In this paper, a non-Fourier heat conduction model of ultra-short pulsed laser ablation of metal is established that takes into account the effect of the heat source, laser heating of the target, the evaporation and phase explosion of target material, the formation and expansion of the plasma plume, and interaction of the plasma plume with the incoming laser. Temperature dependent optical and thermophysical properties are also considered in the model due to the properties of the target will change over a wide range during the ultra-short pulsed laser ablation process. The results show that the plasma shielding has a great influence on the process of ultra-short pulsed laser ablation, especially at higher laser fluence. The non-Fourier effect has a great influence on the temperature characteristics and ablation depth of the target. The ultra-short pulsed laser ablation can effectively reduce the heat affected zone compared to nanosecond pulsed laser ablation. The comparison between the simulation results and the experimental results in the literature shows that the model with the plasma shielding and the non-Fourier effect can simulate the ultra-short pulsed laser ablation process better.
In this paper, a new numerical modeling method that combines a modified electromechanical model with a Teflon ablation model is proposed to simulate the working process of micro-pulsed plasma thruster (μPPT). The ablation mass accumulation during the discharge process and the non-Fourier effect during the ablation process are considered to improve simulation accuracy. Simulation results are in good agreement with experimental results. Furthermore, the influence of both the electrical and structural parts on the performance of μPPT was investigated by applying the combined model. It was proven that large capacitance of the capacitor and large gap-to-plate-width ratios can effectively improve the comprehensive performance of the thruster concluding the specific impulse, impulse bit, and efficiency. The results not only validate the theoretical model, but also guide the design and operation optimization of μPPT.
28 August 2019 in Journal of Physics D: Applied Physics
Particle-in-cell/Monte Carlo collision (PIC/MCC) algorithms are an outstanding numerical method for predicting the kinetic characteristics of discharge plasma. However, heavy computational costs limit its application, especially in large-scale plasma simulations. To investigate the distribution properties of plasma in magnetoplasmadynamic (MPD) thrusters, we used a scale reduction method called scaling law to simplify and accelerate the PIC/MCC simulation. In this method, the physical processes, including the particle motion and collisions, of discharge plasma remained unchanged, thereby preserving the similarity of the discharge system before and after scaling. On the basis of the scaling law, all the scaling schemes of the relevant physical quantities were obtained. We verified the scaling law by analysing the electron trajectories and densities in electromagnetic fields at different scaling factors. The scaling methodology shows great advantages in reducing the total computation and the time to achieve the convergence of the simulation. Therefore, the PIC/MCC model with the scaling law provides an efficient and in-depth understanding of the discharge plasma in MPD thrusters.
A laser-ignited solid-propellant-fed magnetoplasmadynamic thruster (LISMPDT) is developed and tested. In this kind of thruster, a solid propellant is placed in a hollow cathode tube. When it works, the propellant is ablated and partially ionized by the laser; then, the plasma flow enters the chamber and is accelerated by the electromagnetic interaction. Unlike the typical magnetoplasmadynamic thrusters, almost any solid material can be used as a propellant in the LISMPDT; no tanks, valves, or piping systems are required for the propulsion system. Moreover, as the particles involved in the discharge process are produced from the laser ablation process, it would lead to a directed initial velocity and higher ionization. Meanwhile, a part of the energy serving the thruster could also be derived from the laser quasi as an add-on to the discharge energy with the separation of the ignition power and the ignition power unit from the thruster system. Experiments on the discharge characteristics and thrust performances were conducted and analyzed. The results validated the feasibility of the LISMPDT, and the maximal specific impulse reached ∼780 s, while the maximal thrust efficiency was expected to be about 9% under different operating conditions. It was also found that increasing the initial discharge voltage would effectively improve the propulsion performance while a longer laser pulse width led to reduced performance.
Contributed by the low cost, the simulation method is considered an attractive option for the optimization and design of the supersonic combustor. Unfortunately, accurate and satisfactory modeling is time-consuming and cost-consuming because of the complex processes and various working conditions. To address this issue, a mathematical modeling for the combustor on the basis of the clustering algorithm, machine learning algorithm, and model migration strategy is developed in this paper. A general framework for the migration strategy of the combustor model is proposed among the similar combustors, and the base model, which is developed by training the machine learning model with data from the existing combustion processes, is amended to fit the unexampled combustor using the model migration strategy with a few data. The simulation results validate the effectiveness of the development strategy, and the migrated model is proved to be suitable for the new combustor in higher accuracy with less time and calculation.