Tribocorrosion in taper junctions of retrieved anatomic shoulder arthroplasty implants was evaluated. A comparison of the tribocorrosion between cobalt-chromium and titanium alloy stems was conducted and the observations were correlated with the individual’s clinical data. Adverse effects caused by metal debris and subsequent elevated serum metal ion levels are frequently reported in total hip arthroplasty. In total shoulder arthroplasty, to date only a small number of retrieval analyses are available and even fewer address the issue of tribocorrosion at the taper junctions. A total of 36 retrieved hemiarthroplasties and total shoulder arthroplasties were assessed using the modified Goldberg score. The prevalence of fretting and corrosion was confirmed in this cohort. Titanium stems seem to be more susceptible to damage caused by tribocorrosion than cobalt-chromium stems. Furthermore, stemless designs offered less tribocorrosion at the taper junction than stemmed designs. A weak correlation between time to revision and increased levels of tribocorrosion was seen. Whether or not tribocorrosion can lead to adverse clinical reactions and causes failure of shoulder arthroplasties remains to be examined.

Adequate primary stability of the acetabular revision construct is necessary for long-term implant survival. The difference in primary stability between tantalum and titanium components is unclear. Six composite hemipelvises with an acetabular defect were implanted with a tantalum augment and cup, using cement fixation between cup and augment. Relative motion was measured at cup/bone, cup/augment and bone/augment interfaces at three load levels; the results were compared to the relative motion measured at the same interfaces of a titanium cup/augment construct of identical dimensions, also implanted into composite bone. The implants showed little relative motion at all load levels between the augment and cup. At the bone/augment and bone/cup interfaces the titanium implants showed less relative motion than tantalum at 30% load (p < 0.001), but more relative motion at 50% (p = n.s.) and 100% (p < 0001) load. The load did not have a significant effect at the augment/cup interface (p = 0.086); it did have a significant effect on relative motion of both implant materials at bone/cup and bone/augment interfaces (p < 0.001). All interfaces of both constructs displayed relative motion that should permit osseointegration. Tantalum, however, may provide a greater degree of primary stability at higher loads than titanium. The clinical implication is yet to be seen

The comprehensive “PJI-TNM classification” for the description of periprosthetic joint infections (PJI) was introduced in 2020. Its structure is based on the well-known oncological TNM classification to appreciate the complexity, severity, and diversity of PJIs. The main goal of this study is to implement the new PJI-TNM classification into the clinical setting to determine its therapeutic and prognostic value and suggest modifications to further improve the classification for clinical routine use. A retrospective cohort study was conducted at our institution between 2017 and 2020. A total of 80 consecutive patients treated with a two-stage revision for periprosthetic knee joint infection were included. We retrospectively assessed correlations between patients’ preoperative PJI-TNM classification and their therapy and outcome and identified several statistically significant correlations for both classifications, the original and our modified version. We have demonstrated that both classifications provide reliable predictions already at the time of diagnosis regarding the invasiveness of surgery (duration of surgery, blood and bone loss during surgery), likelihood of reimplantation, and patient mortality during the first 12 months after diagnosis. Orthopedic surgeons can use the classification system preoperatively as an objective and comprehensive tool for therapeutic decisions and patient information (informed consent). In the future, comparisons between different treatment options for truly similar preoperative baseline situations can be obtained for the first time. Clinicians and researchers should be familiar with the new PJI-TNM classification and start implementing it into their routine practice. Our adjusted and simplified version (“PJI-pTNM”) might be a more convenient alternative for the clinical setting.