Sadiq Al_jilizi

Dr. Sadiq Al_jilizi


Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 June 2020 in International Journal of Civil Engineering
Verified
Journal Article
Closed access
PDF file
SASadiq Al_jilizi
Sadiq Al_jilizi
Abdul-Sahib T. Al-MadhhachiAbdul-Sahib T. Al-Madhhachi
Abdul-Sahib T. Al-Madhhachi
ZAZainab talib Al-sharify
Zainab talib Al-sharify

19 April 2021 in International Journal of River Basin Management
Verified
Journal Article
Closed access
SMSaad Mulahasan
Saad Mulahasan
MSMay Saleh
May Saleh
SASadiq Al_jilizi
Sadiq Al_jilizi
In this research, complementary numerical and experimental physical models were conducted to investigate flow parameters around an isolated permeable spur dike using ANSYS FLUENT ver. 16.1 software. The volume of fluid method VOF with the help of CFD technique and the κ−ϵ turbulence model was used to simulate the complex free-surface flow by applying a geometric reconstruction scheme. Two different medium with different porosities were used, namely, gravel and glass beads. It was found that, for low flow rates values, there are no significant changes in the water profiles in both longitudinal and lateral directions for both media. Although for high flow rates values, the differences tend to be clearer. Results showed that there is a slight effects of the medium's properties if the dike width is less than 1/3 of width of the channel, in particular with low flow rate values. Good agreement was observed between the computational and the measured results for the water surface profiles. Also, there is an exact match between the lateral velocity distribution of gravels and glass beads. Downstream the dike, the lateral velocity profiles exhibit an S shape curve due to high velocity in the free flow and small flow velocity behind the porous dike. The results show good agreement between the CFD results and the experimental observations of the water surface profiles and velocity distribution according to the statistical analysis using some standard indexes error.

30 December 2012 in Journal of Environmental Studies
Verified
Journal Article
Closed access
PDF file
SASadiq Al_jilizi
Sadiq Al_jilizi
In this study, characteristics of the hydraulic jump in trapezoidal channel sections were analyzed and a general equation represents the solution of the hydraulic jump in the channels of arbitrary cross-sections (rectangular, triangular & trapezoidal) was driven depending on the momentum principle. The solution of the models was provided using Newton Raphson method. Consequently, Tables and charts of family curves of the conjugate depths ratio (r=y2/y1) have been prepared, for a very wide range values of Froude numbers and section ratios (k=b/zy). For each type of cross sections, the efficiency of the energy dissipation of the hydraulic jump was also analyzed and compared with each others. The relationship between the initial and sequent Froude numbers (FD1 and FD2) has been indicated for various values of k1=b/zy1. Depending on the results of conjugate depths ratio r = y2 / y1, the length of the hydraulic jump were estimated for a very wide range of k1=b/zy1, using two suggested models. It was found that the channel shape has insignificant effect on the efficiency of the energy dissipation of the hydraulic jump, although the triangular section tends to be more efficient than the others by about 10 percent in higher FD1. When (FD1 > 6), the velocity head after the jump could be neglected. When the section ratio k1 is approximately 3, the length ratio of the hydraulic jump (Lj / y2) reaches to a maximum value independent on the value of FD1. In all cases, it was shown that the comparison of the theoretical results with other experimental data indicate a very good agreement

15 September 2020 in KSCE Journal of Civil Engineering
Verified
Journal Article
Open access
PDF file
SASadiq Al_jilizi
Sadiq Al_jilizi
MSMay Saleh
May Saleh
AQAli R. Qassim
Ali R. Qassim
In this paper the efforts were made in the laboratory to construct a physical model and a simulated model with the help of computational fluid dynamic (CFD) techniques to provide the solutions of contaminant transport within the saturated porous media under a hydraulic structure. Brinkman equations with Forchheimer correction and species flow through porous media were considered together to describe the problem. Three categories factors were considered to be analyzed in this study. The first one is the hydraulic factors represented in the upstream water head (H). While, the second factor is the geometry of the hydraulic structures represented in the length of the base and the length of the sheet pile. The physical properties and chemical properties were the third investigated factors, in which the physical properties of the porous media include porosity and intrinsic permeability, while the chemical properties represented by the rate of generation and retardation caused by the adsorption. The physical properties have a slight effect on the concentrations because of the low flow velocity through the porous media. On the other hand, a considerable decrement on the concentrations were noticed when the rate of generation and retardation caused by adsorption was increased. Also, it was observed that the diffusion coefficient has no dramatic effect on the concentrations and contaminant moving. The results of the CFD simulated model and that of the physical model were verified with two cases for pressure head and one case for the contaminates transport. For the first case of pressure head, the maximum percentage error at five selected points was about 15% at worst point with average error of 10%. While, for the case two, the maximum percentage error is about 9% at worst one with an average error of 8%. For the simulation of the contaminates transport, reliable statistical indexes error indicted that the CFD simulated model gives a good agreement with all experimental results.

20 December 2010 in Journal of Environmental Studies
Verified
Journal Article
Closed access
PDF file
RARiadh Z. Al-Zubaidi
Riadh Z. Al-Zubaidi
RKRasul M. Khalaf
Rasul M. Khalaf
SASadiq Al_jilizi
Sadiq Al_jilizi
A physical model was designed and constructed with a scale of 1:50 to simulate Mandali Dam spillway and its approaches. Twenty six measuring were carried out with different discharges that cover the range of expected discharges. Analysis of the collected data showed that the discharge coefficient, Cd, of the spillway was 1.7 at low discharges and it was 2.05 in case of high discharges. The model showed that the relative losses of energy dissipated through the stilling basin were varied inversely with the discharge between 71.7% and 64.6%. The measurements of the three piezometers sets located on the spillway indicated that all the measured pressures along the weir surface are positive for full range of discharges. The hydraulic model confirmed that the approach flow to the spillway inlet was generally smooth and without disturbances.

1 November 2025 in Journal of Engineering and Sustainable Development
Verified
Journal Article
Open access
PDF file
SASadiq Al_jilizi
Sadiq Al_jilizi
SASanaa A. Talab Al-Osmy
Sanaa A. Talab Al-Osmy
FHFaris Hamid
Faris Hamid
ZAZainab talib Al-sharify
Zainab talib Al-sharify
Noureddine ElboughdiriNoureddine Elboughdiri
Noureddine Elboughdiri
In this work, a physical model and a Computational Fluid Dynamics simulation model in COMSOL software version 6.4 were used to simulate the two-stage transport of pollutants through porous Media. As for the physical model, it was manufactured in a laboratory to conduct practical experiments to verify two-phase flow through sandy soil. Kerosene (as a pollutant in this work) was pumped through the porous medium in different experiments at mixing ratios (100%, 85% oil to water), such that this stage represents the pollution stage. At the end of each pollution stage, the soil is washed by pumping clear water to represent the washing process. Based on standard statistical indicators, it was found that the Computational Fluid Dynamics simulation model consistently yields water-saturated ratio S1 and oil-saturated ratio S2 that are close to reality, with an acceptable error rate. This indicates the ability of Computational Fluid Dynamics models to simulate the complex two-stage pollutant transport process through porous media with high accuracy and in a short time, at lower cost and effort.