hyperparameters according to the data discretization degree, which improves its adaptability to different datasets and avoids the misclassification of slight outlier samples. Based on experimental and real fault data, the final validation and comparison results indicate that the proposed strategy is robust to cell inconsistency and widely applicable to different types of batteries. An average accuracy of 99% and a one-time computation cost of 0.14 s are obtained, and potentially threatening hidden faults in real vehicles can be predicted up to 5 days in advance.

Aiming at improving the tracking stability performance for intelligent electric vehicles, a novel stability coordinated control strategy based on preview characteristics is proposed in this paper. Firstly, the traditional stability control target is introduced with the two degrees of freedom model, which is realized by the sliding mode control strategy. Secondly, an auxiliary control target further amending the former one with the innovation formulation of the preview characteristics is established. At last, a multiple purpose Vague set leverages the contribution of the traditional target and the auxiliary preview target in various vehicle states. The proposed coordinated control strategy is analyzed on the MATLAB/CarSim simulation platform and verified on an intelligent electric vehicle established with A&D5435 rapid prototyping experiment platform. Simulation and experimental results indicate that the proposed control strategy based on preview characteristics can effectively improve the tracking stability performance of intelligent electric vehicles. In the double lane change simulation, the peak value of sideslip angle, yaw rate, and lateral acceleration of the vehicle is reduced by 13.2, 11.4, and 8.9 compared with traditional control strategy. The average deviations between the experimental and simulation results of yaw rate, lateral acceleration, and steering wheel angle are less than 10 at different speeds, which demonstrates the consistency between the experimental and the simulation results.