The complicated coupling of component design together with energy management has brought a significant challenge to the design, optimization, and control of plug-in hybrid electric buses (PHEBs). This paper proposes an integrated optimization methodology to ensure the optimum performance of a PHEB with a view toward designing and applications. First, a novel co-optimization method is proposed for redesigning the driveline parameters offline, which combines a nondominated sorting genetic algorithm-II (NSGA-II) with dynamic programming to eliminate the impact of the coupling between the component design and energy management. Within the new method, the driveline parameters are optimally designed based on a global optimal energy management strategy, and fuel consumption and acceleration time can be respectively reduced by 4.71% and 4.59%. Second, a model-free adaptive control (MFAC) method is employed to realize the online optimal control of energy management on the basis of Pontryagin’s minimum principle (PMP). Particularly, an MFAC controller is used to track the predesigned linear state-of-charge (SOC), and its control variable is regarded as the co-state of the PMP. The main finding is that the co-state generated by the MFAC controller gradually converges on the optimal one derived according to the prior known driving cycles. This implies that the MFAC controller can realize a real-time application of the PMP strategy without acquiring the optimal co-state by offline calculation. Finally, the verification results demonstrated that the proposed MFAC-based method is applicable to both the typical and unknown stochastic driving cycles, meanwhile, and can further improve fuel economy compared to a conventional proportional-integral-differential (PID) controller.
5 January 2021 in Mathematical Problems in Engineering
Accurate estimation of vehicle states is extremely crucial for vehicle stability control. As a reliable estimation methodology, the unscented Kalman filter (UKF) has been widely utilized in vehicle control. However, the estimation accuracy still needs to be improved caused by the unpredictable measurement and process noise. In this paper, a novel modified UKF state estimation methodology combined with the ant lion optimization (ALO) is proposed for the stability control of a four in-wheel motor independent drive electric vehicle (4WIDEV). First, the optimal performance of the ALO algorithm is analyzed, where both unimodal and multimodal optimization test functions are selected and optimized by GA, PSO, and ALO, respectively. The results indicate that the ALO algorithm has good global optimization capability and applicability. Second, the ALO algorithm is merged into the UKF to adjust the statistical properties of noise information for the ALOUKF estimator design without extra sensor signals. At last, the simulations on the Matlab/Simulink-CarSim co-simulation platform and the road test based on an A&D 5435 rapid prototyping experiment platform (RPP) are carried out to verify the proposed method. The simulation and experiment results demonstrate that the ALOUKF estimator can improve state estimation accuracy and resist the vehicle nonlinearity even in the case of the complicated and emergency maneuvers.
This paper presents an innovative three-level direct yaw moment control strategy for distributed drive electric vehicles (DDEV) under emergency conditions. The phase plane analysis is used at the supervisory level to design the stability boundary function taking into account the impact of the road adhesion coefficient. To guarantee the performance of finite-time convergence and singularity-free methods, the adaptive nonsingular fast terminal sliding mode control (ANFTSMC) is developed at the decision level to determine the extra yaw moment for tracking the intended side slip angle and yaw rate. Among this, the unstable domain in the phase plane is further separated into moderately and severely unstable according to the degree of vehicle instability, which is defined by the distance between the state phase point and the stability boundary. Meanwhile, the adaptive weight between the handling and stability is obtained. At the executive level, the quadratic programming algorithm is adopted to allocate four-wheel torque with the objective of optimal tire utilization rate. Finally, the co-simulation test is executed in both closed-loop and open-loop circumstances; according to the simulation results, the presented ANFTSMC method outperforms the SMC, and it can decrease the tracking error and improve the handling and stability.
1 January 2019 in Mathematical Problems in Engineering
For lithium battery, which is widely utilized as energy storage system in electric vehicles (EVs), accurate estimating of the battery parameters and state of charge (SOC) has a significant effect on the prediction of energy power, the estimation of remaining mileage, and the extension of usage life. This paper develops an improved ant lion optimizer (IALO) which introduces the chaotic mapping theory into the initialization and random walk processes to improve the population homogeneity and ergodicity. After the elite (best) individual is obtained, the individual mutant operator is conducted on the elite individual to further exploit the area around elite and avoid local optimum. Then the battery model parameters are optimized by IALO algorithm. As for the SOC estimation, unscented Kalman filter (UKF) is a common algorithm for SOC estimation. However, a disadvantage of UKF is that the noise information is always unknown, and it is usually tuned manually by “trial‐and‐error” method which is irregular and time‐consuming. In this paper, noise information is optimized by IALO algorithm. The singular value decomposition (SVD) which is utilized in the process of unscented transformation to solve the problem of the covariance matrix may lose positive definiteness. The experiment results verify that the developed IALO algorithm has superior performance of battery model parameters estimation. After the noise information is optimized by IALO, the UKF can estimate the SOC accurately and the maximum errors rate is less than 1%.
The deployment of conditionally automated vehicles raises safety concerns, as drivers often engage in non-driving-related tasks (NDRTs), delaying takeover responses. This study investigates driver state monitoring (DSM) using multimodal physiological and ocular signals from the TD2D (Takeover during Distracted L2 Automated Driving) dataset, which includes synchronized electrocardiogram (ECG), photoplethysmography (PPG), electrodermal activity (EDA), and eye-tracking data from 50 participants across ten task conditions. Tasks were reassigned into three workload-based categories informed by NASA-TLX ratings. A unified preprocessing and feature extraction pipeline was applied, and 25 informative features were selected. Random Forest outperformed Support Vector Machine and Multilayer Perceptron models, achieving 0.96 accuracy in within-subject evaluation and 0.69 in cross-subject evaluation with subject-disjoint splits. Sensitivity analysis showed that temporal overlap had a stronger effect than window length, with moderately long windows (5–8 s) and partial overlap providing the most robust generalization. SHAP (Shapley Additive Explanations) analysis confirmed ocular features as the dominant discriminators, while EDA contributed complementary robustness. Additional validation across age strata confirmed stable performance beyond the training cohort. Overall, the results highlight the effectiveness of physiological and ocular measures for distraction detection in automated driving and the need for strategies to further improve cross-driver robustness.
As an indispensable part of modern information technology, artificial intelligence technology has been widely used in all walks of life in society. At the same time, it has promoted the rapid development of social industries and fields, and also brought unprecedented innovation and reform. The combination of artificial intelligence technology and enterprise financial management work innovatively puts forward enterprise intelligent financial system. With its comprehensive management function and rapid data processing ability, the enterprise intelligent financial system can improve the comprehensive management ability, optimize the decision-making level of the enterprise and enhance the competitive advantage of the enterprise.