Dilla Duryha Berhanuddin

Dr. Dilla Duryha Berhanuddin

National University of Malaysia, Bangi, Malaysia

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
3 December 2020 in Magnetochemistry
Verified
Journal Article
Open access
PDF file
LGLokesh Srinath Ganapathe
Lokesh Srinath Ganapathe
MMMohd Ambri Mohamed
Mohd Ambri Mohamed
RYRozan Mohamad Yunus
Rozan Mohamad Yunus
DBDilla Duryha Berhanuddin
Dilla Duryha Berhanuddin
Nanotechnology has gained much attention for its potential application in medical science. Iron oxide nanoparticles have demonstrated a promising effect in various biomedical applications. In particular, magnetite (Fe3O4) nanoparticles are widely applied due to their biocompatibility, high magnetic susceptibility, chemical stability, innocuousness, high saturation magnetisation, and inexpensiveness. Magnetite (Fe3O4) exhibits superparamagnetism as its size shrinks in the single-domain region to around 20 nm, which is an essential property for use in biomedical applications. In this review, the application of magnetite nanoparticles (MNPs) in the biomedical field based on different synthesis approaches and various surface functionalisation materials was discussed. Firstly, a brief introduction on the MNP properties, such as physical, thermal, magnetic, and optical properties, is provided. Considering that the surface chemistry of MNPs plays an important role in the practical implementation of in vitro and in vivo applications, this review then focuses on several predominant synthesis methods and variations in the synthesis parameters of MNPs. The encapsulation of MNPs with organic and inorganic materials is also discussed. Finally, the most common in vivo and in vitro applications in the biomedical world are elucidated. This review aims to deliver concise information to new researchers in this field, guide them in selecting appropriate synthesis techniques for MNPs, and to enhance the surface chemistry of MNPs for their interests.

24 March 2021 in Micromachines
Verified
Journal Article
Open access
PDF file
RPRex Loh Kean Ping
Rex Loh Kean Ping
MMMohd Ambri Mohamed
Mohd Ambri Mohamed
AMABHAY KUMAR MONDAL
ABHAY KUMAR MONDAL
MTMohamad Fariz Taib
Mohamad Fariz Taib
MSMohd Hazrie Samat
Mohd Hazrie Samat
RBRaihana Bahru
Raihana Bahru
The crystal structure, electron charge density, band structure, density of states, and optical properties of pure and strontium (Sr)-doped β-Ga2O3 were studied using the first-principles calculation based on the density functional theory (DFT) within the generalized-gradient approximation (GGA) with the Perdew–Burke–Ernzerhof (PBE). The reason for choosing strontium as a dopant is due to its p-type doping behavior, which is expected to boost the material’s electrical and optical properties and maximize the devices’ efficiency. The structural parameter for pure β-Ga2O3 crystal structure is in the monoclinic space group (C2/m), which shows good agreement with the previous studies from experimental work. Bandgap energy from both pure and Sr-doped β-Ga2O3 is lower than the experimental bandgap value due to the limitation of DFT, which will ignore the calculation of exchange-correlation potential. To counterbalance the current incompatibilities, the better way to complete the theoretical calculations is to refine the theoretical predictions using the scissor operator’s working principle, according to literature published in the past and present. Therefore, the scissor operator was used to overcome the limitation of DFT. The density of states (DOS) shows the hybridization state of Ga 3d, O 2p, and Sr 5s orbital. The bonding population analysis exhibits the bonding characteristics for both pure and Sr-doped β-Ga2O3. The calculated optical properties for the absorption coefficient in Sr doping causes red-shift of the absorption spectrum, thus, strengthening visible light absorption. The reflectivity, refractive index, dielectric function, and loss function were obtained to understand further this novel work on Sr-doped β-Ga2O3 from the first-principles calculation.

21 November 2022 in Magnetochemistry
Verified
Journal Article
Open access
PDF file
LGLokesh Srinath Ganapathe
Lokesh Srinath Ganapathe
Jamal KazmiJamal Kazmi
Jamal Kazmi
MMMohd Ambri Mohamed
Mohd Ambri Mohamed
DBDilla Duryha Berhanuddin
Dilla Duryha Berhanuddin
In this study, the effect of molarity on the structural, magnetic, and heat dissipation properties of magnetite nanoparticles (MNPs) was investigated to optimise the parameters for potential application in magnetic hyperthermia therapy (MHT). MHT works based on the principle of local temperature rise at the tumour site by magnetic iron oxide nanoparticles (MIONPs) with the application of an alternating magnetic field. MHT is a safe method for cancer treatment and has minimal or no side effects. Magnetite (Fe3O4) is the best material among MIONPs to be applied in local MHT due to its biocompatibility and high saturation magnetisation value. MNPs were prepared by co-precipitation at varying molarity. Structural characterisation was performed via X-ray powder diffraction (XRD) for crystalline structure analysis and field-emission scanning electron microscopy (FESEM) for morphology and particle size analysis. Measurement of the magnetic properties of the as-synthesised MNPs was carried out using a vibrating sample magnetometer (VSM). Power loss (P) was determined theoretically. The increase in molarity resulted in significant effects on the structural, magnetic, and heat dissipation properties of MNPs. The particle size and saturation magnetisation (Ms) decreased with the gradual addition of base but increased, together with crystallinity, with the gradual addition of iron source. M3 recorded the smallest crystalline size at 3.559 nm. The sample with the highest molarity (M4) displayed the highest heat generation capacity with a p value of up to 0.4056 W/g. High p values at the nano-scale are crucial, especially in local MHT, for effective heat generation, thus proving the importance of molarity as a vital parameter during MNP synthesis.

18 June 2020 in Applied Sciences
Verified
Journal Article
Open access
PDF file
LHLilik Hasanah
Lilik Hasanah
HNHarbi Setyo Nugroho
Harbi Setyo Nugroho
Chandra WulandariChandra Wulandari
Chandra Wulandari
BMBudi Mulyanti
Budi Mulyanti
DBDilla Duryha Berhanuddin
Dilla Duryha Berhanuddin
RMRizalman Mamat
Rizalman Mamat
The properties of light and its interaction with biological analytes have made it possible to design sophisticated and reliable optical-based biomedical sensors. In this paper, we report the simulation, design, and fabrication of microring resonator (MRR)-based sensors for the detection of diabetic glucose levels. Electron Beam Lithography (EBL) with 1:1 hydrogen silsesquioxane (HSQ) negative tone resist were used to fabricate MRR on a Silicon-on-Insulator (SOI) platform. Scanning Electron Microscopy (SEM) was then used to characterize the morphology of the MRR device. The full-width at half-maximum (FWHM) and quality factors of MRR were obtained by using a tunable laser source (TLS) and optical spectrum analyzer (OSA). In this paper, the three-dimensional Finite Difference Time Domain (3D FDTD) approach has been used to simulate the proposed design. The simulation results show an accurate approximation with the experimental results. Next, the sensitivity of MRR-based sensors to detect glucose levels is obtained. The sensitivity value for glucose level detection in the range 0% to 18% is 69.44 nm/RIU. This proved that our MRR design has a great potential as a sensor to detect diabetic glucose levels.

30 June 2019 in Sains Malaysiana
Verified
Journal Article
Closed access
DBDilla Duryha Berhanuddin
Dilla Duryha Berhanuddin
NRN.E.A. Razak
N.E.A. Razak
MLM.A. Lourenço
M.A. Lourenço
BMB.Y. Majlis
B.Y. Majlis
KHK.P. Homewood
K.P. Homewood

30 April 2021 in International Journal of Optics
Verified
Journal Article
Open access
PDF file
NANOOR AZIE AZURA MOHD ARIF
NOOR AZIE AZURA MOHD ARIF
DBDilla Duryha Berhanuddin
Dilla Duryha Berhanuddin
AEAbang Anuar Ehsan
Abang Anuar Ehsan
Optical fibers with high sensitivity are in demand due to their great potential in sensor application. Semiconductors, such as ZnO, are good materials. Using them as a second cladding offers opportunities in realizing next-generation multimaterial fiber optics. COMSOL Multiphysics is used to simulate heterocore macrobend fiber optics with the same curvature radius but different values of refractive index and thickness of ZnO films. The optimum thickness of ZnO films is identified by determining the loss of optical fibers. Macrobend heterocore fiber optics by adding ZnO thin film has been established by simulating and interpreting the relationship in terms of transmission and refractive index in the evanescent field. These results will provide a reliable fundamental to guide the performance in practice.