Bone tissue engineering is constantly in need of new material development with improved biocompatibility or mechanical features closer to those of natural bone. Other important factors are the sustainability, cost, and origin of the natural precursors involved in the technological process. This study focused on two widely used polymers in tissue engineering, namely polylactic acid (PLA) and thermoplastic polyurethane (TPU), as well as bovine-bone-derived hydroxyapatite (HA) for the manufacturing of core-shell structures. In order to embed the ceramic particles on the polymeric filaments surface, the materials were introduced in an electrical oven at various temperatures and exposure times and under various pressing forces. The obtained core-shell structures were characterized in terms of morphology and composition, and a pull-out test was used to demonstrate the particles adhesion on the polymeric filaments structure. Thermal properties (modulated temperature and exposure time) and the pressing force’s influence upon HA particles’ insertion degree were evaluated. More to the point, the form variation factor and the mass variation led to the optimal technological parameters for the synthesis of core-shell materials for prospect additive manufacturing and regenerative medicine applications.
The surface physico-chemistry of metallic implants governs their successful long-term functionality for orthopedic and dentistry applications. Here, we investigated the feasibility of harmoniously combining two of the star materials currently employed in bone treatment/restoration, namely, calcium-phosphate-based bioceramics (in the form of coatings that have the capacity to enhance osseointegration) and titanium alloys (used as bulk implant materials due to their mechanical performance and lack of systemic toxicity). For the first time, bovine-bone-derived hydroxyapatite (BHA) was layered on top of Ti6Al4V substrates using powder injection laser cladding technology, and then subjected, in this first stage of the research, to an array of physical-chemical analyses. The laser processing set-up involved the conjoined modulation of the BHA-to-Ti ratio (100 wt.% and 50 wt.%) and beam power range (500–1000 W). As such, on each metallic substrate, several overlapped strips were produced and the external surface of the cladded coatings was further investigated. The morphological and compositional (SEM/EDS) evaluations exposed fully covered metallic surfaces with ceramic-based materials, without any fragmentation and with a strong metallurgical bond. The structural (XRD, micro-Raman) analyses showed the formation of calcium titanate as the main phase up to maximum 800 W, accompanied by partial BHA decomposition and the consequential advent of tetracalcium phosphate (markedly above 600 W), independent of the BHA ratio. In addition, the hydrophilic behavior of the coatings was outlined, being linked to the varied surface textures and phase dynamism that emerged due to laser power increment for both of the employed BHA ratios. Hence, this research delineates a series of optimal laser cladding technological parameters for the adequate deposition of bioceramic layers with customized functionality.
30 December 2020 in Studia Universitatis Babeș-Bolyai Chemia
Processing calcium and phosphor-rich natural resources, such as marble and seashells, and bovine and fish bones, envelops an environmentally friendly and eco-sustainable promising alternative for developing biomimetic products for various orthopaedic applications. In this regard, convenient, efficient, facile and completely reproducible technologies were involved in the fabrication process of biogenic calcium phosphates-based products through the conversion of the proposed resources. The aim of this research was to comparatively evaluate the morpho-compositional, structural and mechanical features of the developed products, subjected in advance to an air sintering program. The results revealed that the high temperature affects differently the morphological characteristics of the samples and facilitates the conservation of several elements, traced from their natural marine or terrestrial habitat. Moreover, the nature of the initial precursors clearly influenced the final composition of the samples: biphasic configuration for calcium carbonate derived products versus single phase for the calcium phosphate ones. The mechanical features are also a composed result of the resources type and sintering process, with significant recorded differences. Therefore, this study unveils the prospect for suitable strategies in terms of adequate natural precursor, fabrication technology and final properties of the biogenic products destined for a certain application in the biomedicine field.