Xiangying Miao

Dr. Xiangying Miao

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 August 2022 in IEEE Geoscience and Remote Sensing Letters
Verified
Journal Article
Closed access
XMXiangying Miao
Xiangying Miao
JWJing Wang
Jing Wang
PMPeng Mao
Peng Mao
HMHongli Miao
Hongli Miao
The Interferometric Imaging Radar Altimeter (InIRA) carried on the Tiangong-2 Space Laboratory can observe three-dimensional sea surface topography over a swath tens of kilometers wide. The InIRA represents a test mission that will provide valuable experience for the design and data processing technology of future wide-swath altimeters. In addition to the tropospheric delay, ionospheric delay, and sea state bias (SSB) that affect traditional altimeters, InIRA was affected by the cross-track error derived from roll error, baseline length error, and interference phase error, which had to be properly corrected. In this letter, range error correction based on correction models and cross-track error correction based on the reference topography data (RTD) method were applied to a 15-day InIRA dataset and evaluated using the Jason-2, Jason-3, Saral/AltiKa, and Sentinel-3A. The results showed that the standard deviation (STD) between corrected InIRA and the combined dataset was 7.96 cm after eliminating the influence of tides and dynamic atmospheric correction (DAC), which was comparable to nadir altimeter measurement accuracy.

17 December 2018 in PLOS ONE
Verified
Journal Article
Open access
PDF file
XMXiangying Miao
Xiangying Miao
HMHongli Miao
Hongli Miao
YJYongjun Jia
Yongjun Jia
YGYingting Guo
Yingting Guo
This paper constructed a stacked-autoencoder neural network model (SAE model) to estimate sea state bias (SSB) based on radar altimeter data. Six cycles of the geophysical data record (GDR) from Jason-1/2 radar altimeters were used as a training dataset, and the other 2 cycles of the GDR from Jason-1/2 were used for testing. The inputs to this SAE model include the significant wave height (SWH), wind speed (U), sea surface height (SSH), backscatter coefficient (σ0) and automatic gain control (AGC), and the model outputs the SSB. The model includes one input layer, three hidden layers and one output layer. The SSBs in the GDR of Jason-1/2 were obtained from a nonparametric model based on the SWH and U as input variables; thus, the model has high accuracy but low efficiency. The SSBs in the GDR of HY-2A were computed using a four-parameter parametric model that uses the SWH and U as input variables; therefore, this model’s computational speed is high but its accuracy is low. Thus, we used the HY-2A radar altimeter as an unseen validation dataset to evaluate the performance of the SAE model. Then, we analyzed the contrasting results of these methods, including the differences in the SSB, explained variance, residual error and operational efficiency. The results demonstrate not only that the accuracy of the SAE model is superior to that of the conventional parametric model but also that its operational efficiency is better than that of the nonparametric model.

30 September 2022 in IEEE Transactions on Geoscience and Remote Sensing
Verified
Journal Article
Closed access
XMXiangying Miao
Xiangying Miao
JWJing Wang
Jing Wang
ZYZhonghao Yang
Zhonghao Yang
PMPeng Mao
Peng Mao
HMHongli Miao
Hongli Miao
Wet troposphere path delay (WPD) is a crucial error source for wide-swath altimeters with high-resolution observations. This study generated a simulated wide-swath through the nadir microwave radiometer (MWR) track and evaluated four wide-swath wet tropospheric correction (WTC) methods based on multisource data from 2017 with strict spacetime windows. The numerical weather model (NWM) method can provide a basic correction for the wide-swath altimeter. The MWR method, based on the extension of nadir one-beam MWR, could not provide a reliable correction. The residual error increased rapidly after deviating from the nadir profile. The overall root-mean-square error (RMSE) of the combination method was approximately 0.58 cm and had high uniformity within the swath. Even at the far end of the swath, the correction was better than that on the NWM and MWR methods. The objective analysis (OA) method using linear spatiotemporal OA had the best result among the four correction methods. The overall RMSE was only 0.49 cm, which was 34% lower than the NWM method. High consistency was maintained at each cross-track position of the swath. The last two wide-swath WTC methods provided in this study had high performance. For the wide-swath altimeter, the combination method is a scheme worthy of consideration, as it can provide WTC results conveniently, quickly, and accurately. Although the operation of the OA method is complex and depends on multisource observation data, it promises to be a high-quality scheme for the wide-swath altimeter WTC when a more accurate WTC value is required.

8 October 2025 in Remote Sensing
Verified
Journal Article
Open access
PDF file
JCJiabao Chen
Jiabao Chen
XMXiangying Miao
Xiangying Miao
Yong WanYong Wan
Yong Wan
JZJiahui Zhang
Jiahui Zhang
HMHongli Miao
Hongli Miao
This study investigates the effects of multi-angle along-track interferometric synthetic aperture radar (ATI-SAR) observations on the accuracy of sea surface current retrieval. Utilizing a high-fidelity, full-link SAR ocean simulator, this study systematically assesses the influence of three key factors—the angle between observation directions, the relative orientation of wind and current, and wind speed—on the precision of two-dimensional (2D) current vector retrievals. Results demonstrate that observation geometry is a dominant factor: retrieval errors are minimized when the two viewing directions are near-orthogonal (~90°), while near-parallel (0° or 180°) geometries result in significant error amplification. Furthermore, the angle between wind and current introduces complex, non-linear error characteristics, with a perpendicular alignment minimizing velocity error but maximizing direction error. Higher wind speeds are found to degrade both velocity and direction retrieval accuracy. Collectively, these findings provide crucial quantitative guidance for optimizing the mission design, observation planning, and algorithm development for future multi-angle ATI-SAR satellite constellations dedicated to ocean current monitoring.

1 April 2024 in IEEE Geoscience and Remote Sensing Letters
Verified
Journal Article
Closed access
XMXiangying Miao
Xiangying Miao
Yong WanYong Wan
Yong Wan
HMHongli Miao
Hongli Miao
JZJie Zhang
Jie Zhang
Satellite altimeters require correction for tropospheric delay to precisely measure sea surface heights. Wide-swath altimeters, operating near-nadir, experience a slowdown in microwave signals and slight path bending due to changes in the atmospheric refractive index. The continued fraction-based Global Navigation Satellite System (GNSS) mapping function, originally designed for low-elevation-angle GNSS observations, inadequately addresses the challenges faced by wide-swath altimeters at very high elevation angles. Additionally, it necessitates time-and-location-specific calculations based on numerical weather models, limiting its effectiveness in offline applications. This letter introduces a novel atmospheric delay mapping function specifically developed for wide-swath altimeters with incident angles below 10°. Utilizing the European Centre for Medium-Range Weather Forecasts (ECMWF)’s stratified atmospheric pressure data and the ray-tracing method, this function improves accuracy by supplementing a first-order trigonometric function with remainders. This approach markedly reduces model errors from the millimeter-to-centimeter scale down to the sub-millimeter-to-millimeter scale. This new mapping function, dependent on elevation angle, allows for direct projection in the slant-range direction once the zenith delay is determined, thereby significantly simplifying its application.

9 May 2023 in Remote Sensing
Verified
Journal Article
Open access
PDF file
XMXiangying Miao
Xiangying Miao
LLLei Liu
Lei Liu
HMHongli Miao
Hongli Miao
ZYZhonghao Yang
Zhonghao Yang
JWJing Wang
Jing Wang
QZQingjun Zhang
Qingjun Zhang
The baseline error is a primary error source of the wide-swath altimeter, directly related to the cross-track distance, and can lead to serious height errors at the swath’s outer edge. Cross-calibration using discrepancies with reference data can effectively estimate and correct the baseline error. However, building a reference surface that accurately describes the sea surface at the observation time is necessary to use this cross-correction method. The dynamic ocean environments where the sea surface structure changes over time are challenging. This paper proposes a method for constructing reference topography data (RTD) based on multi-source data products to correct the baseline error of the wide-swath altimeter. The effectiveness of the proposed method is evaluated using HYCOM ocean model data to assess the timeliness of the baseline error correction. The results demonstrate that using RTD at the observation time of the wide-swath altimeter can significantly correct the baseline error. The RMSE of the corrected sea surface height (SSH) in different regions is typically between 1~2 cm, except in some regions with strong currents where the RMSE is approximately 3~4 cm. However, the time interval between the RTD and the observation time of the wide-swath altimeter can affect the accuracy of the baseline error correction. The timeliness of this correction is influenced by the variability of SSH in different regions. In regions with relatively slow SSH changes near the equator, the effective time based on HYRTD and MORTD can basically reach more than 7 days. In regions where the SSH changes more rapidly, the correction result may no longer be reliable in only 1~3 days.