In this paper, we propose dual mode simultaneous wireless information and power transfer (SWIPT) system with deep learning based adaptive mode switching (MS) algorithm to exploit both advantages of single tone and multi-tone SWIPT. For self-powering of low-energy Internet-of-Things (IoT) devices, a duty-cycling operation is used with nonlinear energy harvesting. For this, we employ a new energy-assisted single tone modulation which simplifies the receiver structure for information decoding. Considering the symbol-error rate performance, we formulate an adaptive MS problem to maximize the achievable rate under the energy-causality constraint by adjusting the MS threshold. To relieve the computational burden of the receiver, we introduce asymmetric processing for adaptive MS, for which the transmitter adapts the communication mode based on the feedback from the receiver. We invoke deep learning for adaptive MS at the transmitter that iteratively updates the MS threshold in long-term scale via deep long short-term memory (LSTM) recurrent neural network (RNN), while deciding on the communication mode and modulation index in short-term scale. We demonstrate the achievable rate improvement under energy neutral operation while providing interesting insights in designing the adaptive MS algorithm for the dual mode SWIPT system.
7 December 2020 in IEEE Wireless Communications Letters
We study how the nonlinearity of the high power amplifier (HPA) affects multi-tone simultaneous wireless information and power transfer (SWIPT). Considering the nonlinear HPA model, we analyze the symbol-error rate performance of the peak-to-average power ratio (PAPR) modulation for the multi-tone SWIPT. Numerical results demonstrate that the HPA has a significant impact on both energy harvesting and information decoding while providing insights which is important to take into account the nonlinearity of the HPA when evaluating the end-to-end efficiency of the multi-tone SWIPT.
In this article, we propose a unified simultaneous wireless information and power transfer (SWIPT) signaling and architecture to take advantage of both single tone and multitone signaling by adjusting only the power allocation ratio of a unified signal. Toward this, we design a unified and integrated receiver architecture for the proposed unified SWIPT signaling via an envelope detection with low power consumption. To lower the computational complexity of the receiver, we propose an adaptive control algorithm where the transmitter adjusts the communication mode through temporal convolutional network (TCN)-based asymmetric processing . To this end, the transmitter optimizes the modulation index and power allocation ratio in short-term scale while updating the mode switching threshold in long-term scale. We demonstrate that the proposed unified SWIPT system improves the achievable rate under the self-powering condition at low-power Internet of Things (IoT) devices. Consequently we will facilitate the effective deployment of low-power IoT networks that concurrently supply both information and energy wirelessly to the devices by using the proposed unified SWIPT and adaptive control algorithm at the transmitter side.
We propose a heterogeneously reconfigurable energy harvester which contains multiple energy harvesting (EH) blocks, each comprised of multiple EH circuits in parallel to be optimized for different input power range. Practical EH circuits have their own favorable input power range due to turn-on sensitivity and saturation effects. To account for this, we present the necessary conditions for efficient configuration of an energy harvester, and then propose an algorithm for optimal reconfiguration of the energy harvester. Further, adaptive time switching and mode switching problems are formulated in order to maximize the average achievable rate under the self-powering condition. Our proposed energy harvester and algorithm can be applied to low-power Internet-of-Things (IoT) devices with wireless EH capability for self-sustainability, which will be a key enabler for realizing battery-free IoT network.
In this paper, a Radio Frequency (RF) energy harvester (EH) system for Internet of Things (IoT)-related applications is presented. The proposed EH architecture operates at 5.2 GHz band and utilizes multiple rectenna. This approach enhances the efficiency of the whole system over a wide dynamic RF input range. In the presented circuit, configuration of the rectenna is controlled by Field-Programmable Gate Array (FPGA) with respect to the input power level of the received RF input signal. In addition, an automatic adaptive matching based on the configuration of the rectenna, level of the received signal, and load current adjusts the matching network. The rectenna is realized through the Radio Frequency-Direct Current (RF-DC) converter composed of two Schottky diodes and generates the output DC voltage. Finally, a buck-boost converter provides the flattened and fixed voltage for the IoT and wearable devices. The 5.2 GHz band reconfigurable system demonstrates 67% high efficiency and 6.1 V output DC voltage where the power level of RF input is +20 dBm. The main application of the proposed structure is for charging wearable smart devices such as a smart watch and bracelet.