The aim of this article is to develop a three-dimensional computational model to simulate the traveling process of inlet distortion in fan and compressor with low calculated costs. The model is established based on the body force model in the framework of modern Computational Fluid Dynamics technology. The flow is assumed to be axisymmetric in each meridional blade passage. The impact of the solid blade shapes on airflow is modeled with blade blockage factor and blade body force. The relationships between blade body force and blade inlet Mach number together with attack angle are established with the deviation angle model and loss model. Meanwhile, the effect of the turbulent mixing is also taken into consideration. This developed computational code is then applied to the investigation of a transonic fan rotor and of a four-stage low-speed axial compressor under clean and distorted inlet condition. The predicted performance of both the fan rotor and the four-stage compressor with clean inlet are in line with the experimental results. A quantitative comparison is made between the computational results and the measurement data of the fan rotor with inlet distortion. Additionally, the transfer behavior of inlet distortion in the four-stage compressor is simulated by the model. All results demonstrate the effectiveness and practicability of the model.
7 July 2016 in Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
This study aims at establishing a three-dimensional numerical model, compressor aerodynamic performance analysis model, to simulate the impact of complicated distorted flow on multistage axial flow compressor based on the body force model. The model solves the compressible three-dimensional Euler equations, which are modified to include source terms representing the effect of the blade rows. In this study, the association between blade source terms and entry Mach number together with attack angle could be established with the deviation angle model and loss model. In this paper, compressor aerodynamic performance analysis model is used to evaluate the effect of inlet circumferential total pressure distortion and swirl distortion on a five-stage high-pressure compressor. Calculated operating maps for compressor agree well with the experimental results. Meanwhile, the traveling process of inlet distortions in the multistage compressor is correctly revealed. The wide application prospect of the model can be seen in the area of inlet distortion problems.
31 March 2021 in Journal of Engineering for Gas Turbines and Power
Owing to the manufacturing and assembly error or the fatigue of long-time operation, nonaxisymmetric tip clearance is actually a common phenomenon in compressors. It is also well accepted that tip leakage flow, associated with tip clearance size and loading, has a strong influence on the performance and stall inception of compressors. The work of this paper, based on an eccentric compressor with/without inlet swirl distortion, is aimed at strengthening the understanding of stall inception for a real geometry compressor experimentally. Results indicate that rotor tip blockage and flow unsteadiness vary evidently around the circumference. For this compressor, the maximum tip flow unsteadiness and blockage happens at the location near the minimum clearance under the condition of clean inlet flow. Before the occurrence of stall inception, disturbances arise and vanish intermittently within the region of high unsteadiness. However, it fails to rotate due to the inhibition of the low unsteadiness region. Once the most robust region is no longer able to suppress disturbances, stability finally breaks down and stall inception generates. After exerting inlet paired swirl, unsteadiness within the region of positive preswirl decreases significantly and the maximum unsteadiness location shifts, while the increase for the region with negative preswirl is nearly negligible. As a result, stall margin of the compressor is improved.
The aim of this article mainly lies in two aspects. The first is to investigate the effect of inlet swirl distortion on the performance and stability of a low-speed compressor experimentally. The second is to quantify swirl pattern revolution through the compressor and find out background causes of the change in compressor performance. Swirl distortion makes the leading-edge incidence opposite between tip and hub regions, compared to that of clean flow. And the compressor performance change is ultimately determined by these two aspects. Results indicate that negative bulk swirl improves pressure rise, and the effect is on the contrary to the positive bulk swirl. Under the condition of paired swirl, pressure rise also presents a reduction. All these three types of swirl have little effect on the stall boundary. Although swirl distortion shows clear recovery at rotor exit, downstream components still work at off-design conditions due to the induced nonuniformity in axial velocity and total pressure.