Based on the scale-adaptive simulation, the interaction mechanism between the tip leakage flow (TLF) and the inlet boundary layer (IBL) and its effects on the tip flow field and aerodynamic performance of the compressor cascade were investigated. The time-averaged results show that the IBL reduces the blade tip load near the leading edge region, decreases the axial momentum of the TLF, and inhibits the development of the TLF to a certain extent. On the other hand, the IBL promotes the coupling of the tip leakage vortex, secondary vortex, and separation vortex and induces breakdown, resulting in a large area of severe flow separation in the corner region, greatly reducing the diffusion capacity and significantly increasing the flow loss in the tip region. The analysis of the unsteady transient flow fields indicates that the unsteady fluctuation in the tip region is mainly caused by the tip leakage vortex and flow separation near the blade trailing edge. The former is suppressed under the influence of the IBL, while the latter is amplified. The high-intensity oscillation due to the breakdown and decomposition of the tip vortex structures plays a critical role in the fluctuation of the cascade performance. By means of proper orthogonal decomposition, it is found that the IBL enhances the fluctuation of small-scale vortex structures related to flow separation and leakage flow and makes the stability of the tip flow field worse.
10 January 2023 in Aerospace Science and Technology
To explain the effect of tip leakage flow on the performance of an axial-flow transonic compressor, the compressors with different rotor tip clearances were studied numerically. The results show that as the rotor tip clearance increases, the leakage flow intensity is increased, the shock wave position is moved backward, and the interaction between the tip leakage vortex and shock wave is intensified, while that between the boundary layer and shock wave is weakened. Most of all, the stall mechanisms of the compressors with varying rotor tip clearances are different. The clearance leakage flow is the main cause of the rotating stall under large rotor tip clearance. However, the stall form for the compressor with half of the designed tip clearance is caused by the joint action of the rotor tip stall caused by the leakage flow spillage at the blade leading edge and the whole blade span stall caused by the separation of the boundary layer of the rotor and the stator passage. Within the investigated varied range, when the rotor tip clearance size is half of the design, the compressor performance is improved best, and the peak efficiency and stall margin are increased by 0.2% and 3.5%, respectively.