In the production process chain of lithium-ion battery cells, the filling, consisting of dosing and wetting steps, of the cell and its components with electrolyte liquid is eminent for the final product quality and costs. To reduce the unnecessary wetting duration between filling and formation, and thereby the production costs, a measurement method for the wetting progress is necessary. In this paper, electrochemical impedance spectroscopy (EIS) as a well-established technique is used for the first time to quantify the wetting degree of batteries during cell production. The experimental data of the EIS acquired during the dosing and subsequent wetting process is correlated to images recorded by in situ neutron radiography. Results show that the impedance of the battery cells strongly depends on the wetting degree of the cell assembly and can thus be used to determine the fully wetted state enabling faster processing.
1 March 2021 in Journal of the Electrochemical Society
A lithium- and manganese-rich layered transition metal oxide (LMR-NCM) cathode active material (CAM) is processed on a pilot production line and assembled with graphite anodes to ≈7 Ah multilayer pouch cells. Each production step is outlined in detail and compared to NCA/graphite reference cells. Using laboratory coin cell data for different CAM loadings and cathode porosities, a simple calculation tool to extrapolate and optimize the energy density of multilayer pouch cells is presented and validated. Scanning electron microscopy and mercury porosimetry measurements of the cathodes elucidate the effect of the CAM morphology on the calendering process and explain the difficulty of achieving commonly used cathode porosities with LMR-NCM cathodes. Since LMR-NCMs exhibit strong gassing during the first cycles, a modified formation procedure based on on-line electrochemical mass spectroscopy is developed that allows stable cycling of LMR-NCM in multilayer pouch cells. After formation and degassing, LMR-NCM/graphite pouch cells have a 30% higher CAM-specific capacity and a ≈5%–10% higher cell-level energy density at a rate of C/10 compared to NCA/graphite cells. Rate capability, long-term cycling, and thermal behavior of the pouch cells in comparison with laboratory coin cells are investigated in Part II of this work.
The shift in the transport sector from internal combustion engines to battery‐powered electric vehicles and the continued demand for portable applications will increase the need for batteries in the coming years. In order to optimize battery technologies, it is essential to fully understand the production process and the associated parameters as well as their influence on the chemical processes within the cell. At the Institute for Machine Tools and Industrial Management (iwb), extensive knowledge of the calendering process has been gathered including the investigation of the displacement behavior for both the calender rolls and the bearing, as well as the adhesion strength. The process parameters such as roll temperature and velocity, structure parameters (e.g. coating thickness, adhesion strength) and machine behavior parameters (displacement and bending line) were investigated using three calender models. The achieved porosities were verified via porosity consistency measurements. Based on the collected data, qualitative machine/material‐process‐structure‐ models were built up. Scanning electron microscope (SEM) and light microscopy support the relations made. In addition, a connection between vertical displacement and line load was established.
1 February 2021 in Journal of the Electrochemical Society
A lithium- and manganese-rich layered transition metal oxide-based cathode active material (LMR-NCM) with a reversible capacity of 250 mAh g−1 vs graphite is compared to an established NCA/graphite combination in multilayer lithium-ion pouch cells with a capacity of 5.5 Ah at a 1C discharge rate. The production of the cells, the electrode characterization as well as the formation is described in Part I of this study. In Part II, the two cell types are evaluated for their rate capability and their long-term stability. The specific capacity of the LMR-NCM pouch cells is ≈30% higher in comparison to the NCA pouch cells. However, due to the lower mean discharge voltage of LMR-NCM, the energy density on the cell level is only 11% higher. At higher discharge currents, a pronounced heat generation of the LMR-NCM pouch cells was observed, which is ascribed to the LMR-NCM voltage hysteresis and is only detectable in large-format cells. The cycling stability of the LMR-NCM cells is somewhat inferior due to their faster capacity and voltage fading, likely also related to electrolyte oxidation. This results in a lower energy density on the cell level after 210 cycles compared to the NCA pouch cells.