In the framework of high-data-rate free-space optical low Earth orbit satellite-to-ground communication, we investigate, by means of a refined end-to-end numerical model of the link, the performance of a coherent receiver that combines an adaptive optics system and a specific digital receiver architecture. The design of a fine carrier recovery stage based on a phase-locked loop is presented and its performance is characterized. The end-to-end model includes the impact of atmospheric turbulence, adaptive optics correction, laser phase noise and of the frequency mismatch between the transmit and receiver lasers. The results show that adaptive optics coupled with classical digital phase-locked loop techniques can provide a reliable solution to the problem of carrier frequency and phase tracking in coherent satellite-to-ground optical links, after prior coarse frequency estimation. The phase-locked loop converges after a few hundreds of microseconds and accurately tracks the phase fluctuations. The residual amplitude fluctuations and laser phase noise are shown to be the dominant impairments for the link performance.
The transmission performance of coherent dual-polarization multi-band OFDM (DP-MB-OFDM) and QPSK (DP-QPSK) are experimentally compared for 100 Gb/s long-haul transport over legacy infrastructure combining G.652 fiber and 10 Gb/s WDM system. It is shown that DP-MB-OFDM and DP-QPSK have nearly the same performance at 100 Gb/s after transmission over a 10 × 100-km fiber line. Furthermore, the origin of performance degradations and limitations of the DP-MB-OFDM is explored numerically, as well as the impact of transmission distance and sub-band spacing.
High-power lasers, such as the Laser MegaJoule (LMJ), have to be phase modulated to avoid stimulated Brillouin scattering (SBS) that may strongly damage optics at the end of the laser chain. Current spectral broadening on LMJ is performed with a sinusoidal phase modulation. This pure sinusoidal phase modulation leads to inhomogeneous spectral power densities (SPD). Thus, for a same SBS power threshold, the sinusoidal phase-modulated spectrum has to be larger than the equivalent ideal SPD with isoenergetic peaks. We present in this paper a technique to generate energy-balanced Dirac peaks spectra thanks to nonsinusoidal phase modulations. Thus, we can build a narrower spectrum with a nonsinusoidal phase modulation that has the same SBS threshold as a sinusoidal phase modulation, and we show that FM-to-AM conversion can be strongly reduced, which is of great interest for LMJ laser performance, with reductions up to 40%.
Distributed optical fiber sensors using Brillouin scattering have already demonstrated their ability to measure changes in strain and temperature over long distance. However, the simultaneous sensitivity of the Brillouin scattering to these two parameters is a real disadvantage during the instrumentation and monitoring of structures, such as for civil engineering, oil industry applications (i.e. instrumentation of pipelines or wells) or electrical power cables monitoring. In this article, we present a new instrument enabling independently measurement of temperature or strain using a unique fiber in a single measurement. This method, which we will call B-OTDR DSTS for "Distributed Strain and Temperature Sensing", is based on the measurement of frequency (as a standard BOTDR) but also intensity of Brillouin scattering. However, as the measurement of the latter requires an accurate measurement of power levels along the fiber, it is necessary to correct the losses by a Rayleigh OTDR measurement. The architecture of the BOTDR-DSTS allows simultaneous measurement of the Brillouin and Rayleigh backscatters. We will detail the validation results of this new device and show the interest of such a measurement on the instrumentation of a cable into a 2 km deep observation well.
Polarization effects may induce severe performances degradation in polarization multiplexed optical fiber transmis- sions. Those systems can be seen as 2×2 multi-antennas systems as the emitted polarizations can be considered as 2 input signals and the received polarizations as 2 output signals. Therefore, Space-Time code can be used to take benefit of this configuration and enhance the transmission performances but they have to be combined with optical OFDM to suppress the fiber dispersion and allow their decoding. In wireless 2×2 multi-antennas systems, the Golden and the Silver code are respectively the two best Space- Time codes so, we propose to use those two codes on polarization multiplexed systems. The performances of the Space-Time codes on the optical fiber channel are different than on the wireless channel. Simulations show than the Silver code outperforms the Golden code. Nevertheless, we also show that Space-Time coding can dramatically mitigate the polarization dependent loss (PDL) impairments.
16 August 2013 in IEEE Photonics Technology Letters
Adaptive blind equalization based on modulus algorithm is very efficient to carry out polarization separation and inter-symbol interference compensation in a coherent dual-polarization quaternary-phase-shift-keying transmission system. Its performance is, however, very poor when coherent dual-polarization binary-phase-shift-keying (BPSK) modulation is considered. In this letter, we propose a new blind equalizer adapted to any PSK constellation and we theoretically show its convergence. Experimental BER measurements and convergence analysis are performed in a 40 Gbps coherent dual-polarization BPSK system under different physical impairments. We show that our equalizer outperforms existing blind algorithms.