Qilin Mei

Prof. Qilin Mei

orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 June 2022 in Nanomaterials
Verified
Journal Article
Open access
PDF file
QMQilin Mei
Qilin Mei
HXHan Xiao
Han Xiao
GDGuomin Ding
Guomin Ding
HLHuizhi Liu
Huizhi Liu
CZChenglong Zhao
Chenglong Zhao
ZHZhixiong Huang
Zhixiong Huang
Development of high-performance graphene-based microwave absorbing materials with low density and strong absorption is of great significance to solve the growing electromagnetic pollution. Herein, a controllable open-cell structure is introduced into graphene aerogels by the graphene oxide (GO) Pickering emulsion. The open-cell graphene aerogel (OCGA) with multiple microstructures shows a significantly enhanced microwave absorption ability without any additions. A high microwave absorption performance with the minimum value of reflection loss (RLmin) of −51.22 dB was achieved, while the material density was only 4.81 mg/cm3. Moreover, by means of centrifugation, the graphene cells were arranged by their diameter, and a gradient, open-cell graphene structure was first fabricated. Based on this unique structure, an amazing microwave absorption value of −62.58 dB was reached on a condition of ultra-low graphene content of 0.53 wt%. In our opinion, such excellent microwave absorption performance results from multiple reflection and well-matched impedance brought by the open-cell and gradient structure, respectively. In addition, the structural strength of the OCGA is greatly improved with a maximum increase of 167% due to the introduction of cell structure. Therefore, the OCGAs with the gradient structure can be an excellent candidate for lightweight, efficient microwave absorption materials.

19 March 2020 in Polymers
Verified
Journal Article
Open access
PDF file
QMQilin Mei
Qilin Mei
HWHonghua Wang
Honghua Wang
XCXiaocheng Chen
Xiaocheng Chen
YWYing Wang
Ying Wang
ZHZhixiong Huang
Zhixiong Huang
With the rapid development of thermal protection systems for the aerospace industry and power electronics, polyarylacetylene (PAA) resin plays an important role because of its good mechanical properties, high glass transition temperature (Tg), low water absorption, high char yield (Yc), and the fact that there is no byproduct released in the curing process. In order to further improve the thermal property of PAA based FRP for the thermal protection field, the introduction of a zirconium element into arylacetylene is promising. In this paper, zirconium modified arylacetylene (ZAA) resin was prepared by two-step synthesis. The FTIR analysis characterized its molecular structure and confirmed the products. The viscosity of ZAA was about 6.5 Pa·s when the temperature was above 120 °C. The DSC analysis showed that the ZAA had a low curing temperature, and its apparent activation energy was 103.86 kJ/mol in the Kissinger method and 106.46 kJ/mol in the Ozawa method. The dielectric constant at 1 MHz of poly(zirconium modified arylacetylene) (PZAA) was 3.4. The TG analysis showed that the temperatures of a weight loss of 5% (Td5) and char yield (Yc) at 800 °C of PZAA were 407.5 °C and 61.4%, respectively. The XRD results showed the presence of SiO2 and ZrO2 in the PZAA residue after ablation. The XRF results showed that the contents of SiO2 and ZrO2 in PZAA residual after ablation were, respectively, 15.3% and 12.4%. The SEM showed that the surface of PZAA after ablation had been covered with a dense and rigid ceramic phase composed of ZrO2 and SiO2. Therefore, the introduction of Zr into arylacetylene greatly improved the densification of the surface after ablation, and improved the heat resistant property.

26 April 2020 in Polymers
Verified
Journal Article
Open access
PDF file
QMQilin Mei
Qilin Mei
HWHonghua Wang
Honghua Wang
DTDanliao Tong
Danliao Tong
JSJiuqiang Song
Jiuqiang Song
ZHZhixiong Huang
Zhixiong Huang
Benzoxazine resin has been paid more attention in the fields of aviation, electronics, automobiles and new energy industries because of its excellent comprehensive performance. Further application is limited, however, by shortcomings such as high brittleness and high curing temperature. Furthermore, higher thermal stability is imperiously demanded in special areas. Incorporating both an acetylene group and silicon into the benzoxazine monomer is a promising possible solution to improve the curing processability, thermal properties and toughness of benzoxazine. In this paper, an acetylene-functional/silicon-containing benzoxazine monomer was prepared by two-step synthesis, and acetylene-functional benzoxazine was also prepared as a comparison. FTIR and 1H NMR confirmed the molecular structure of acetylene-functional/silicon-containing benzoxazine. Differential scanning calorimetry (DSC) analysis showed that the initial and peak degradation temperatures of acetylene-functional/silicon-containing benzoxazine were decreased by 21 °C and 18 °C compared with acetylene-functional benzoxazine, respectively. The apparent activation energy of the curing reaction of acetylene-functional/silicon-containing benzoxazine was 83.1 kJ/mol, which was slightly lower than acetylene-functional benzoxazine (84.7 kJ/mol). TGA results showed that the acetylene-functional/silicon-containing benzoxazine had a higher thermal stability than acetylene-functional benzoxazine. The temperatures of 5% weight loss of acetylene-functional/silicon-containing benzoxazine were 380 °C in nitrogen and 485 °C in air, and the char yield at 1000 °C was 80% in nitrogen and 21% in air, respectively. The results of mechanical properties showed that the impact strength of acetylene-functional/silicon-containing benzoxazine was higher than acetylene-functional benzoxazine by 35.4%. The tensile and flexural strengths of acetylene-functional/silicon-containing benzoxazine were slightly higher than that of acetylene-functional benzoxazine.

1 January 2022 in e-Polymers
Verified
Journal Article
Open access
PDF file
HLHuizhi Liu
Huizhi Liu
QMQilin Mei
Qilin Mei
GDGuomin Ding
Guomin Ding
HXHan Xiao
Han Xiao
SCShuhui Chen
Shuhui Chen
ZHZhixiong Huang
Zhixiong Huang
The percolation thresholds of poly ether ether ketone/graphene (PEEK/Gr) composites in most studies are high due to the random distribution of Gr in the matrix. Here, aminated poly-ether-ether-ketone/graphene network (PEEK-NH 2 /GN) nanocomposites were prepared by electrostatic adsorption of PEEK-NH 2 with positive charges and graphene oxide with negative charges, followed by in -situ reduction and hot-pressing. The GN structure of composites was well presented in the images of scanning electron microscope. The PEEK-NH 2 /GN nanocomposites exhibited excellent electrical conductivity with a maximum conductivity of 0.0634 S·cm −1 and a percolation threshold as low as 0.25 vol%. In addition, the maximum tensile strength of nanocomposites was reached at 93 MPa when the Gr content was 0.5 wt%. We believe that this approach is a new avenue for the production of low filler high conductive polymer composites with potential commercial prospects in various fields.

14 June 2026 in Gels
Verified
Journal Article
Open access
PDF file
ZLZhengyang Lu
Zhengyang Lu
GDGuomin Ding
Guomin Ding
QMQilin Mei
Qilin Mei
BZBorui Zheng
Borui Zheng
KCKun Chen
Kun Chen
JSJiayang Shao
Jiayang Shao
High-performance thermal protection materials are urgently required in harsh thermal environments, such as hypersonic vehicles, the thermal runaway of energy batteries and high-temperature equipment. Conventional aerogels only exhibit passive thermal insulation and fail to resist instantaneous high-temperature attack. Herein, a cooling material of ammonium oxalate (AO) was introduced to achieve efficient, active endothermic protection. A cellular isolation effect induced by graphene nanosheets combined with anti-solvent crystallization was adopted to significantly decrease the size of AO crystals by over 93%. Based on superfine morphology and the constructed conduction network, the decomposition rate and heat absorption capacity of obtained graphene-doped AO powders (GdAPs) are improved by 41.2% and 30.4%, respectively. The mechanisms of morphology regulation and enhanced heat absorption are explored specifically in this study. Furthermore, GdAPs are embedded in phenolic resin to prepare thermal protection composite materials. Benefiting from their nearly complete thermal decomposition, GdAPs serve as a sacrificial template to generate discrete micropores in pyrolyzed resin. So, the as-prepared carbon aerogels (CAs) with a regulable microstructure exhibit an extremely low thermal conductivity of 0.056 W/(m·K), which is lower than those of reported CAs with the same density. Based on the above advantages, a synergistic endothermic-insulating thermal protection material is reported for the first time, and its heating rate is only 28.6% of that of commercial silica aerogel under identical high-temperature shock. Therefore, a new accessible strategy is demonstrated to provide high-efficiency thermal protection for resisting both abrupt and prolonged high temperature.

23 November 2015 in Materials Research Innovations
Verified
Journal Article
Closed access
QMQilin Mei
Qilin Mei
YDY. J. Ding
Y. J. Ding
XLX. Liu
X. Liu
JXJ. Xiao
J. Xiao
ZHZ. X. Huang
Z. X. Huang
This paper investigated rheological properties of diallyl orthophthalate/poly(vinyl chloride) (DAOP/PVC) blends and interfacial properties of DAOP/PVC composites reinforced by DAOP-modified glass fibres. Various DAOP/PVC blends were prepared with dicumyl peroxide, and the low-viscosity and cross-linkable DAOP was used as a reactive plasticiser to improve the processing and mechanical properties. On this basis, the rheology, thermal property and morphology of the prepared composites were studied by rheometer, differential scanning calorimeter, dynamic mechanical thermal analysis and scanning electron microscope. Dynamic mechanical thermal analysis results indicated that Tg of the cured DAOP/PVC blends was almost identical to that of PVC. Dynamic rheology of the cured blends showed that DAOP could reduce the processing temperature and PVC viscosity. Macro-mechanical properties and scanning electron microscope analysis demonstrated that interfacial bonding properties of the DAOP/PVC composites reinforced by modified glass fibre could be effectively enhanced by using DAOP, with its tensile and flexural strengths increased by 20.16 and 28.58%, respectively.