Periodic structures with a sub‐wavelength pitch have been known since Hertz conducted his first experiments on the polarization of electromagnetic waves. While the use of these structures in waveguide optics was proposed in the 1990s, it has been with the more recent developments of silicon photonics and high‐precision lithography techniques that sub‐wavelength structures have found widespread application in the field of photonics. This review first provides an introduction to the physics of sub‐wavelength structures. An overview of the applications of sub‐wavelength structures is then given including: anti‐reflective coatings, polarization rotators, high‐efficiency fiber–chip couplers, spectrometers, high‐reflectivity mirrors, athermal waveguides, multimode interference couplers, and dispersion engineered, ultra‐broadband waveguide couplers among others. Particular attention is paid to providing insight into the design strategies for these devices. The concluding remarks provide an outlook on the future development of sub‐wavelength structures and their impact in photonics. image

We propose a silicon waveguide-fiber grating coupler that uses a subwavelength microstructure to achieve a continuously variable grating strength yet can be fabricated using only a single etch step. By adjusting the subwavelength microstructure at every point along the grating, the grating coupler can be optimized to give high field overlap with the optical fiber mode and also minimize backreflections along the incident waveguide path. Our design example is optimized for quasi-TM mode in a silicon photonic-wire waveguide, as required for waveguide evanescent-field-sensing applications. A field overlap of up to 94% with a standard single-mode optical fiber (SMF-28) is achieved by coupler apodization. Backreflection from the grating is reduced to $\sim 0.1\%$, and the total predicted photonic wire to fiber coupling efficiency is 50%.

Nanophotonic beamsplitters are fundamental building blocks in integrated optics, with applications ranging from high speed telecom receivers to biological sensors and quantum splitters. While high‐performance multiport beamsplitters have been demonstrated in several material platforms using multimode interference couplers, their operation bandwidth remains fundamentally limited. Here, we leverage the inherent anisotropy and dispersion of a sub‐wavelength structured photonic metamaterial to demonstrate ultra‐broadband integrated beamsplitting. Our device, which is three times more compact than its conventional counterpart, can achieve high‐performance operation over an unprecedented 500 nm design bandwidth exceeding all optical communication bands combined, and making it one of the most broadband silicon photonics components reported to date. Our demonstration paves the way toward nanophotonic waveguide components with ultra‐broadband operation for next generation integrated photonic systems. image

We explore, to the best of our knowledge, the potential of diffractionless subwavelength grating waveguides for sensing applications. We show that by subwavelength patterning of silicon-wire waveguides the field delocalization can be engineered to increase the sensitivity. Fully vectorial 3D-FDTD simulations confirm the sensitivity enhancement, achieving sensitivities of $0.83\mathrm{RIU}/\mathrm{RIU}$ and $1.5·{10}^{-3}\mathrm{RIU}/\mathrm{nm}$ for bulk and surface sensing, respectively, which compare favorably to state-of-the-art sensing waveguides.

Fiber-chip edge couplers are extensively used in integrated optics for coupling of light between planar waveguide circuits and optical fibers. In this work, we report on a new fiber-chip edge coupler concept with large mode size for silicon photonic wire waveguides. The coupler allows direct coupling with conventional cleaved optical fibers with large mode size while circumventing the need for lensed fibers. The coupler is designed for 220 nm silicon-on-insulator (SOI) platform. It exhibits an overall coupling efficiency exceeding 90%, as independently confirmed by 3D Finite-Difference Time-Domain (FDTD) and fully vectorial 3D Eigenmode Expansion (EME) calculations. We present two specific coupler designs, namely for a high numerical aperture single mode optical fiber with 6 µm mode field diameter (MFD) and a standard SMF-28 fiber with 10.4 µm MFD. An important advantage of our coupler concept is the ability to expand the mode at the chip edge without leading to high substrate leakage losses through buried oxide (BOX), which in our design is set to 3 µm. This remarkable feature is achieved by implementing in the SiO₂ upper cladding thin high-index Si₃N₄ layers. The Si₃N₄ layers increase the effective refractive index of the upper cladding near the facet. The index is controlled along the taper by subwavelength refractive index engineering to facilitate adiabatic mode transformation to the silicon wire waveguide while the Si-wire waveguide is inversely tapered along the coupler. The mode overlap optimization at the chip facet is carried out with a full vectorial mode solver. The mode transformation along the coupler is studied using 3D-FDTD simulations and with fully-vectorial 3D-EME calculations. The couplers are optimized for operating with transverse electric (TE) polarization and the operating wavelength is centered at 1.55 µm.

We propose an ultra-broadband multimode interference (MMI) coupler with a wavelength range exceeding the O, E, S, C, L and U optical communication bands. For the first time, the dispersion property of the MMI section is engineered using a subwavelength grating structure to mitigate wavelength dependence of the device. We present a 2 × 2 MMI design with a bandwidth of 450nm, an almost fivefold enhancement compared to conventional designs, maintaining insertion loss, power imbalance and MMI phase deviation below 1dB, 0.6dB and 3°, respectively. The design is performed using an in-house tool based on the 2D Fourier Eigenmode Expansion Method (F-EEM) and verified with a 3D Finite Difference Time Domain (FDTD) simulator.