Damar Adhika

Dr. Damar Adhika

Institut Teknologi Bandung

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 April 2019 in Bulletin of Chemical Reaction Engineering & Catalysis
Verified
Journal Article
Open access
PDF file
AAAuliya Nur Amalina
Auliya Nur Amalina
VSVeinardi Suendo
Veinardi Suendo
MRMuhammad Reza
Muhammad Reza
PMPhutri Milana
Phutri Milana
RSRisa Rahmawati Sunarya
Risa Rahmawati Sunarya
VTViny Veronika Tanuwijaya
Viny Veronika Tanuwijaya
Polyaniline Emeraldine Salt (PANI ES) as a conductive polymer has been used as a Pt-free counter electrode materials in DSSC. In this study, polymerization temperature was varied at relatively high temperature from 308 to 348 K with respect to the standard low polymerization temperature at 273 K. The synthesis held in varied high-temperature to study the effect of synthesis condition resulted to the performance as counter electrode in DSSC. The effect of high-temperature synthesis condition gives interesting results, the FTIR-ATR spectra show the presence of vibrational modes of phenazine structure obtained at high polymerization temperature, indicate the changing in the chain geometry. Raman Spectroscopy shows the decrease of the I1194/I1623 intensity ratio that can be interpreted that the degree-of-freedom of C-H bond bending mode decreases in the benzenoid ring, while the stretching mode degree-of-freedom along the chain is preserved or increased. The electrical conductivity profile has changed from metal-like at low-temperature into a semiconductor-like profile at high-temperature. Scanning Electron Microscope images reveals that a change in the morphology of PANI ES with temperature. At low-temperature (273 K) the morphology has a globular shape, while at high-temperature it tends to form nanorod structure. DSSC device with highest efficiency is attained for PANI ES polymerized at 273 K (1.91%) due to its high conductivity. The lowest efficiency is observed in device using PANI ES synthesized at 328 K (1.15%) due to its low conductivity due to the formation of phenazine structure.

24 April 2019 in Materials Research Express
Verified
Journal Article
Closed access
PDF file
PAPepen Arifin
Pepen Arifin
MMMuhammad Arief Mustajab
Muhammad Arief Mustajab
SHSuprijadi Haryono
Suprijadi Haryono
DADamar Adhika
Damar Adhika
ANAthanasius A Nugraha
Athanasius A Nugraha

24 October 2019 in IEEE Access
Verified
Journal Article
Open access
FIFitriana
Fitriana
NSNi Luh Wulan Septiani
Ni Luh Wulan Septiani
DADamar Adhika
Damar Adhika
ASAdhitya Gandaryus Saputro
Adhitya Gandaryus Saputro
NUNugraha
Nugraha
Brian YuliartoBrian Yuliarto
Brian Yuliarto
(002)-oriented ZnO nanostructure for NO gas sensing application was successfully grown on glass substrates by two-step processes, which are seeding process via dip-coating method using diethanolamine (DEA) as chelating agent and growth process via chemical bath deposition (CBD). The samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Two ZnO film samples, named samples A and B, were fabricated without and with DEA addition in the seeding process, respectively. XRD observation results show that ZnO film was successfully deposited on both samples, where sample A has a random crystal orientation; while sample B has a very dominant (002) orientation. Further, the selected area electron diffraction (SAED) observation with TEM confirmed that sample A has a random orientation indicated by a ring-shaped diffraction pattern; while sample B has a hexagonal crystalline structure diffraction pattern which is oriented towards the normal direction of the substrate surface, indicated that ZnO film was grown along this (002) orientation for sample B. SEM images of both samples showed that the ZnO film is ZnO nanorods with hexagonal wurtzite structure shape and sample A is clearly more randomly oriented than sample B. During the investigation of NO gas sensing performance, it is found that the highest response towards NO gas was occurred at a lower operating temperature of 200°C for sample B compared to a higher operating temperature of 300°C for sample A. Furthermore, sample B has a higher dynamic gas response and sensitivity than sample A. These results indicate that the (002) oriented ZnO film has a better performance than the randomly oriented ZnO film as NO gas sensor.

28 December 2019 in Fibers
Verified
Journal Article
Open access
PDF file
WSWidayani Sutrisno
Widayani Sutrisno
MRMitra Rahayu
Mitra Rahayu
DADamar Adhika
Damar Adhika
The aim of this study is to analyze the thermal properties of sago fiber-epoxy composite. The sago fiber-based composite has been prepared using epoxy resin as the matrix, via a simple mixing followed by compression. The compression process includes hot compression (100 °C/10 kgf cm−2) and cold compression (ambient/10 kgf cm−2). The composite series was prepared with 9%, 13%, 17%, 20%, and 23% (w/w) of epoxy resin. Microstructures of all materials used were observed using an SEM (scanning electron microscope) instrument. The thermal properties of the composite and its components were examined through TG/DTA characterization. The samples were heated using the heating rate of 10 °C/min from room temperature to 400 °C, except for epoxy resin, which was heated to 530 °C. TG/DTA results depict three stages of thermal processes of sago fiber-epoxy composite: evaporation of water molecules at below 100 °C with the peak point within the range of 51.3 and 57.3 °C, the damage of sago fiber within the range of 275 and 370 °C with the peak point within the range of 333.3 and 341.3 °C and the damage of epoxy resin at above 350 °C with the peak point at 376.2 °C.

20 March 2019 in Materials Research Express
Verified
Journal Article
Closed access
Fitriana FitrianaFitriana Fitriana
Fitriana Fitriana
NSNi Luh Wulan Septiani
Ni Luh Wulan Septiani
III. Irzaman
I. Irzaman
FFF. Ferdiansjah
F. Ferdiansjah
Mochamad Zakki FahmiMochamad Zakki Fahmi
Mochamad Zakki Fahmi
Brian YuliartoBrian Yuliarto
Brian Yuliarto

26 June 2015 in Microscopy
Verified
Journal Article
Open access
PDF file
DADamar Adhika
Damar Adhika
MTMasaki Tanaka
Masaki Tanaka
TDTakeshi Daio
Takeshi Daio
KHKenji Higashida
Kenji Higashida
The dislocation shielding field at a crack tip was experimentally proven at the atomic scale by measuring the local strain in front of the crack tip using high-resolution transmission electron microscopy (HRTEM) and geometric phase analysis (GPA). Single crystalline (110) silicon wafers were employed. Cracks were introduced using a Vickers indenter at room temperature. The crack tip region was observed using HRTEM followed by strain measurements using GPA. The measured strain field at the crack tip was compressive owing to dislocation shielding, which is in good agreement with the strain field calculated from elastic theory.