A compound parabolic concentrator (CPC) is a non-imaging device generally used in PV, thermal, or PV/thermal hybrid systems for the concentration of solar radiation on the target surface. This paper presents the geometric design, statistical modeling, parametric analysis, and geometric optimization of a two-dimensional low concentration symmetric compound parabolic concentrator for potential use in building-integrated and rooftop photovoltaic applications. The CPC was initially designed for a concentration ratio of “2×” and an acceptance half-angle of 30°. A MATLAB code was developed in-house to provoke the CPC reflector’s profile. The height, aperture width, and concentration ratios were computed for different acceptance half-angles and receiver widths. The interdependence of optical concentration ratio and acceptance half-angle was demonstrated for a wide span of acceptance half-angles. The impact of the truncation ratio on the geometric parameters was investigated to identify the optimum truncation position. The profile of truncated CPC for different truncation positions was compared with full CPC. A detailed statistical analysis was performed to analyze the synergistic effects of independent design parameters on the responses using the response surface modeling approach. A set of optimized design parameters was obtained by establishing specified optimization criteria. A 50% truncated CPC with an acceptance half-angle of 21.58° and receiver width of 193.98 mm resulted in optimum geometric dimensions.

The concentrating photovoltaic/thermal (PVT) collectors offer the benefits of the reduced per-unit price of electrical energy and co-generation of electrical and thermal energies by intensifying the solar irradiation falling on the hybrid receiving plane. The compound parabolic concentrating (CPC) collectors have appeared as a promising candidate for numerous applications in the field of solar energy due to their ability to collect both direct and diffuse solar radiation and suitability for stationary installation. Over the last few decades, various configurations of CPC collectors have been proposed and investigated by different researchers for the simultaneous generation of electrical and thermal energies. This article presents a comprehensive review of historical and recent developments and applications of CPC-based hybrid PVT systems. The review focuses on the heat extraction mechanisms and commonly used application areas of CPC-PVT systems. The innovative design configurations proposed by different researchers have been reviewed in detail. The outputs of CPC-PVT systems are generally found to be superior to their counterparts without CPCs, which justifies their increased popularity. Due to dual outputs, the hybrid CPC-PVT systems are considered to be suitable for rooftop and building façade integrated applications. Finally, future recommendations have been enlisted, highlighting the potential research opportunities and challenges for the prospective researchers working in the field of concentrating solar PVT systems.