Over the past decade, energy demand has witnessed a drastic increase, mainly due to huge development in the industry sector and growing populations. This has led to the global utilization of renewable energy resources and technologies to meet this high demand, as fossil fuels are bound to end and are causing harm to the environment. Solar PV (photovoltaic) systems are a renewable energy technology that allows the utilization of solar energy directly from the sun to meet electricity demands. Solar PV has the potential to create a reliable, clean and stable energy systems for the future. This paper discusses the different types and generations of solar PV technologies available, as well as several important applications of solar PV systems, which are “Large-Scale Solar PV”, “Residential Solar PV”, “Green Hydrogen”, “Water Desalination” and “Transportation”. This paper also provides research on the number of solar papers and their applications that relate to the Sustainable Development Goals (SDGs) in the years between 2011 and 2021. A total of 126,513 papers were analyzed. The results show that 72% of these papers are within SDG 7: Affordable and Clean Energy. This shows that there is a lack of research in solar energy regarding the SDGs, especially SDG 1: No Poverty, SDG 4: Quality Education, SDG 5: Gender Equality, SDG 9: Industry, Innovation and Infrastructure, SDG 10: Reduced Inequality and SDG 16: Peace, Justice and Strong Institutions. More research is needed in these fields to create a sustainable world with solar PV technologies.

Clean and safe energy sources are essential for the long-term growth of society. Wind energy is rapidly expanding and contributes to many countries’ efforts to decrease greenhouse gas emissions. In terms of sustainable development goals (SDGs), renewable energy development promotes energy security while also facilitating community development and environmental conservation on a global scale. In this context, the current article aims to investigate wind energy’s role within the SDGs. Furthermore, the present study highlights the role of the London Array wind farm in achieving the SDGs. Indeed, deploying clean and economical energy sources in place of conventional fossil fuel power plants provides vital insights into environmental impacts. The London Array operation is saving approximately 1 million tons of carbon dioxide (CO₂) equivalent. Furthermore, the London Array contributes to the achievement of multiple SDGs, including SDG 8: decent employment and economic growth; SDG 9: industry, innovation, and infrastructure; SDG 11: sustainable cities and communities; and SDG 15: life on land. To enhance the London Array’s contribution to the SDGs, a total of 77 indicators (key performance indicators) were proposed and compared to the current measurements that have been carried out. The results showed that the London Array used most of the suggested indicators without classifying them from the SDGs’ perspective. The proposed indicators will help cut operation costs, mitigate climate change and environmental damage, improve employee engagement and morale, reduce learning gaps, set goals and plans, and use resources efficiently.

In this paper, a classic proportional–integral (PI) control strategy as an energy management strategy (EMS) and a microgrid stand-alone power system configuration are proposed to work independently out of grid. The proposed system combines photovoltaics (PVs), fuel cells (FCs), batteries, and supercapacitors (SCs). The system supplies a dump load with its demand power. The system includes DC/DC and DC/AC converters, as well as a maximum power point tracking (MPPT) to maximize the harvested energy from PV array. The system advantages are represented to overcome the problem of each source when used individually and to optimize the hydrogen consumption. The classic PI control strategy is used to control the main system parameters like FC current and the state-of-charge (SOC) for the battery and SC. In order to analyze and monitor the system, it was implemented in the MATLAB/Simulink. The simulation done for fuzzy logic and high frequency decoupling and state machine control strategies to validate the PI classic control strategy. The obtained results confirmed that the system works efficiently as a microgrid system. The results show that the SOC for the battery is kept between 56 and 65.4%, which is considered a proper value for such types of batteries. The DC bus voltage (VDC) is kept within the acceptable level. Moreover, the H₂ fuel consumption is 12.1 gm, as the FCs are used as supported sources working with the PV. A big area for improvement is available for cost saving, which suggests the need for further research through system optimization and employing different control strategies.

Two forms of activated carbon (i.e., granular and powdered forms) used to test mercury removal in solution. These activated carbons were obtained from the shells of a palmae biomass and used in mercury ion removal in aquatic systems. The African palmae shell taken out from a broadly and simply full-fledged palm tree. This biomass serves as a precursor in the formulation of activated carbons not documented. The powdered and granular fractions of activated carbons described for chemical composition, isoelectric point, and surface area. The mechanism of reactions and the kinetics involved were studied using the results of protonation and rate limitations. The parameters used in the batch mode study included pH, contact time, initial concentration of the adsorbate and the dose of the activated carbons. A comparison of performances, contact time demonstrated the highest adsorption efficiency of 93% for the powdered activated carbon and 92% for the granular activated carbon. The dosage recorded the lowest adsorption efficiency of 84% using granular activated carbon. Comparatively, this study brought to the fore that activated carbon derived from the Plamae biomass remains a novel bio-sorbent

Lead is one of the fundamentally risky metal ions existing in wastewater. A laboratory batch technique carried out to study the impact of initial concentration, pH, temperature, a dose of adsorbent and contact time on the elimination of lead ions onto oil shell sedimentary rock as natural clay. Two natural inorganic composites Kaolinite/Smectite-A and Kaolinite/Smectite-B have been used. The lead removal enlarged with rising initial metal solution concentration, contact time and pH. The elimination reaction speed was high at the initial period of contact time and then decreased to attain equilibrium at 45, 30 min for Kaolinite/Smectite-A and Kaolinite/Smectite-B adsorbents, respectively. Mutually, Langmuir and Freundlich’s isotherms are applicable to describe the metals adsorption and thermodynamic parameters ΔG; ΔS and ΔH were calculated indicating that the adsorption process is physisorption, spur-of-the-moment and endothermic.