Long-term exposure to ultraviolet (UV) light can degrade and discolor bamboo; thus, coatings to protect it from UV exposure are required, especially for outdoor use. Benzotriazole (BTZ) and zinc oxide nanoparticles (NZnO) are organic and inorganic UV absorbers commonly used in UV shielding coatings. This study investigated the photostabilizing efficiency of acrylic-based bamboo exterior coatings using a combination of BTZ and NZnO. Different film formulations covering bamboo substrates were irradiated with artificial UV light for 500 h to accelerate aging. The UV-shielding effect on bamboo beneath various films was determined by CIELAB color space and Fourier transform infrared (FTIR) analysis. The film effectiveness was analyzed by scanning electron microscopy, wettability, UV-vis spectroscopy, and FTIR-attenuated total reflection (ATR) spectroscopy. Films containing BTZ provided higher resistance to photodegradation and more effectively inhibited photodiscoloration of the bamboo substrates than those prepared solely with NZnO. After 500 h of UV irradiation, the BTZ–NZnO film containing 2 wt % BTZ and 1 wt % NZnO showed the best coating performance. Strong synergistic effects were detected in the BTZ–NZnO coatings, particularly for the 2:1 ratio formulation. This study also demonstrated the potential of combining BTZ and NZnO as additives for developing stable, effective UV-shielding bamboo exterior coatings for outdoor applications.

The enormous pressures of energy consumption and the severe pollution produced by non-renewable resources have prompted researchers to develop various environmentally friendly energy-saving materials. Transparent bamboo represents an emerging result of biomass material research that has been identified and studied for its many advantages, including light weight, excellent light transmittance, environmental sustainability, superior mechanical properties, and low thermal conductivity. The present review summarizes methods for preparing transparent bamboo, including delignification and resin impregnation. Next, transparent bamboo performance is quantified in terms of optical, mechanical, and thermal conductivity characteristics and compared with other conventional and emerging synthetic materials. Potential applications of transparent bamboo are then discussed using various functionalizations achieved through doping nanomaterials or modified resins to realize advanced energy-efficient building materials, decorative elements, and optoelectronic devices. Finally, challenges associated with the preparation, performance improvement, and production scaling of transparent bamboo are summarized, suggesting opportunities for the future development of this novel, bio-based, and advanced material.

The effect of ultraviolet radiation on the surface deterioration of scrimber composites with different densities and levels of resin content was investigated for this paper. The surface color, gloss, roughness, and wettability of the samples were investigated to determine the extent of surface changes due to accelerated ageing. The results indicated that all scrimber composites exhibited variation in the color of their surfaces during artificial xenon light exposure. After artificial accelerated ageing, the surface contact angle and roughness were found to increase, whereas the surface gloss and surface free energy decreased. Furthermore, it was observed that the density and resin content of the scrimber composites contributed to reductions in their color variation, wettability, and roughness during weathering, which suggested that the density and resin content played important roles in determining their surface photodegradation properties. Artificial ageing resulted in the degradation of lignin and hemicellulose, thus causing severe surface characteristics.

Enhancing the weatherability of bamboo-based products is essential for increasing their application lifespan. In this study, a composite protective coating containing organic and inorganic UV absorbers and a hindered amine light stabilizer (HALS) was investigated for outdoor bamboo scrimber (OBS). The optical properties of weathered coated and uncoated samples were investigated by colorimetry and UV-Vis spectrophotometry. Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and thermal gravimetric analysis (TGA) were used to determine the physicochemical properties of the coating. The addition of HALS improved the photostability of the coating and preserved the properties of OBS. Compared to resin-coated samples, alicyclic amines in HALS inhibit photooxidation reactions between bamboo lignin and the coating adhesive. This inhibition is critical for maintaining the UV-shielding performance of the coating. We have developed a photostable protective coating for bamboo-based products whose widespread use can significantly help conserve critical forest resources.