More than half of the energy consumption in buildings is utilized for the heating and/or cooling of the indoor environment. The building envelope plays a key role in controlling the effects of external weather and, therefore, is linked with many passive design strategies. Thermal energy storage (TES) and phase change materials (PCMs) are efficient techniques, which can store a high density of thermal energy. The PCMs attract many researchers to implement them in the components of buildings for thermal management. In building walls, they were implemented in different positions and have achieved different results. This paper aims to review the related literature that examines PCMs’ application in different positions within the building walls to locate their optimum position and the influential parameters. It was found that the optimum positions of PCMs are highly dependent on performing a daily complete melting/freezing cycle to be ready for the following day. Many parameters can influence this, including climate and weather conditions and the application target, PCMs’ melting temperature and heat of fusion, PCMs’ amount, the thermal properties of the wall’s materials, a mechanical heating/cooling or free-running indoor environment, and wall orientation. An optimization process using the simulation tools is suggested so that the optimum position of the PCMs can be located.
Building sector is associated with high energy consumption and greenhouse gas emissions, which contribute to climate change. Sustainable development emphasizes any actions to reduce climate change and its effect. In Malaysia, half of the energy utilized in buildings goes towards building cooling. Thermal comfort studies and adaptive thermal comfort models reflect the high comfort temperatures for Malaysians in naturally conditioned buildings, which make it possible to tackle the difference between buildings’ indoor temperature and the required comfort temperature by using proper passive measures. This study investigates the effectiveness of building’s retrofitting with phase change materials (PCMs) as a passive cooling technology to improve the indoor thermal environment for more comfortable conditions. PCM sheets were numerically investigated below the internal finishing of the walls. The investigation involved an optimization study for the PCMs transition temperatures and quantities. The results showed significant improvement in the indoor thermal environment, especially when using lower transition temperatures and higher quantities of PCMs. Therefore, the monthly thermal discomfort time has decreased completely, while the thermal comfort time has increased to as high as 98%. The PCM was effective year-round and the optimum performance for the investigated conditions was achieved when using 18mm layer of PCM27-26.
17 February 2022 in Case Studies in Construction Materials