In this review paper, several new approaches about the 3C-SiC growth are been presented. In fact, despite the long research activity on 3C-SiC, no devices with good electrical characteristics have been obtained due to the high defect density and high level of stress. To overcome these problems, two different approaches have been used in the last years. From one side, several compliance substrates have been used to try to reduce both the defects and stress, while from another side, the first bulk growth has been performed to try to improve the quality of this material with respect to the heteroepitaxial one. From all these studies, a new understanding of the material defects has been obtained, as well as regarding all the interactions between defects and several growth parameters. This new knowledge will be the basis to solve the main issue of the 3C-SiC growth and reach the goal to obtain a material with low defects and low stress that would allow for realizing devices with extremely interesting characteristics.
An important issue in the technology of cubic SiC (3C–SiC) material for electronic device applications is to understand the behavior of extended defects such as partial dislocation complexes and stacking faults (SFs). Atomistic simulations using molecular dynamics (MD) are an efficient tool to tackle this issue for large systems at comparatively low computation cost. At this, proper choice of MD potential is imperative to ensure the reliability of the simulation predictions. In this work, we compare the evolution of extended defects in 3C–SiC obtained by MD simulations with Tersoff, analytical bond order, and Vashishta potentials. Key aspects of this evolution are considered including the dissociation of 60° perfect dislocations in pairs of 30° and 90° partials as well as the dependence of the partial dislocation velocity on the Burgers vector and the atomic composition of core. Tersoff potential has been found to be less appropriate in describing the dislocation behavior in 3C–SiC as compared to two other potentials, which in their turn provide qualitatively equivalent predictions. The Vashishta potential predicts much faster defect dynamics than the analytical bond order potential (ABOP). It can be applied therefore to describe the large-scale evolution of the dislocation systems and SFs. On the other hand, ABOP is more precise in predicting local atom arrangements and reconstructions of the dislocation core structures. In this respect, synergetic use of ABOP and Vashishta potential is suggested for the MD simulation study of the properties and evolution of extended defects in the 3C–SiC.
In this work, the structure and stability of partial dislocation (PD) complexes terminating double and triple stacking faults in 3C-SiC are studied by molecular dynamics simulations. The stability of PD complexes is demonstrated to depend primarily on the mutual orientations of the Burgers vectors of constituent partial dislocations. The existence of stable complexes consisting of two and three partial dislocations is established. In particular, two types of stable double (or extrinsic) dislocation complexes are revealed formed by two 30° partial dislocations with different orientations of Burgers vectors, or 30° and 90° partial dislocations. Stable triple PD complexes consist of two 30° partial dislocations with different orientations of their Burgers vectors and one 90° partial dislocation, and have a total Burgers vector that is equal to zero. Results of the simulations agree with experimental observations of the stable PD complexes forming incoherent boundaries of twin regions and polytype inclusions in 3C-SiC films.
Multilayered SiOx/SiO2 and SiOxNy/SiO2 thin films were fabricated using different techniques and subsequently annealed at high temperatures (≥1100 °C) in order to form Si nanocrystals by means of the well-known superlattice approach. The thickness of the SiOx and SiOxNy layers was varied from 1.5 to 5 nm, while for the SiO2 layers it was fixed at 4 nm. Using transmission electron microscopy, we showed that the multilayered structure generally sustains the high temperature annealing for both types of films. However, for samples with ultrathin SiOx or SiOxNy layers a breakdown of the superlattice structure and a complete intermixing of layers were observed at high temperatures. On the contrary, annealing at lower temperature (900 °C) preserves the multilayered structure even of such samples. Theoretical calculations showed that the intermixing of SiOx/SiO2 and SiOxNy/SiO2 superlattices in the ultrathin layers thickness limit may be explained thermodynamically by the gain in the Gibbs free energy, which depends in turn on the annealing temperature.