Electricity can be provided to small-scale communities like commercial areas and villages through microgrid, one of the small-scale, advanced, and independent electricity systems out of the grid. Microgrid is an appropriate choice for specific purposes reducing emission and generation cost and increasing efficiency, reliability, and the utilization of renewable energy sources. The main objective of this paper is to elucidate the combined economic emission dispatch CEED problem in the microgrid to attain optimal generation cost. A combined cost optimization approach is examined to minimize operational cost and emission levels while satisfying the load demand of the microgrid. With this background, the authors proposed a novel improved mayfly algorithm incorporating Levy flight to resolve the combined economic emission dispatch problem encountered in microgrids. The islanded mode microgrid test system considered in this study comprises thermal power, solar-powered, and wind power generating units. The simulation results were considered for 24 hours with varying power demands. The minimization of total cost and emission is attained for four different scenarios. Optimization results obtained for all scenarios using IMA give a comparatively better reduction in system cost than MA and other optimization algorithms considered revealing the efficacy of IMA taken for comparison with the same data. The proposed IMA algorithm can solve the CEED problem in a grid-connected microgrid.

This study presents the Enhanced Cheetah Optimizer Algorithm (ECOA) designed to tackle the intricate real-world challenges of dynamic economic dispatch (DED). These complexities encompass demand-side management (DSM), integration of non-conventional energy sources, and the utilization of pumped-storage hydroelectric units. Acknowledging the variability of solar and wind energy sources and the existence of a pumped-storage hydroelectric system, this study integrates a solar-wind-thermal energy system. The DSM program not only enhances power grid security but also lowers operational costs. The research addresses the DED problem with and without DSM implementation to analyze its impact. Demonstrating effectiveness on two test systems, the suggested method's efficacy is showcased. The recommended method's simulation results have been compared to those obtained using Cheetah Optimizer Algorithm (COA) and Grey Wolf Optimizer. The optimization results indicate that, for both the 10-unit and 20-unit systems, the proposed ECOA algorithm achieves savings of 0.24% and 0.43%, respectively, in operation costs when Dynamic Economic Dispatch is conducted with Demand-Side Management (DSM). This underscores the advantageous capability of DSM in minimizing costs and enhancing the economic efficiency of the power systems. Our ECOA has greater adaptability and reliability, making it a promising solution for addressing multi-objective energy management difficulties within microgrids, particularly when demand response mechanisms are incorporated. Furthermore, the suggested ECOA has the ability to elucidate the multi-objective dynamic optimal power flow problem in IEEE standard test systems, particularly when electric vehicles and renewable energy sources are integrated.

Optimal energy management has become a challenging task to accomplish in today’s advanced energy systems. If energy is managed in the most optimal manner, tremendous societal benefits can be achieved such as improved economy and less environmental pollution. It is possible to operate the microgrids under grid-connected, as well as isolated modes. The authors presented a new optimization algorithm, i.e., Oppositional Gradient-based Grey Wolf Optimizer (OGGWO) in the current study to elucidate the optimal operation in microgrids that is loaded with sustainable, as well as unsustainable energy sources. With the integration of non-Renewable Energy Sources (RES) with microgrids, environmental pollution is reduced. The current study proposes this hybrid algorithm to avoid stagnation and achieve premature convergence. Having been strategized as a bi-objective optimization problem, the ultimate aim of this model’s optimal operation is to cut the costs incurred upon operations and reduce the emission of pollutants in a 24-h scheduling period. In the current study, the authors considered a Micro Turbine (MT) followed by a Wind Turbine (WT), a battery unit and a Fuel Cell (FC) as storage devices. The microgrid was assumed under the grid-connected mode. The authors validated the proposed algorithm upon three different scenarios to establish the former’s efficiency and efficacy. In addition to these, the optimization results attained from the proposed technique were also compared with that of the results from techniques implemented earlier. According to the outcomes, it can be inferred that the presented OGGWO approach outperformed other methods in terms of cost mitigation and pollution reduction.

The use of plug-in hybrid electric vehicles (PHEVs) provides a way to address energy and environmental issues. Integrating a large number of PHEVs with advanced control and storage capabilities can enhance the flexibility of the distribution grid. This study proposes an innovative energy management strategy (EMS) using an Iterative map-based self-adaptive crystal structure algorithm (SaCryStAl) specifically designed for microgrids with renewable energy sources (RESs) and PHEVs. The goal is to optimize multi-objective scheduling for a microgrid with wind turbines, micro-turbines, fuel cells, solar photovoltaic systems, and batteries to balance power and store excess energy. The aim is to minimize microgrid operating costs while considering environmental impacts. The optimization problem is framed as a multi-objective problem with nonlinear constraints, using fuzzy logic to aid decision-making. In the first scenario, the microgrid is optimized with all RESs installed within predetermined boundaries, in addition to grid connection. In the second scenario, the microgrid operates with a wind turbine at rated power. The third case study involves integrating plug-in hybrid electric vehicles (PHEVs) into the microgrid in three charging modes: coordinated, smart, and uncoordinated, utilizing standard and rated RES power. The SaCryStAl algorithm showed superior performance in operation cost, emissions, and execution time compared to traditional CryStAl and other recent optimization methods. The proposed SaCryStAl algorithm achieved optimal solutions in the first scenario for cost and emissions at 177.29 €ct and 469.92 kg, respectively, within a reasonable time frame. In the second scenario, it yielded optimal cost and emissions values of 112.02 €ct and 196.15 kg, respectively. Lastly, in the third scenario, the SaCryStAl algorithm achieves optimal cost values of 319.9301 €ct, 160.9827 €ct and 128.2815 €ct for uncoordinated charging, coordinated charging and smart charging modes respectively. Optimization results reveal that the proposed SaCryStAl outperformed other evolutionary optimization algorithms, such as differential evolution, CryStAl, Grey Wolf Optimizer, particle swarm optimization, and genetic algorithm, as confirmed through test cases.

This paper deals with the problem of the optimal selection of capacitor banks in electrical AC distribution systems for minimizing the costs of energy losses during a year of operation through a discrete version of the vortex search algorithm (DVSA). This algorithm works with a hypersphere with a variable radius defined by an exponential function where a Gaussian distribution is used to generate a set of candidate solutions uniformly distributed around the center of this hypersphere. This center corresponds to the best solution obtained at the iteration t, which is initialized at the center of the solution space at the iterative search beginning. The main advantage of combining the exponential function with the Gaussian distribution is the correct balance between the exploration and exploitation of the solution space, which allows reaching the global optimal solution of the optimization problem with a low standard deviation, i.e., guaranteeing repeatability at each simulation. Two classical distribution networks composed of 33 and 69 nodes were used to validate the proposed DVSA algorithm. They demonstrated that the DVSA improves numerical reports found in specialized literature regarding the optimal selection and location of fixed-step capacitor banks with a low computational burden. All the simulations were carried out in MATLAB software.