Lignin, the most abundant aromatic polymer in nature, plays a critical role in lignocellulosic biomasses by providing structural support. However, its presence complicates the industrial exploitation of these materials for biofuels, paper production and other high-value compounds. Annually, the industrial extraction of lignin reaches an estimated 225 million tons, yet only a fraction is recovered for reuse, with most incinerated as low-value fuel. The growing interest in lignin potential has sparked research into sustainable recovery methods from lignocellulosic agro-industrial wastes. This review examines the chemical, physical and physicochemical processes for isolating lignin, focusing on innovative, sustainable technologies that align with the principles of a circular economy. Key challenges include lignin structural complexity and heterogeneity, which hinder its efficient extraction and application. Nonetheless, its properties such as high thermal stability, biodegradability and abundant carbon content place lignin as a promising material for diverse industrial applications, including chemical synthesis and energy generation. A structured analysis of advancements in lignin extraction, characterization and valorization offers insights into transforming this undervalued by-product into a vital resource, reducing reliance on non-renewable materials while addressing environmental sustainability.
One of the primary targets for the new lignocellulosic feedstock-based biorefinery is the simultaneous valorization of holocellulose and lignin. Acidified organosolv treatment is among the most promising strategy for recovering technical lignin, water-soluble hemicellulose, and cellulose pulp with increased accessibility to hydrolytic enzymes. In this work, a design-of-experiment (DoE) approach was used to increase the cellulose recovery, digestibility, and the delignification of Cynara cardunculus L. feedstock. In the first treatment, the milled biomass was subjected to microwave-assisted extraction using an acidified GVL/water mixture to separate lignin and hemicellulose from cellulose. In the second treatment, the cellulose pulp was hydrolyzed by cellulolytic enzymes to demonstrate the enhanced digestibility. At the optimal condition (154 °C, 2.24% H2SO4, and 0.62 GVL/water ratio), the cellulose pulp showed a cellulose content of 87.59%, while the lignin content was lower than 8%. The cellulose recovery and digestibility were equal to 79.46% and 86.94%, respectively. About 40% of the initial hemicellulose was recovered as monosaccharides. This study demonstrated the effectiveness of the two-step organosolv treatment for biomass fractionation; however, as suggested by DoE analysis, a confirmative study at a low temperature (<154 °C) should be performed to further increase the cellulose recovery.
Lignocellulosic biomass is a nonedible matrix that can be efficiently exploited as feedstock in an integrated biorefinery after a proper pretreatment. An organosolv pretreatment using an acidified γ-valerolactone (GVL)/water solution was proposed to improve the cellulose enrichment and enzymatic saccharification of cardoon (Cynara cardunculus L.) stems. At the optimal pretreatment condition (140 °C, 0.6 GVL/water, and 2.24% H2SO4), xylan was efficiently removed from the cardoon, and up to 50% of its content was recovered in the aqueous fraction, while 86% of the cellulose was retained in the solid fraction. The resulting cardoon pulp showed a cellulose content of 91.5% and an enzymatic digestibility of 100%. An overall glucose production of 37.17 g/100 g raw material (90% theoretical maximum) was obtained using high solid loading (20% w/w) and a high enzyme dosage (60 FPU/g cellulose). At a low enzyme dosage, glucose concentrations of 169 g/L and 210 g/L were achieved using 10 FPU/g cellulose and 20 FPU/g cellulose, respectively. Therefore, an organosolv pretreatment can be an effective process for producing cellulose-enriched pulp with enhanced enzymatic digestibility from cardoon stems, providing a promising option for green lignocellulosic biorefineries that aim to produce high concentrations of glucose with low cellulase addition.
Reducing the carbon footprint of energy production is one of the most pressing challenges facing humanity today. Lignocellulosic biomass residues from fruit production industries show promise as a viable energy source. This paper presents a study of the Italian context concerning the utilization of orchard lignocellulosic residues for energy production as electricity or bioethanol. The potential of various orchard residues was assessed through chemical and physical analyses, and an equivalent electrical energy of about 6441.62 GWh or an amount of 0.48 Mt/y of bioethanol was obtained based on the average annual dry residue mass availability of about 3.04 Mt/y. These data represent 9.30% of the national electrical energy production from renewable sources, as well as 6.21% of the Italian demand for gasoline in 2022. Electricity generation from these residues has shown its potential as a reliable and sustainable baseload power source, as well as a source of renewable transportation fuel. The studied process could be a valuable reference to expand these concepts on a global scale to achieve a greener and more sustainable energy future.
The lipogenic ability of the yeast Solicoccozyma terricola DBVPG 5870 grown on hydrolyzed lignocellulose obtained from cardoon stalks was evaluated. Data on cell biomass, lipid production, and fatty acid profiles of triacylglycerols obtained in batch and fed-batch experiments were carried out at the laboratory scale in a 5L fermenter, and at two different temperatures (20 and 25 °C) were reported. The higher production of total intracellular lipids (13.81 g/L) was found in the fed-batch experiments carried out at 20 °C. S. terricola exhibited the ability to produce high amounts of triacylglycerol (TAGs) with a characteristic fatty acids profile close to that of palm oil. The TAGs obtained from S. terricola grown on pre-treated lignocellulose could be proposed as a supplementary source of oleochemicals. Indeed, due to the rising prices of fossil fuels and because of the environmental-related issues linked to their employment, the use of TAGs produced by S. terricola grown on lignocellulose could represent a promising option as a supplementary oleochemical, especially for biodiesel production.
Research studies for cellulose recovery from lignocellulosic materials are essential in order to propose sustainable alternatives to harness residual biomasses, solving problems caused by their abundance and inadequate use. In this study, olive-tree pruning biomass has been subjected to different pretreatments with different organosolvents (acetone, ethanol, and -valerolactone) with microwave radiation assistance. The effect of operating parameters has been studied, considering specific ranges of variables values according to each experimental design but, in any case, located in the ranges of 33–67% (chemical compound concentration), 130–170 °C (temperature), 5–30 min (reaction time), and 1/20–1/5 (solid/liquid ratio, s/L). Based on the R2 and R2adj values (mostly above 0.97), the experimental data were adequately adjusted to four selected response variables: post-solids cellulose and lignin content apart from removal percentages of both structural components. The optimization process resulted in post-treatment solids with meaningful cellulose yields (higher than 84.7%) and reduced lignin content (lower than 4.2%). The best results were obtained using 66.5% acetone (155 °C, 8.4 min and s/L = 1/19), involving greater material deconstruction, a high percentage of delignification (96.7%), not very significant cellulose loss (29.4%), and a post-treatment solid consisting almost exclusively of cellulose (≈99%).