The surface of metal parts operating at high temperature in energy production and aerospace industry is typically exposed to thermal stresses and oxidation phenomena. To this aim, plasma spraying was employed to deposit NiCoCrAlYRe coatings on metal substrates. The effects of early-stage oxidation, at ~1100 °C, on their microstructure were investigated. The partial infiltration of oxygen through some open pores and microcracks embedded in coating microstructure locally assistedthe formation of a stable Al2O3 scale at the splat boundary, while the diffusion of Cr and Ni and the following growth of Cr2O3, Ni(Cr,Al)2O4 and NiO were restricted to Al depleted isolated areas. At the same time, a continuous, dense and well adherent Al2O3 layer grew on the top-surface, and was somewhere supported by a thin mixed oxide scale mainly composed of Cr2O3 and spinels. Based on these results, the addition of Re to the NiCoCrAlY alloy is able to enhance the oxidation resistance.
Microstructural analysis by electron microscopy techniques is a powerful tool for determining the basic and functional properties of materials and their relationship with the processing parameters, thus giving useful keys to designers and producers for optimizing performance and durability of the related components. Materials and coatings produced by thermal spraying of powder-based raw materials exhibit unique physical, thermal and mechanical properties, resulting from the thermal effects associated to their processing. These properties can be tailored depending on the application the components are addressed to. Moreover, they can change during operation because of any aging mechanisms promoted by oxidation, corrosion, thermal exposure and wear, that can be responsible of reduced performance, degradation and damage, thus affecting their durability and service lifetime. In this work, the potentiality of scanning electron microscopy (SEM) is investigated with the purpose to analyze in detail the complex microstructure and some aging effects in metallic, ceramic and composite coatings, such as formation of oxide scales, grain growth, sintering, and so on. The analysis can be successfully expanded to a wide variety of materials as well as to the study of complex mechanisms of degradation occurring during service
14 August 2014 in Metallurgical and Materials Transactions A