The shift towards sustainable transportation is an urgent worldwide issue, leading to the investigation of creative methods to decrease the environmental effects of traditional vehicles. Electric vehicles (EVs) are a promising alternative, but the issue lies in establishing efficient and environmentally friendly charging infrastructure. This review explores the existing research on the subject of photovoltaic-powered electric vehicle charging stations (EVCSs). Our analysis highlights the potential for economic growth and the creation of robust and decentralized energy systems by increasing the number of EVCSs. This review summarizes the current knowledge in this field and highlights the key factors driving efforts to expand the use of PV-powered EVCSs. The findings indicate that MATLAB was predominantly used for theoretical studies, with projects focusing on shading parking lots. The energy usage varied from 0.139 to 0.295 kWh/km, while the cost of energy ranged from USD 0.0032 to 0.5645 per kWh for an on-grid system. The payback period (PBP) values are suitable for this application. The average PBP was demonstrated to range from 1 to 15 years. The findings from this assessment can guide policymakers, researchers, and industry stakeholders in shaping future advancements toward a cleaner and more sustainable transportation system.

Solar thermal energy storage improves the practicality and efficiency of solar systems for space heating by addressing the intermittent nature of solar radiation, leading to enhanced energy utilization, cost reduction, and a more sustainable and environmentally friendly approach to meeting heating needs in residential, commercial, and industrial settings. In this study, an indoor experimental setup was employed to investigate the impact of a water-based Al₂O₃ nanofluid on the storage capacity of a flat plate solar collector under varying flow rates of the heat transfer fluid. The nanofluid, introduced at specific concentrations, was incorporated into a water-contained storage tank through which the hot heat transfer fluid circulated within a heat exchanger. This process resulted in the storage of thermal energy for future applications. The research identified that the optimal flow rate of the heat transfer fluid, corresponding to the maximum storage temperature, was 15 L per hour, and the ideal nanofluid concentration, associated with the maximum specific heat capacity of the storage medium, was 0.6%. Furthermore, the introduction of nanoparticles into the storage tank led to a significant increase in the specific heat of the water, reaching a maximum of 19% from 4.18 to 5.65 kJ/(kg·°C).

This chapter describes different available technologies to provide the cooling effect by utilizing solar energy for both thermal and photovoltaic ways. Moreover, this chapter highlights the following points: (i) the main attributes for different solar cooling technologies to recognize the main advantages, challenges, disadvantages, and feasibility analysis; (ii) the need for further research to reduce solar cooling chiller manufacture costs and improve its performance; (iii) it provides useful information for decision-makers to select the proper solar cooling technology for specific application. Furthermore, some references, which include investigation results, will be included. A conclusion about the main gained investigation results will summarize the investigation results and the perspectives of such technologies.

The conventional unidirectional power flow model of centralized energy grids is being revolutionized by integrating renewable energy sources, particularly photovoltaic (PV) systems, to meet the escalating demand for electricity while ensuring sustainability. However, this integration challenges the efficiency and performance of power systems and impacts various parameters, including power quality, voltage profile, power factor, power loss, and load flow. This paper investigates the effects and performance of a grid-tied PV system integrated into the conventional power system, focusing on the Palestine Polytechnic University (PPU) 230 kWp PV plant as a real-world case study. Simulations conducted using ETAP software revealed that integrating the PV system resulted in a slight increase in the voltage level at the main bus of the PPU feeder, with an increase of 0.03% at the medium-voltage level. Additionally, the voltage level at the Point of Common Coupling (PCC) increased by 0.51% with a PV penetration level of only 14.7%, which remains within the acceptable range according to IEEE 1547 standards. These findings underscore the minimal impact of the PV system on the voltage profile and highlight the system’s ability to maintain power quality and efficiency even with the addition of renewable energy sources. The daily load profiles were studied with and without the PV system, providing a comprehensive analysis of its effects on the grid.

PV power prediction is vital for efficient and effective solar energy utilization within the energy ecosystem. It enables grid stability, cost savings, and the seamless integration of solar power into the broader energy infrastructure. In this work, previously obtained data on the estimation of...