The transmission of conductance modes in atom-size gold contacts is investigated by simultaneously measuring conductance and shot noise. The results give unambiguous evidence that the current in the smallest gold contacts is mostly carried by nearly fully transmitted modes. In particular, for a single-atom contact the contribution of additional modes is only a few percent. In contrast, the trivalent metal aluminum does not show this property.

The integration of renewable energy sources on a large scale in the electrical energy distribution systems, as well as the widespread of non-linear loads, has led to a significant increase in power quality (PQ) disturbances. For this reason, PQ monitoring is also becoming a key task in medium voltage (MV) grids. The measurement of PQ at MV levels can only be performed using instrument transformers (ITs) to scale down the level of voltage and current to levels suitable for the input stage of PQ instruments. However, no international standards currently require the verification of the errors introduced by ITs in the measurement of PQ phenomena. Moreover, this issue is only partially addressed in the scientific literature, where papers dealing with specific and limited aspects of the problem can be found. For this reason, this paper aims to comprehensively assess the issue, proposing IT accuracy verification tests for different PQ parameters. First, a set of PQ phenomena relevant for IT testing is chosen, as well as the associated ranges of variation, based on a review of the enforced standards and the scientific literature. For each selected PQ phenomenon, possible performance indices and test waveforms are proposed. Finally, the proposed procedure is validated by applying it to the characterization of two different types of commercial voltage transformers.

We describe measurements with a pulse-driven Josephson arbitrary waveform synthesizer (JAWS) that uses a ternary arbitrary bit-stream generator as the bias source. This system is designed to be used as an AC Josephson voltage standard. From these measurements, we conclude that the system is operational for root-mean-square voltages of up to 220 mV. We measured the operating margins for different voltages synthesized with different numbers of junctions, waveforms, and bias conditions. We also present results on the influence of the critical current on the operating margins.