Autonomous driving is becoming a pivotal technology that can realize intelligent transportation and revolutionize the future of mobility. Various types of sensors, including perception sensors and localization sensors, are essential for high-level autonomous and intelligent vehicles (AIV). In this paper, the characteristics of different sensors are compared, and the application characteristics and requirements of AIV are analyzed in depth. These analyses indicate that: GNSS, as the unique localization sensor that can obtain an absolute position, can not only provide all-weather position and time information for internal multi-sensor fusion but also act as a standard spatiotemporal reference for all autonomous systems; Furthermore, AIVs aim to provide safety for a mass user base ranging from tens to hundreds of millions; for this, AIVs require a global wide-area and instantaneous precise positioning service with location privacy protection. Based on a “geometry-bound” description of road grade and vehicle size, it has been found that GNSS requirements in autonomous vehicles include decimeter-level positioning with the assurance of high integrity. Combined with high-integrity GNSS implementation in the civil aviation field, GNSS different technology routes, and commercial solutions, a state space representation (SSR)-based GNSS high-precision augmentation positioning solution for AIV is summarized and introduced. The solution can achieve instantaneous, precise positioning with high integrity in a wide area by utilizing passive positioning mode with location privacy protection. In addition, the research progress on key technologies in the solution and existing challenges is investigated in detail by reviewing a series of publications.
Global Navigation Satellite System pseudorange biases are of great importance for precise positioning, timing and ionospheric modeling. The existence of BeiDou Navigation Satellite System (BDS) receiver-related pseudorange biases will lead to the loss of precision in the BDS satellite clock, differential code bias estimation, and other precise applications, especially when inhomogeneous receivers are used. In order to improve the performance of BDS precise applications, two ionosphere-free and geometry-free combinations and ionosphere-free pseudorange residuals are proposed to calibrate the raw receiver-related pseudorange biases of BDS on each frequency. Then, the BDS triple-frequency receiver-related pseudorange biases of seven different manufacturers and twelve receiver models are calibrated. Finally, the effects of receiver-related pseudorange bias are analyzed by BDS single-frequency single point positioning (SPP), single- and dual-frequency precise point positioning (PPP), wide-lane uncalibrated phase delay (UPD) estimation, and ambiguity resolution, respectively. The results show that the BDS SPP performance can be significantly improved by correcting the receiver-related pseudorange biases and the accuracy improvement is about 20% on average. Moreover, the accuracy of single- and dual-frequency PPP is improved mainly due to a faster convergence when the receiver-related pseudorange biases are corrected. On the other hand, the consistency of wide-lane UPD among different stations is improved significantly and the standard deviation of wide-lane UPD residuals is decreased from 0.195 to 0.061 cycles. The average success rate of wide-lane ambiguity resolution is improved about 42.10%.
For GPS medium-long baseline real-time kinematic (RTK) positioning, the troposphere parameter is introduced along with coordinates, and the model is ill-conditioned due to its strong correlation with the height parameter. For BeiDou Navigation Satellite System (BDS), additional difficulties occur due to its special satellite constellation. In fact, relative zenith troposphere delay (RZTD) derived from high-precision empirical zenith troposphere models can be introduced. Thus, the model strength can be improved, which is also called the RZTD-constrained RTK model. In this contribution, we first analyze the factors affecting the precision of BDS medium-long baseline RTK; thereafter, 15 baselines ranging from 38 km to 167 km in different troposphere conditions are processed to assess the performance of RZTD-constrained RTK. Results show that the troposphere parameter is difficult to distinguish from the height component, even with long time filtering for BDS-only RTK. Due to the lack of variation in geometry for the BDS geostationary Earth orbit satellite, the long convergence time of ambiguity parameters may reduce the height precision of GPS/BDS-combined RTK in the initial period. When the RZTD-constrained model was used in BDS and GPS/BDS-combined situations compared with the traditional RTK, the standard deviation of the height component for the fixed solution was reduced by 52.4% and 34.0%, respectively.